We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Difference between revisions of "MOST Delta mods"

From Appropedia
Jump to navigation Jump to search
m
 
(76 intermediate revisions by 24 users not shown)
Line 3: Line 3:
 
Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the [[Delta Build Overview:MOST|MOST Delta RepRap]] design by the end of the semester. They will demonstrate their mods for the class.
 
Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the [[Delta Build Overview:MOST|MOST Delta RepRap]] design by the end of the semester. They will demonstrate their mods for the class.
  
For some ideas see: [https://github.com/mtu-most?tab=repositories Github MTU-MOST repositories], [[Open-source syringe pump]], [[Open-source metal 3-D printer]]
+
For some ideas see: [https://github.com/mtu-most?tab=repositories Github MTU-MOST repositories], [[Open-source syringe pump]], [[Open-source metal 3-D printer]], [[Multi-material_additive_and_subtractive_prosumer_digital_fabrication_with_a_free_and_open-source_convertible_delta_RepRap_3-D_printer| Multimaterial additive and subtractive]]
  
 
==Instructions==
 
==Instructions==
Line 20: Line 20:
 
== I am working on ==
 
== I am working on ==
 
* short description and signature in bullet list
 
* short description and signature in bullet list
* I am working on a heated bed and various other modifications- [[User:Dport535|David Porter]] ([[User talk:Dport535|talk]]) 06:49, 28 October 2014 (PDT)
+
* Athena II- [[Direct drive extrusion hot end for flexible materials]] (Undergrad) [[User:Molson|Matthew Olson]] ([[User talk:Molson|talk]]) 06:42, 6 November 2018 (PST)
* I am working on designing a snap fit 3D printed covering for the controller board - Soham Sengupta
+
* Athena II - [[Carriage-Connecting Rod Sound Dampener.]] (Grad) [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:21, 6 November 2018 (PST)
* I am working on making the printer run wirelessly- Jayant Chalke
+
* Athena II - [[Athena Engraver mod]] (Grad) [[User:Sasank Potluri|Sasank Potluri]] ([[User talk:Sasank Potluri|talk]]) 18:59, 6 November 2018 (PST)
* I am working on a fully printable, fully adjustable spool holder that will work for any type of filament.-rachael mcfarland
+
 
*I am working on a solar powered 3D printer. This includes printing customizable and detachable solar panel holders/mounts, and protective casing for the controller board and power supply unit [[User:Jgwamuri|Jeff Gwamuri]]
+
=2019=
* I am working on a pause/override in the event of a rod being thrown during a print. --[[User:Bwbarker|Bwbarker]] ([[User talk:Bwbarker|talk]]) 06:03, 30 October 2014 (PDT)
+
 
* I will be interfacing Beagleboneblack controller installed with debian/linux to the melzi controller so that it can work wirelessly without a need of computer. -Pankaj Deshmukh[[User:Print Design|Print Design]] ([[User talk:Print Design|talk]])
+
==Graduate Mods==
* I am working on redesigning the arms and end effector to create a more robust, and interchangeable, system.--[[User:Jmbrooki|Jmbrooki]] ([[User talk:Jmbrooki|talk]]) 07:22, 30 October 2014 (PDT)
+
{{gallery
* I am working on making the calibration become automatic- YanGuo ZhineKang
+
|width=250
* I am working on a universal spool holder that can work with at least 10 different brands of spools that mounts under the Delta box and only requires one allen set screw to adjust [[User:Amsteele|Amsteele]] ([[User talk:Amsteele|talk]]) 07:29, 30 October 2014 (PDT)Amsteele
+
|height=250
* I am working on making a nice and fully printable spool holder that can be used for multiple spools as well..
+
|Image:LaserEngraverModForAthenaII.jpeg| [[Athena II Laser Engraver mod]]
 +
|
 +
}}
 +
 
 +
=2018=
 +
 
 +
==Graduate Mods==
 +
{{gallery
 +
|width=250
 +
|height=250
 +
|Image:AEM.jpg | [[Athena Engraver mod]]
 +
|Image:Direct drive.jpg | [[Direct drive extrusion hot end for flexible materials]]
 +
|Image:Attached To Printer.jpg | [[Carriage-Connecting Rod Sound Dampener.]]
 +
|
 +
}}
 +
 
