J.M.Pearce (talk | contribs) mNo edit summary |
J.M.Pearce (talk | contribs) mNo edit summary |
||
Line 4: | Line 4: | ||
* Lulzbot hexagon hotend $70 https://www.lulzbot.com/products/lulzbot-hexagon-hot-end | * Lulzbot hexagon hotend $70 https://www.lulzbot.com/products/lulzbot-hexagon-hot-end | ||
=OpenSCAD design== | ==OpenSCAD design== | ||
* | * OpenSCAD | ||
* STL | |||
==Build Instructions== | ==Build Instructions== |
Revision as of 10:47, 23 October 2015
BOM
- Lulzbot hexagon hotend $70 https://www.lulzbot.com/products/lulzbot-hexagon-hot-end
OpenSCAD design
- OpenSCAD
- STL
Build Instructions
Operating Instructions on a MOST Delta
To print in nylon using weed wacker filament do the following: