Line 141: Line 141:


'''Module 3: Open source CAD'''
'''Module 3: Open source CAD'''
# OpenSCAD, [http://www.amazon.com/dp/B00I6K19OM]
# [http://www.openscad.org/ OpenSCAD], [http://en.wikibooks.org/wiki/OpenSCAD_User_Manual OpenSCAD manual], [http://www.amazon.com/dp/B00I6K19OM]
# Blender
# [http://www.blender.org/ Blender]
# FreeCAD
# [http://www.freecadweb.org/ FreeCAD]


'''Module 4: OS Science'''
'''Module 4: OS Science'''

Revision as of 17:50, 7 February 2014

coming soon -- under construction

Template:TOC hidden

MY4777/MY5777/EE4777/EE5777 Open-source 3-D printing

(Fall 2014)

Instructor: User:J.M.Pearce

Course Description

This course provides an introduction to distributed additive manufacturing using open-source 3-D printing. First this course will provide an overview of open-source hardware and technological development in theory and practice. Both the use of software and user communities will be highlighted and demonstrated. Next, the course will detail the design, use and maintenance of the open-source electronics behind the development of self-replicating rapid prototypers. Then the technological evolution of the open-source 3-D printing technology will be covered with a focus on developing innovation for improved performance and materials selection. Each student will build a customized RepRap and the course will cover hardware, firmware, slicing and printer controller software for operating and maintaining the device. Finally the material properties, applications and ramifications of RepRap technology will be discussed.

The course is meant for advanced undergraduate and graduate students in Materials Science & Engineering, and Electrical & Computer Engineering, while students in other areas of engineering or science with a strong interest in this topic are also welcomed. Graduate students are expected to complete all coursework assigned to the undergraduates and an in depth project.

Credits: 3.0 Lec-Rec-Lab: (3-0-[0-3]), (3 lecture hours and 0-3 lab hours)

Required Course Material

Handouts in class, on-line reading, and emailed pdfs. See hyperlinks in schedule.


Course Organization

This course will be run as an intense seminar meeting as a group. Students will be expected to read the course material before class and actively participate in discussions. The majority of class time will be spent on projects in a flipped class format.Each student will be responsible for building a RepRap to use to complete the projects. Short presentations will be given on each sub-topic in front of the group at the end of the semester.

Grading

Letter Grade Percentage Grade points/credit Rating
A 93% & above 4.00 Excellent
AB 88%– 92% 3.50 Very good
B 82% – 86% 3.00 Good
BC 76%– 81% 2.50 Above average
C 70% – 75% 2.00 Average
CD 65%– 69% 1.50 Below average
D 60%- 64% 1.00 Inferior
F 59% and below 0.00 Failure
I Incomplete; given only when a student is unable to complete a segment of the course because of circumstances beyond the student’s control. A grade of incomplete may be given only when approved in writing by the department chair or school dean.
X Conditional,with no grade points per credit; given only when the student is at fault in failing to complete a minor segment of a course, but in the judgment of the instructor does not need to repeat the course. It must be made up within the next semester in residence or the grade becomes a failure (F). A (X) grade is computed into the grade point average as a (F) grade.

Grading Policy

Grades will be based on the following:

RepRap build 200
Rock Wall Project 100
Celtic Project 100
Science Equipment Project 150
OSAT Project 150
Big Money Project 300
Total Points 1000
  • Grad students must also complete an improvement to the RepRap.

Late Assignments

Deduct 10% per day, up to 5 working days, then 0 grade. Only exception is for documented illness. Missed projects are penalized by the negative square of the percent total.

Course Policies

Appropriate behavior, attendance, participation and collaboration with your peers on group assignments is expected. Collaboration/Plagiarism Rules Collaboration is encouraged on the group project but the individual project and exams must be completed alone. Calculators are allowed for exams but electronic communication devices are prohibited.

University Policies

Academic regulations and procedures are governed by University policy. Academic dishonesty cases will be handled in accordance the University's policies. If you have a disability that could affect your performance in this class or that requires an accommodation under the Americans with Disabilities Act, please see me as soon as possible so that we can make appropriate arrangements. The Affirmative Action Office has asked that you be made aware of the following: Michigan Technological University complies with all federal and state laws and regulations regarding discrimination, including the Americans with Disabilities Act of 1990. If you have a disability and need a reasonable accommodation for equal access to education or services at Michigan Tech, please call the Dean of Students Office at 487-2212. For other concerns about discrimination, you may contact your advisor, Chair/Dean of your academic unit, or the Affirmative Programs Office at 487-3310.

Course Schedule

Please Note: Readings will be updated periodically before we get to the module.


Reading

Module 0: Introduction

  1. Watch RepRap video
  2. OSL Chap. 2 OSH Introduction, Cathedral and Bazaar, Microsoft OSH
  3. OSL Chap. 3 OS License
  4. OSL Chap. 4 OS microcontrollers Arduino Tutorials

Module 1: RepRap

  1. RepRap build OSL Chap. 5, or Delta Build Overview:MOST
  2. Slicers RepRap Magazine 1
  3. Printer controllers

Module 2: Community

  1. Free and open repositories of designs
  2. RepRap IRC, RepRap Forums, RepRap Groups
  3. Arduino Forum, Arduino google group
  4. Appropedia

Module 3: Open source CAD

  1. OpenSCAD, OpenSCAD manual, [1]
  2. Blender
  3. FreeCAD

Module 4: OS Science

  1. OSL Chap. 5
  2. OSL Chap. 6 examples

Module 5: OSAT

Module 6: Big Money

Jobs

Cookies help us deliver our services. By using our services, you agree to our use of cookies.