J.M.Pearce (talk | contribs) mNo edit summary |
J.M.Pearce (talk | contribs) m (# Print your design on your RepRap using an appropriate fill for a human dangling from a cliff) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
# Download template SCAD for hex bolt: [http://www.thingiverse.com/thing:481050] | # Download template SCAD for hex bolt: [http://www.thingiverse.com/thing:481050] | ||
# Using [[OpenSCAD]] design an <u>'''original'''</u> rock wall hold better than [http://www.thingiverse.com/thing:481106 this]. No derivatives from any other design, no mashups, no importation of other code | # Using [[OpenSCAD]] design an <u>'''original'''</u> rock wall hold better than [http://www.thingiverse.com/thing:481106 this]. No derivatives from any other design, no mashups, no importation of other code | ||
# Post your SCAD, STL and a picture of your print (if you have it) on Thingiverse as a derivative of [http://www.thingiverse.com/thing:481050] using an appropriate OS license | |||
# Post your SCAD, STL and a picture of your print on Thingiverse as a derivative of [http://www.thingiverse.com/thing:481050] using an appropriate OS license | |||
Revision as of 13:10, 8 October 2019
This project is to design and print a rock wall hold.
- Create Thingiverse Account
- Download template SCAD for hex bolt: [1]
- Using OpenSCAD design an original rock wall hold better than this. No derivatives from any other design, no mashups, no importation of other code
- Post your SCAD, STL and a picture of your print (if you have it) on Thingiverse as a derivative of [2] using an appropriate OS license