• Please complete the task and either 1) hyperlink to the page in our Appropedia space or 2) email Dr. Pearce and cross off the result
• Update task list every Wednesday by midnight.

Allie

Bas

• MOST RecycleBot Spooler
• Encryption method
• MOST RepRap
• pva recycling
• dual filament extrusion page
• recyclebot
• nephalometer

Ben

Brennan

• Finish solar racking paper
• Dial in laser speed and current
• Weld HXs
• Pull tensile samples

Chenlong

• write up cleaning experiments
• new glass etch - print Dr. Frost - send JMP recipe
• ALD lit search Atomic layer deposition literature review
• finish Open-source photoluminescence system
  • spectrometer Open source spectrometer:MOST

---

• MBE_protocol:MOST
• finish InGaN lit review InGaN material characterization literature review
• reprap chemistry

Joseph

• take a look at Ravi's board
• QE protocol:MOST
• help brennan
• MBE_protocol:MOST
• finish InGaN lit review - focus on devices --InGaN photovoltaics literature review
• write up Hall Effect protocol:MOST, post spreadsheet Dr. Moran

---

• open source charge controller
• set up biweekly meeting slc

Jephias

• Focussed_Ion_beam_(FIB)_protocol:_MOST
• Plasmonics for solar cell
• Spin Coater protocol

Ravi

• construct welder
• welding simulation paper

• forestry data logger
• Forest service PV system design-- appropedia summary page so others can copy - BOM, wiring, how to access data etc.
• Photovoltaic charging of ultracapacitors literature review - complete lit review
• Photovoltaic charging of ultracapacitors - project page
• Ultracapacitors: MOST - methods page, include spec sheets, safety, etc. for using ours.

---

Publications

• paper 1 - Photovoltaic charging of ultracapacitors
• paper 2 - Open source power electronics for a solar powered internet
  • Solar powered internet methods,
  • Solar powered Internet literature review
  • Generalizable Design guide for small-scale solar photovoltaic applications
• paper 3

Dr. Pearce

(W= waiting on reply) (add to bottom of list before waiting/triggers)

---

Deadlines

• June 10 IEEE PVSC
• June 24 EE lecture
• July 28 printer camp
• July 31 final draft book

---

grants

• http://www.trb.org/IDEAProgram/IDEAProgram.aspx
• http://www.mtu.edu/research/administration/vpr-office/internal-awards/c2e2/
• https://www.engineeringforchange.org/news/2013/01/11/ten_top_fundraising_platforms.html

---

To do

• rewrite PL/ellip

---

• pv annuity - w
• fuel cell - W
• trigger Queens PV
• Salt 2
• PV mount

Pending Projects

• http://en.wikipedia.org/wiki/Chemical_oxygen_demand

open design

• Build MakerScanner http://wiki.makerbot.com/makerscanner-building - fix light holder
• Set up Duel Boot on Netbook
• Learn Open Scad http://www.openscad.org/
• elaborate on Literature Search - feed Development_and_feasibility_of_applications_for_the_RepRap_3-D_printer
• purchase foam board and make measurement lines
• put together protocol for makerscanner to open source cad package --
• work on openscad designs

spectral pv

• Literature Search (Read Literature from Rob's work)
• Effects of spectral albedo on photovoltaic devices
• write SBDART protocol: MOST also see if we need to use this [1]
• translate code, verify
• run simulations

Open source hardware projects

• for publishing http://www.tandfonline.com/action/aboutThisJournal?show=abstractingIndexing&journalCode=list20
• finish filter wheel (work with Rodrigo)
• environmental chamber
• pin/nip flip
• electrode
• TiO2 test cell
• dremel fuge2
• dremel spincoater