Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

MOST Delta mods

From Appropedia
Revision as of 13:10, 11 December 2014 by Rivu (Talk | Contributions) (Graduate Student Mods)

Jump to: navigation, search
MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.



Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the MOST Delta RepRap design by the end of the semester. They will demonstrate their mods for the class.

For some ideas see: Github MTU-MOST repositories, Open-source syringe pump, Open-source metal 3-D printer

Instructions

  1. Add an image and hyperlink using double square brackets to the appropriate gallery below
  2. By clicking on the resultant red link create a page for your design
    1. Include the template {{777}} at the top of the page
    2. Include all the documentation needed to replicate your modification - use the class build pages as examples Delta Build Overview:MOST
    3. Include at least one photo
    4. If relevant include a Youtube video of operation/assembly or both
    5. Include tools needed
    6. Include a BOM
    7. Include clear instructions
    8. Include all SCAD and STL files for design improvement
    9. Link to any additional information (e.g. new software/firmware or slicing code at Github)

I am working on

  • short description and signature in bullet list
  • I am working on a heated bed and various other modifications- David Porter (talk) 06:49, 28 October 2014 (PDT)
  • I am working on designing a snap fit 3D printed covering for the controller board - Soham Sengupta
  • I am working on making the printer run wirelessly- Jayant Chalke
  • I am working on a fully printable, fully adjustable spool holder that will work for any type of filament.-rachael mcfarland
  • I am working on a solar powered 3D printer. This includes printing customizable and detachable solar panel holders/mounts, and protective casing for the controller board and power supply unit Jeff Gwamuri
  • I am working on a pause/override in the event of a rod being thrown during a print. --Bwbarker (talk) 06:03, 30 October 2014 (PDT)
  • I will be interfacing Beagleboneblack controller installed with debian/linux to the melzi controller so that it can work wirelessly without a need of computer. -Pankaj DeshmukhPrint Design (talk)
  • I am working on redesigning the arms and end effector to create a more robust, and interchangeable, system.--Jmbrooki (talk) 07:22, 30 October 2014 (PDT)
  • I am working on making the calibration become automatic- YanGuo ZhineKang
  • I am working on a universal spool holder that can work with at least 10 different brands of spools that mounts under the Delta box and only requires one allen set screw to adjust Amsteele (talk) 07:29, 30 October 2014 (PDT)Amsteele
  • I am working on making a nice and fully printable spool holder that can be used for multiple spools as well..

Undergraduate Bonus Mods

MOST Delta in Dr. Pearce's Office  
Zeni Kinetics Plastic Filament Spool Holder by Andrew Wallis [4]  
A different take on filament spool holder by Kyle Myszka [5]  

Graduate Student Mods

Top view MOST Delta in Dr. Pearce's Office