FrankBeFay (talk | contribs) |
Kathy Nativi (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
{{777}} | {{777}} | ||
<!--infobox--> | |||
{{OpenKhowHowManifest | |||
|manifest-date-created= | |||
|manifest-date-updated=2020-06-04 | |||
|manifest-author-name=Kathy Nativi | |||
|manifest-author-affiliation=Appropedia | |||
|manifest-autho-email=info@appropedia.org | |||
|title=Mirco Lathe | |||
|description=This OSAT is a Micro Lathe. While in Beta, it is nearly parametric in order to scale to the supplies on hand, and can be altered to meet the needs of the end user. | |||
|intended-use= | |||
|keywords= | |||
|project-link= | |||
|contact-affiliation= | |||
|contact-appropedia-user=User:FrankBeFay | |||
|image=MicroLathe.jpg | |||
|development-stage= | |||
|made=No | |||
|made-independently=Yes | |||
|derivative-of= | |||
|manufacturing-files= | |||
|manifest-language=eng | |||
|date-published= | |||
|main-materials= | |||
|sustainable-development-goal= | |||
|documentation-language=eng | |||
}} | |||
<!--end infobox--> | |||
==Micro Lathe== | ==Micro Lathe== | ||
Created by [[User:FrankBeFay|FrankBeFay]] | Created by [[User:FrankBeFay|FrankBeFay]] |
Revision as of 16:48, 10 June 2020
Micro Lathe
Created by FrankBeFay Template:Statusboxtop Template:Status-design Template:Status-prototype Template:Status-Model Template:Status-verified Template:Boxbottom
Abstract
- This OSAT is a Micro Lathe. While in Beta, it is nearly parametric in order to scale to the supplies on hand, and can be altered to meet the needs of the end user.
- A complete frame (Version 1) can be seen to the right
Bill of Materials
To Be Determined
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
Skills and Knowledge Necessary to Make the OSAT
- There is no special skills needed to make this tool.
Technical Specifications and Assembly Instructions
- If any changes to the design want to be done, open the FreeCAD file and adjust the parameters.
- Slicing instructions
- Fill % = 25
- Speed = 70 mm/sec
- Layer Height = .25 mm
- Support Needed for Cross Slide
- Print time with above settings will be 24+ hours