MOST delta-based metal printers SOP: Difference between revisions

Revision as of 16:56, 14 November 2016

Weld-based AM is similar to single-layer multi-pass welding, which involves passing a weld gun across the length of weld joint multiple times to build the weld (Easterling). In AM, this weld stands alone, rather than joining two parts. In weld-based AM, a specialized software called a slicer manipulates a 3D model in order to generate g-code. G-code contains a series of directions for the printer, which instruct the printer where to move, how fast to move, and where to deposit material. A weld-based printer can form a net shape by welding in a certain path in multiple layers.

Introduction

This procedure for delta-based metal printers is based on work done at MichiganTech with open-source metal 3D printers and custom RepRap driver Franklin.

Safety

Safety equipment is based off of standard MIG welding safety protocols [1]

Work Area

Use your metal 3D printer on a flat surface isolated from water and flammable materials.
Verify that you have proper grounding with a metal on metal connection to your substrate.
Ensure your gas cylinder is secured to an upright support or cart at all times and only use gas hoses designed for welding.
Eliminate clutter from the work area as you will be raining sparks everywhere. Minimize the number of cables underfoot to avoid tripping.
Examine hoses regularly for leaks, wear and loose connections and replace faulty lines. Spray with a soap and water mixture. Bubbles will show leaks.
Ensure proper ventilation of work area. Welding fumes are hazardous. In a home garage leave a door or window open and run a box fan as an exhaust to remove fumes from your breathing area. We have also used masks.

Safety gear

Wear safety glasses at all times while in the lab.
When printing and/looking at the printer while printing wear a welders mask/welding helmet (auto-darkening or flip-shade with current ANSI certification) or look at it using a webcam. Do not watch the printer with unprotected eyes!
Use pliers to pick up the substrate after printing or thick leather gloves
Always wear flame-resistant lab coat and heavy duty leather gloves when handling the printed parts
Wear leather shoes - high-tops (steel-toes are a bonus).

Metal 3D printing exposes you to welding for longer periods of time than is normal for routine welding. You should ensure that all of your skin is covered by something to avoid "sun burns".

Equipment or Bill of Materials

Information about how to construct a delta-based metal printer for under $1500 can be found here.

Delta-based metal printer
Clean substrate (aluminum or steel)
Bucket of water for quench
Tongs
PPE

Calibration & Tolerances

Information on how to calibrate a delta-based RepRap printer is found here.

Operation & Procedure

Shutdown

References

@@ Line 42: / Line 42: @@
 ==Calibration & Tolerances==
+Information on how to calibrate a delta-based RepRap printer is found [[Athena_Franklin#Calibration|here]].
 ==Operation & Procedure==