(18 intermediate revisions by 5 users not shown)
Line 3: Line 3:
Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the [[Delta Build Overview:MOST|MOST Delta RepRap]] design by the end of the semester. They will demonstrate their mods for the class.
Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the [[Delta Build Overview:MOST|MOST Delta RepRap]] design by the end of the semester. They will demonstrate their mods for the class.


For some ideas see: [https://github.com/mtu-most?tab=repositories Github MTU-MOST repositories], [[Open-source syringe pump]], [[Open-source metal 3-D printer]]
For some ideas see: [https://github.com/mtu-most?tab=repositories Github MTU-MOST repositories], [[Open-source syringe pump]], [[Open-source metal 3-D printer]], [[Multi-material_additive_and_subtractive_prosumer_digital_fabrication_with_a_free_and_open-source_convertible_delta_RepRap_3-D_printer| Multimaterial additive and subtractive]]


==Instructions==
==Instructions==
Line 20: Line 20:
== I am working on ==
== I am working on ==
* short description and signature in bullet list
* short description and signature in bullet list
* Athena II- [[Direct drive extrusion hot end for flexible materials]] (Undergrad) [[User:Molson|Matthew Olson]] ([[User talk:Molson|talk]]) 06:42, 6 November 2018 (PST)
* Athena II - [[Carriage-Connecting Rod Sound Dampener.]] (Grad) [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:21, 6 November 2018 (PST)
* Athena II - [[Athena Engraver mod]] (Grad) [[User:Sasank Potluri|Sasank Potluri]] ([[User talk:Sasank Potluri|talk]]) 18:59, 6 November 2018 (PST)
=2018=
==Graduate Mods==
{{gallery
|width=250
|height=250
|Image:AEM.jpg | [[Athena Engraver mod]]
|Image:Direct drive.jpg | [[Direct drive extrusion hot end for flexible materials]]
|Image:Attached To Printer.jpg | [[Carriage-Connecting Rod Sound Dampener.]]
|
}}


=2016=
=2016=
Line 32: Line 47:
|Image:Upgraded_Spool_Holder_WithSpool.jpg| [[Upgraded Spool Holder]]
|Image:Upgraded_Spool_Holder_WithSpool.jpg| [[Upgraded Spool Holder]]
|Image:3 fans hot end holder-stl.PNG| [http://www.appropedia.org/Hot_end_holder_with_3_fans Hot end holder with 3 fans]
|Image:3 fans hot end holder-stl.PNG| [http://www.appropedia.org/Hot_end_holder_with_3_fans Hot end holder with 3 fans]
|Image:Kijenzi1.jpg| [http://www.appropedia.org/Climate_Controlled_printer]
|Image:FranklinInterface.jpg| [http://www.appropedia.org/Raspberry_Pi_Control_and_Wireless_Interface Raspberry Pi Control ]
|Image:FranklinInterface.jpg| [http://www.appropedia.org/Raspberry_Pi_Control_and_Wireless_Interface Raspberry Pi Control ]
|Image:Kijenzi1.jpg| Climate Controlled Printer [http://www.appropedia.org/Climate_Controlled_printer]
|image:Kijenzi.png|[[Development of a Resilient 3-D Printer for Humanitarian Crisis Response]]
}}
}}



Revision as of 03:21, 19 December 2018

Graduate students (MY5777 and EE5777) will take the same lecture and projects as the undergraduates, however, they will also be expected to complete a significant improvement to the MOST Delta RepRap design by the end of the semester. They will demonstrate their mods for the class.

For some ideas see: Github MTU-MOST repositories, Open-source syringe pump, Open-source metal 3-D printer, Multimaterial additive and subtractive

Instructions

  1. Add an image and hyperlink using double square brackets to the appropriate gallery below
  2. By clicking on the resultant red link create a page for your design
    1. Include the template {{777}} at the top of the page
    2. Include all the documentation needed to replicate your modification - use the class build pages as examples Delta Build Overview:MOST
    3. Include at least one photo
    4. If relevant include a Youtube video of operation/assembly or both
    5. Include tools needed
    6. Include a BOM
    7. Include clear instructions
    8. Include all SCAD and STL files for design improvement
    9. Link to any additional information (e.g. new software/firmware or slicing code at Github)

I am working on

2018

Graduate Mods

2016

Graduate Mods

Undergraduate Mods

2015

Undergraduate bonus mods

Graduate mods

2014

Undergraduate Bonus Mods

Graduate Student Mods

Cookies help us deliver our services. By using our services, you agree to our use of cookies.