Literature review...

in progress...

Introduction[edit | edit source]

  • Additive Manufacturing
  • Extrusion
  • Extrusion of UV-sensitive materials
  • Auger-extruder
  • Open-source hardware
  • Part consolidation
  • Integrated functions (non-assemblies)

Sources[edit | edit source]

Books_________________________________________________________________________________

[1] I. Gibson, D. Rosen, and B. Stucker, Additive Manufacturing Technologies. 2008.

Journal Articles_________________________________________________________________________

Additive Manufacturing

[2] S. Mellor, L. Hao, and D. Zhang, “Additive manufacturing: A framework for implementation,” vol. 149, pp. 194–201, 2014.

[3] B. P. Conner et al., “Making sense of 3-D printing: Creating a map of additive manufacturing products and services,” Addit. Manuf., vol. 1, pp. 64–76, 2014.

[4] C. Achillas, D. Aidonis, E. Iakovou, M. Thymianidis, and D. Tzetzis, “A methodological framework for the inclusion of modern additive manufacturing into the production portfolio of a focused factory,” J. Manuf. Syst., vol. 37, pp. 328–339, 2015.

[5] R. Bogue, “3D printing: the dawn of a new era in manufacturing?,” Assem. Autom., vol. 33, no. 4, pp. 307–311, 2013.

[6] I. Campbell, D. Bourell, and I. Gibson, “Additive manufacturing: rapid prototyping comes of age,” Rapid Prototyp. J., vol. 18, no. 4, pp. 255–258, 2012.

Extrusion of UV-sensitive materials

[7] J. Holländer, R. Hakala, J. Suominen, N. Moritz, J. Yliruusi, and N. Sandler, “3D printed UV light cured polydimethylsiloxane devices for drug delivery,” Int. J. Pharm., 2017.

[8] “Potterbot 7 UV Paste 3D printer.” [Online]. Available: http://www.deltabots.com/products/v-25-uv-uv-paste-printer. [Accessed: 13-Nov-2017].

[9] C. Paper, “A New 3D Printing Technique Using Extrusion of Photopolymer,” no. January, 2017.

[10] M. Faes, H. Valkenaers, F. Vogeler, J. Vleugels, and E. Ferraris, “Extrusion-based 3D printing of ceramic components,” Procedia CIRP, vol. 28, pp. 76–81, 2015.

Auger-extruder

[11] J. Sun, W. Zhou, L. Yan, D. Huang, and L. ya Lin, “Extrusion-based food printing for digitalized food design and nutrition control,” J. Food Eng., vol. 220, pp. 1–11, 2016.

Open-source hardware

[12] R. Bogue, “What future for humans in assembly?,” Assem. Autom., vol. 34, no. 4, pp. 305–309, 2014.

[13] B. T. Wittbrodt et al., “Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers,” Mechatronics, vol. 23, no. 6, pp. 713–726, 2013.

[14] G. C. Anzalone, C. Zhang, B. Wijnen, P. G. Sanders, and J. M. Pearce, “A Low-Cost Open-Source Metal 3-D Printer,” Ieee Access, vol. 1, pp. 803–810, 2013.

[15] B. M. Tymrak, M. Kreiger, and J. M. Pearce, “Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions,” Mater. Des., vol. 58, pp. 242–246, 2014.

Part consolidation (Design for AM)

[16] S. Hällgren, L. Pejryd, and J. Ekengren, “(Re)Design for Additive Manufacturing,” Procedia CIRP, vol. 50, pp. 246–251, 2016.

[17] K. Salonitis, “Design for additive manufacturing based on the axiomatic design method,” Int. J. Adv. Manuf. Technol., vol. 87, no. 1–4, pp. 989–996, 2016.

Integrated functions

[18] J. Glasschroeder, E. Prager, and M. F. Zaeh, “Powder-bed-based 3D-printing of function integrated parts,” Rapid Prototyp. J., vol. 21, no. 2, pp. 207–215, 2015.

[19] X. Wei, Y. Tian, and A. Joneja, “A study on revolute joints in 3D-printed non-assembly mechanisms,” Rapid Prototyp. J., vol. 22, no. 6, pp. 901–933, 2016.

[20] X. Su, Y. Yang, D. Wang, and Y. Chen, “Digital assembly and direct fabrication of mechanism based on selective laser melting,” Rapid Prototyp. J., vol. 19, no. 3, pp. 166–172, 2013.

Searches[edit | edit source]

Google Scholar, Science Direct:

“principle of auger extruder”, “extrusion photopolymer”, “open-source hardware 3D printing”, “3D printing uv curing”, “integrated functions”, “Design for additive manufacturing”, “single screw extruder”, “non-assembly”

FA info icon.svg Angle down icon.svg Page data
Authors Kretzschmarni
License CC-BY-SA-3.0
Language English (en)
Related 0 subpages, 0 pages link here
Impact 263 page views
Created November 10, 2017 by Kretzschmarni
Modified February 23, 2024 by Felipe Schenone
Cookies help us deliver our services. By using our services, you agree to our use of cookies.