 +
=2016=
 +
 
 +
==Graduate Mods==
 +
{{gallery
 +
|width=250
 +
|height=250
 +
|Image:Delta_Dampener1.jpg | [http://www.appropedia.org/Vibration_Dampener_(MOST_Delta:_Athena) Vibration Dampener]
 +
|Image:In_use.jpg | [http://www.appropedia.org/Quick-carrying-handle Quick Carrying Handle]
 +
|Image:20161128_174741.jpg| [http://www.appropedia.org/Rod_alarm Rod Alarm]
 +
|Image:Upgraded_Spool_Holder_WithSpool.jpg| [[Upgraded Spool Holder]]
 +
|Image:3 fans hot end holder-stl.PNG| [http://www.appropedia.org/Hot_end_holder_with_3_fans Hot end holder with 3 fans]
 +
|Image:FranklinInterface.jpg| [http://www.appropedia.org/Raspberry_Pi_Control_and_Wireless_Interface Raspberry Pi Control ]
 +
|Image:Kijenzi1.jpg| Climate Controlled Printer [http://www.appropedia.org/Climate_Controlled_printer]
 +
|image:Kijenzi.png|[[Development of a Resilient 3-D Printer for Humanitarian Crisis Response]]
 +
}}
 +
 
 +
==Undergraduate Mods==
 +
{{gallery
 +
|width=250
 +
|height=250
 +
|Image: Heated Print Bed.jpg | [[Athena Heated Print Bed]]
 +
|Image: Easter island dual extrusion.jpg | [[Athena Dual Extrusion Single Hotend]]
 +
}}
 +
 
 +
=2015=
 +
==Undergraduate bonus mods==
 +
 
 +
{{gallery
 +
|width=250
 +
|height=250
 +
|Image:Finalized_Smoke_Alarm_Delta_Mod.jpg| [http://www.appropedia.org/Integrated_Smoke_Alarm_Delta_Mod Integrated Smoke Alarm Delta Mod]
 +
|Image:24VHeatedBed.jpg| [http://www.appropedia.org/Athena_24V_Round_Heated_Bed Athena 24V Round Heated Bed - Post-class mod]
 +
}}
 +
 
 +
==Graduate mods==
 +
{{gallery
 +
|width=250
 +
|height=250
 +
|Image:Laser_tripwire.JPG | [http://www.appropedia.org/Laser_trip-wire_shutoff Laser trip-wire]
 +
|Image:Adjustable PCB Heated Bed.jpg | [http://www.appropedia.org/Adjustable_Heated_Bed Adjustable Heated Bed]
 +
|Image:concept for open to closed belt.png | [http://www.appropedia.org/Concept_for_making_closed_loop_belt_out_of_open_loop http://www.appropedia.org/Concept_for_making_closed_loop_belt_out_of_open_loop]
 +
|Image:Fan_holder.png | [http://www.appropedia.org/Hot end Fan holder]
 +
}}
 +
 
 +
=2014=
  
 
==Undergraduate Bonus Mods==
 
==Undergraduate Bonus Mods==
Line 38: Line 98:
 
|height=250
 
|height=250
 
|Image:Most-delta.JPG| MOST Delta in Dr. Pearce's Office
 
|Image:Most-delta.JPG| MOST Delta in Dr. Pearce's Office
|File:SpoolMain.JPG|Zeni Kinetics Plastic Filament Spool Holder by Andrew Wallis [http://www.thingiverse.com/thing:507872]
+
|Image:Eassy1.jpg| [[Auto-Clearance Adjustable Triple Hotend Effector]]
|File:spoolholder.JPG| A different take on filament spool holder by Kyle Myszka [http://www.thingiverse.com/thing:514724]
+
|File:SpoolMain.JPG| [http://www.thingiverse.com/thing:507872 Zeni Kinetics Plastic Filament Spool Holder] by Andrew Wallis
|File:Repetier_z_Probing.png| [http://www.appropedia.org/MOST_Delta_Auto_Bed_Leveling Auto Bed Leveling]}}
+
|File:spoolholder.JPG| [http://www.thingiverse.com/thing:514724]A different take on filament spool holder] by Kyle Myszka
 +
|File:Repetier_z_Probing.png| [http://www.appropedia.org/MOST_Delta_Auto_Bed_Leveling Auto Bed Leveling]
 +
}}
  
