- Please complete the task and either 1) hyperlink to the page in our Appropedia space or 2) email Dr. Pearce and
cross offthe result - Update task list every Wednesday by midnight.
Summer
Group meetings 3pm tues
Megan
Appropedia Pages
- Finish protocol pages - Mechanical testing of polymer components made with the RepRap 3-D printer, Tensile_test_protocol:_MOST, Create XRD protocol:MOST
- touch up ellip page with MTU info
XRD
- Write paragraph on what was done - XRD protocol:MOST
Ellipsometry
- write TS report - ellipsometery
- screenshots of testing conditions
- Refit ellipsometry data
Waiting on product key- Figure out what is wrong
Recyclebot
- LCA & Fix up for Meredith's Paper (PRIORITY #1)
Emailed Great Lakes Recycling to ask end product, waiting on response
RepRap
- coordinate mech team (Jerry, Megan, Paulo, Eric, me)
- Assign printing
- Assign testing
- 3 layer heights - .2, .3, .4; orientations 45, 90; 12 testing conditions; 10X each; 120 total tests.....
- PLA
- 0.4mm 90 deg (10 printed) 45 deg (0 printed)
- 0.3mm 90 deg (0 printed) 45 deg (0 printed)
- 0.2mm 90 deg (0 printed) 45 deg (0 printed)
- ABS
- 0.4mm 90 deg (5 printed) 45 deg (0 printed)
- 0.3mm 90 deg (0 printed) 45 deg (0 printed)
- 0.2mm 90 deg (0 printed) 45 deg (0 printed)
- ABS
- finish list for your thesis - compare contrast Life cycle analysis tools
Meredith
write paragraph or two summary of 3-D printing of electrically conductive materials literature reviewFinish - Life cycle analysis of polymer recycling literature review- Finish paper and project page for Life cycle analysis of distributed polymer recycling after recyclebot is up and energy tests completed
- Get standards from Dr. King - have them STL'd working through Jerry or me
- Make conductive polymers/mix/crack with Dr. King
Nick
print spine manipulator- finish filter wheel (work with Rodrigo)
- finish chopper wheel (work with Rodrigo)
- upkeep printers
- environmental chamber
- pin/nip flip
- electrode
- TiO2 test cell
- multiangle cell holder
- dremel fuge2
- dremel spincoater
- labjack
Paulo
- Find another source of frameless modules asap - send to Dr P
- coordinate with Ravi -- get Forestry service racking done/ordered
- Finish Finite element analysis: MOST -- add links to software, prices -- links to alternatives (open source), do an example of how to do all your steps on something simple - use screen shots. See Converting 2D images to 3D for printing using open source software for example
- Help finish protocol pages - Mechanical testing of polymer components made with the RepRap 3-D printer,
Tensile_test_protocol:_MOST - Set time to sit down with Dr. Pearce and talk about the Racking System assembly looking to the Solidworks file.
Ravi
- coordinate with Paulo -- get Forestry service racking done/ordered
- Forrest service PV system design-- appropedia summary page so others can copy - BOM, wiring, how to access data etc.
- Xoscillo: MOST - write detailed protocol for building and using, order necessary parts
- send me order list for electronics power
- Photovoltaic charging of ultracapacitors literature review - complete lit review
- Photovoltaic charging of ultracapacitors - project page
- Ultracapacitors: MOST - methods page, include spec sheets, safety, etc. for using ours.
Publications
- paper 1 - Photovoltaic charging of ultracapacitors
- paper 2 - Open source power electronics for a solar powered internet
- paper 3
Rodrigo
- Laser welding protocol: MOST and finish Open source laser system for polymeric welding
- test laser serial communication - get laser welder functioning
- work with Dr. Pearce on glass pressure design for laser welder
- help Nick with the filter wheel and the chopper wheel controls, electronics
- write tutorial with links here MOST Arduino Use
Xin
- Write encyclopedic article on Photoluminescence paying particular attention to theory necessary for the design of an apparatus
- Then begin this Open source PL:MOST - include full design, schematics, pictures of setup, and detailed instructions - validate with Dirk's results
- parts list to order
Fall
Allie
- start project/lit page -- start filling this in as you go Recyclebot - take pictures etc.
- Finish Life cycle analysis of polymer recycling literature review and Waste plastic extruder: literature review
- Thermocouple measurements protocol: MOST
- work on controls with our new collaborator
- Write a protocol for the whole thing -- get the system up and running with post extrusion protocol
- collect plastic
Brennan
- Detail your specific deviations MOST RepRap Build
- Literature review - RepRap Mechanical Testing Literature Review add standards
- write Tensile test protocol: MOST
- Put build documentation on project page - Mechanical testing of polymer components made with the RepRap 3-D printer
- Test Prints
- Dogbones: [1]
Michaela
- resend order form new format
- download 3d printer software and begin to learn
- meet with biz people
- create how to for biz start up
- learn an open source CAD package of your choice see list here -- see what you think of the web ones - https://tinkercad.com/
- when parts are in build printer - keep careful notes of time, difficulty, any variations from guide.
Dr. Pearce
(W= waiting on reply) (add to bottom of list before waiting/triggers)
Deadlines
To do
- order mbe
- press PVT trigger
- rewrite PL/ellip
- PVT dispatch
- outline open science
- finish/submit lca distribute recycling - w
- polish/submit silane - w
- pv off grid - w
- pv annuity - w
- exergy -w
- fuel cell - W
- trigger Queens PV
- Salt 2 - w
- nano redo?
- Enterprise - W
Pending Projects
open design
- Build MakerScanner http://wiki.makerbot.com/makerscanner-building - fix light holder
- Set up Duel Boot on Netbook
- Learn Open Scad http://www.openscad.org/
- elaborate on Literature Search - feed Development_and_feasibility_of_applications_for_the_RepRap_3-D_printer
- purchase foam board and make measurement lines
- put together protocol for makerscanner to open source cad package --
- work on openscad designs
spectral pv
- Literature Search (Read Literature from Rob's work)
- Effects of spectral albedo on photovoltaic devices
- write SBDART protocol: MOST also see if we need to use this [2]
- translate code, verify
- run simulations
Laser welding
- create a safety protocol - contact company - build Laser welding protocol - MOST, cabinet
- finish laser welder, order glass etc.
- Open source laser system for polymeric welding
InGaN
- Build Open source photoluminescence system
- light calibration
- Fill in MBE_protocol:MOST
- get the system cleaned, order chemicals for cleaning next week
- safety protocols, etc. add to MBE_protocol:MOST
- write up Hall Effect protocol:MOST, post spreadsheet