Warning: You are recreating a page that was previously deleted.

You should consider whether it is appropriate to continue editing this page. The deletion and move log for this page are provided here for convenience:

  • 18:11, 16 April 2021 PedroK talk contribs deleted page OSAT Hardware: Bike Grips (content was: "{{stub}} thumb|right|First CAD Design of print. <I chose to design some 3D-Printed bike handlebars for my Open Science Appropriate Technology Project.> Some introduction text and background can go here. == The Design process == I took apart my own bike's handlebars to determine what would be needed to replace them To make bullets use the asterisk: * Like this * and like this ** and two for the next indent * and back to one... == Project goals...")
Warning! You are not logged in. Log in or create an account to have your edits attributed to your username rather than your IP, along with other benefits.
Warning! All contributions to Appropedia are released under the CC-BY-SA-4.0 license unless otherwise noted (see Appropedia:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here! You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted material without permission!
Cancel Editing help (opens in new window)
Cookies help us deliver our services. By using our services, you agree to our use of cookies.