Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

MOST Delta mods

From Appropedia
Revision as of 05:11, 23 October 2014 by Rivu (Talk | Contributions) (I am working on)

Jump to: navigation, search
MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.

Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the MOST Delta RepRap design by the end of the semester. They will demonstrate their mods for the class.

For some ideas see: Github MTU-MOST repositories, Open-source syringe pump, Open-source metal 3-D printer


  1. Add an image and hyperlink using double square brackets to the appropriate gallery below
  2. By clicking on the resultant red link create a page for your design
    1. Include the template {{777}} at the top of the page
    2. Include all the documentation needed to replicate your modification - use the class build pages as examples Delta Build Overview:MOST
    3. Include at least one photo
    4. If relevant include a Youtube video of operation/assembly or both
    5. Include tools needed
    6. Include a BOM
    7. Include clear instructions
    8. Include all SCAD and STL files for design improvement
    9. Link to any additional information (e.g. new software/firmware or slicing code at Github)

I am working on

  • short description and signature in bullet list
  • I am working on a heated bed and environment to print with ABS material- David Porter
  • I am working on designing a 3D printed covering for the controller board and the extruder drive against humidity, dust and other foreign particles which might deposit on the board and the teeths of the extruder over a period of time- Soham Sengupta

Undergraduate Bonus Mods

MOST Delta in Dr. Pearce's Office  
Zeni Kinetics Plastic Filament Spool Holder by Andrew Wallis [2]  

Graduate Student Mods

Top view MOST Delta in Dr. Pearce's Office