Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.
MOST Printer Log
|By Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source 3-D printing.
This page is dedicated to the printers in the MOST lab that are used for production. Due to the number of people we have going in and out of the group and room, and the volume of printing we need, it is important to keep a log of what breaks, and what is fixed with each printer.
- Add yourself to the list of users on each printer you intend on using for a sustained period of time
- When something breaks log it with the date, and what broke. If you don't know exactly what broke make a good guess.
- Ensure that once the problem has been fixed you add fixed at the end of the problem summary and change the status of the printer
- Do not remove information just because you fixed it. Keeping old information will help to document recurring problems.
- Red: Completely out of commission.
- Orange: Printing but with problems.
- Green: Good to go.
MOST Reprap (j-head)
MOST RepRap version 1
Type A Machines
- The thermistor gives the wrong temp. reading in Pronterface so any gcode must have the printing temp at about 172
- Do NOT adjust the base screws. Only adjust the bigger screw that controls the z-axis with slight movements.
- Thermistor connection gets messed up and the printer stops extruding because the temp is too low. FIXED Emily Hunt (talk) 07:31, 18 February 2014 (PST)
- Prints fine then keeps disconnecting for no apparent reason. Emily Hunt (talk) 10:40, 18 February 2014 (PST)