 
==Graduate Student Mods==
 
==Graduate Student Mods==
Line 52: Line 114:
 
|Image:Panel_mounting.JPG|[[ Solar Panels holders (Solar powered delta)]]  
 
|Image:Panel_mounting.JPG|[[ Solar Panels holders (Solar powered delta)]]  
 
|Image: Dporter most delta.JPG|[http://www.appropedia.org/MOST-Delta_Customization MOST-Delta Customization]
 
|Image: Dporter most delta.JPG|[http://www.appropedia.org/MOST-Delta_Customization MOST-Delta Customization]
|Image:RepRapCalibration.jpg|[[https://www.youtube.com/watch?v=EfwMYxg6v9M&feature=youtu.be RepRap Auto Calibration]]
+
|Image:RepRapCalibration.jpg|[http://www.appropedia.org/RepRap_Auto_Calibration  RepRap Auto Calibration]
 
|File:2014-12-10 19.46.26.jpg|[[Bluetooth Controlled MOST Delta]]  
 
|File:2014-12-10 19.46.26.jpg|[[Bluetooth Controlled MOST Delta]]  
 
|Image:Spool_holder1.jpg| [[3D printable spool holder]]
 
|Image:Spool_holder1.jpg| [[3D printable spool holder]]
|File:Melzi_Board_casing.JPG |[[3D Printed snap fit Melzi board casing]][[http://www.thingiverse.com/thing:588144]]
+
|File:Melzi_Board_casing.JPG |[[3D Printed snap fit Melzi board casing]][http://www.thingiverse.com/thing:588144]
 +
|Image:Spooler2.jpg| [[universal under-mounted spool holder for Delta Bot]]
 +
|File:Delta_heat_Shield.JPG|[[MOST_Delta_Performance_Mod]][http://www.appropedia.org/MOST_Delta_Performance_Mod]
 +
|File:Beagleboneblack.jpg|[[Running Delta 3D printer with BBB as Gcode sender system for Melzi Controller]][http://www.appropedia.org/Running_Delta_3D_printer_with_BBB_as_Gcode_sender_system_for_Melzi_Controller#Bill_of_Materials]
 
}}
 
}}

Latest revision as of 13:05, 12 December 2019

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.



Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the MOST Delta RepRap design by the end of the semester. They will demonstrate their mods for the class.

For some ideas see: Github MTU-MOST repositories, Open-source syringe pump, Open-source metal 3-D printer, Multimaterial additive and subtractive

Instructions[edit]

  1. Add an image and hyperlink using double square brackets to the appropriate gallery below
  2. By clicking on the resultant red link create a page for your design
    1. Include the template {{777}} at the top of the page
    2. Include all the documentation needed to replicate your modification - use the class build pages as examples Delta Build Overview:MOST
    3. Include at least one photo
    4. If relevant include a Youtube video of operation/assembly or both
    5. Include tools needed
    6. Include a BOM
    7. Include clear instructions
    8. Include all SCAD and STL files for design improvement
    9. Link to any additional information (e.g. new software/firmware or slicing code at Github)

I am working on[edit]

2019[edit]

Graduate Mods[edit]

2018[edit]

Graduate Mods[edit]

2016[edit]

Graduate Mods[edit]

Climate Controlled Printer [7]  

Undergraduate Mods[edit]

2015[edit]

Undergraduate bonus mods[edit]

Graduate mods[edit]

2014[edit]

Undergraduate Bonus Mods[edit]

MOST Delta in Dr. Pearce's Office  
[8]A different take on filament spool holder] by Kyle Myszka  

Graduate Student Mods[edit]

Top view MOST Delta in Dr. Pearce's Office