J.M.Pearce (talk | contribs) mNo edit summary |
J.M.Pearce (talk | contribs) m (→Test Specimen) |
||
Line 14: | Line 14: | ||
= Test Specimen = | = Test Specimen = | ||
ASTM Type I specimen - [http://www.thingiverse.com/thing:13694 STL file] | ASTM Type I specimen - [http://www.thingiverse.com/thing:13694 STL file] | ||
== Printer settings to test == | |||
= Test Equipment = | = Test Equipment = |
Revision as of 08:07, 28 March 2012
Overview
The purpose of this project is to determine mechanical properties of polymer components printed with the open source RepRap Mendel 3-D printer. Standard test methods are to be used to gather accurate and acceptable test data. The results of the mechanical testing will be used for engineering analysis of parts designed to be created with the RepRap.
To Do
- Identify test standards
- Find available test facilities and equipment
- Literature review
Testing Standards
ASTM D638-10 Standard Test Method for Tensile Properties of Plastics
Test Specimen
ASTM Type I specimen - STL file
Printer settings to test
Test Equipment
See Also
- For electrical testing and for thermal conductivity :disc 2.5 inches in diameter that is 3.2 mm thick. 5X