The MOST quad-delta RepRap is a deltabot RepRap built off of the Athena open source 3-D printer model that allows one to print 4 identical objects at the same time.
The design build of the system supported the following publication:
- Andre Laplume, Gerald C. Anzalone, Joshua M. Pearce. Open-source, self-replicating 3-D printer factory for small-business manufacturing. The International Journal of Advanced Manufacturing Technology. 85(1), pp 633-642 (2016). doi:10.1007/s00170-015-7970-9 free open access preprint
- Appropedia landing page: Open-source, self-replicating 3-D printer factory for small-business manufacturing
To build the system yourself use the following:
- The BOM in Appendix A and B: https://osf.io/52sxp/
- To build follow the basic parameters from Athena_Build_Overview substituting in the larger sections from the BOM and repeating 4x
- Latest version of Delta OpenSCAD code and Tool effector OpenSCAD code
- Run with Franklin open source software
| MOST quad delta RepRap |
|---|
| MOST quad delta RepRap large print |
|---|
