Force Testing Protocol:

Using an Instron 4206 Tensile Test Machine with a 10kN Load Cell

DOES NOT NEED CALIBRATION

  1. Set the raspberry pi to max current.
  2. Only put the plunger of the syringe in the pump, not the entire syringe.
  3. Place the pump, motor down, in a tensile strength tester. Set height to be just above the pump.
  4. Then tell the pump to push past the top plate.
  5. Record the force given in Newtons.
Cookies help us deliver our services. By using our services, you agree to our use of cookies.