Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the MOST Delta RepRap design by the end of the semester. They will demonstrate their mods for the class.

For some ideas see: Github MTU-MOST repositories, Open-source syringe pump, Open-source metal 3-D printer

Instructions

  1. Add an image and hyperlink using double square brackets to the appropriate gallery below
  2. By clicking on the resultant red link create a page for your design
    1. Include the template {{777}} at the top of the page
    2. Include all the documentation needed to replicate your modification - use the class build pages as examples Delta Build Overview:MOST
    3. Include at least one photo
    4. If relevant include a Youtube video of operation/assembly or both
    5. Include tools needed
    6. Include a BOM
    7. Include clear instructions
    8. Include all SCAD and STL files for design improvement
    9. Link to any additional information (e.g. new software/firmware or slicing code at Github)

I am working on

  • short description and signature in bullet list
  • I am working on a heated bed and environment to print with ABS material- David Porter (talk) 06:49, 28 October 2014 (PDT)
  • I am working on designing a 3D printed covering for the controller board and the extruder drive against humidity, dust and other foreign particles which might deposit on the board and the teeths of the extruder over a period of time- Soham Sengupta
  • I am working on making the printer run wirelessly- Jayant Chalke
  • I am working on a fully printable, fully adjustable spool holder that will work for any type of filament.-rachael mcfarland
  • I am working on a solar powered 3D printer. This includes printing customizable and detachable solar panel holders/mounts, and protective casing for the controller board and power supply unit Jeff Gwamuri
  • I am working on a pause/override in the event of a rod being thrown during a print. --Bwbarker (talk) 06:03, 30 October 2014 (PDT)
  • I will be interfacing Beagleboneblack controller installed with debian/linux to the melzi controller so that it can work wirelessly without a need of computer. -Pankaj DeshmukhPrint Design (talk)
  • I will be working on a Bowden-style paste extruder for use in printing ceramics or edible sugar designs. By using the Bowden-style extruder, I hope to remove the weight concerns from the end effector.--Jmbrooki (talk) 07:22, 30 October 2014 (PDT)
  • I am working on making the calibration become automatic- YanGuo ZhineKang

Undergraduate Bonus Mods

Graduate Student Mods

Cookies help us deliver our services. By using our services, you agree to our use of cookies.