No edit summary
Line 35: Line 35:
Most other jump ropes cost at least $2
Most other jump ropes cost at least $2
You will be saving about 43% the cost.
You will be saving about 43% the cost.
==References==
* The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <nowiki> <ref> </ref> and <references/>  </nowiki>tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: <ref> web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html</ref>
<references/>
<nowiki>
Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health  care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in
[[Category:How tos]]
[[Category:Electricity]]
[[Category:Electric lighting]].
</nowiki>
[[category:OSAT 3D-Printable Designs]]

Revision as of 05:44, 18 April 2018

Title of the device or system

Project developed by [your name linked to your user account]
Add a status meter by copying the following templates (inside double curly brackets) into your page as you reach each step: status-design, status-prototype, status-deployed, status-model and status-verified....

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

Jump rope handles. What more is there to be said? Kids who need exercise and either can't go running or can't leave the house can use these handles if they find a rope. The idea came from the education tab in the UNICEF Supply Catalog where under physical education they had mostly kick balls which could be expensive to replace all the time because of constant use or if it were to get lost. This provides a cheap alternative for either single use or could be used to make a big jump rope for 3+ people at a time.

A cranford osat jump rope.JPG

Bill of Materials

You will need 35g of PLA filament. (About $1.15, varies on different suppliers) Media:a_cranford_jumprope_v3.FCStd

Tools needed for fabrication of the OSAT

  1. Jellybox or similar RepRap 3-D printer

Skills and Knowledge Necessary to Make the OSAT

None.

Technical Specifications and Assembly Instructions

When printing it's best to print the handles up-side down with the height at about 140mm (Z coordinate). It's safest to use a raft and print both at once to save time. It will take 4 hours and 8 minutes to print the both of them.

Common Problems and Solutions

Make sure to have a raft so it wont break off while printing.

Cost savings

It should cost around $1.15 for the filament. Most other jump ropes cost at least $2 You will be saving about 43% the cost.

Cookies help us deliver our services. By using our services, you agree to our use of cookies.