Revision as of 21:54, 10 December 2014

!This page is work in progress!!!

Introduction

This page describes my custom modifications to the MOST-Delta printer constructed at Michigan Technological University as part of the graduate level final project for MY4777/MY5777/EE4777/EE5777 Open-source 3-D printing . During initial construction of the printer I was immediately planning modifications to help with better print quality and to allow for various printed materials. Instead of a single modification I made multiple modifications to build my personalized printer to my specifications. Listed below are the list of modifications that were completed this semester:

203W Modified XBOX Power Supply
RepRap PCB MK2b heated bed
Borosilicate Glass Print Surface
Carbon Tie Rods
Aluminum Pulleys
ZeniKentics Spool mount
Plexi Glass Print enclosure

Bill of Materials

203W Modified XBOX Power Supply-Free
RepRap PCB MK2b heated bed-$12 MK2b Bed
Borosilicate Glass Print Surface-$23
Carbon Tie Rods w/ 3/8" ball berings-$3.50
Aluminum Pulleys- $22.5 EBay Link
ZeniKentics Spool mount- $350
Plexi Glass Print enclosure- $8

Source Files

Tools

Soldering Iron
Hobby Knife
Drill (w/ bits and drive set)
Allen Wrench Set

Consumables

PLA
Shrink Tube
Solder

@@ Line 28: / Line 28: @@
 =Bill of Materials=
 *203W Modified XBOX Power Supply-Free
-*RepRap PCB MK2b heated bed-$12
+*RepRap PCB MK2b heated bed-$12 [http://www.cisinks.com/printer-pcb-heatbed-mk2b-p-2964.html?gclid=CP_30567vMICFSxgMgod8moA4Q MK2b Bed]
 *Borosilicate Glass Print Surface-$23
 *Carbon Tie Rods w/ 3/8" ball berings-$3.50
-*Aluminum Pulleys- $15
+*Aluminum Pulleys- $22.5 [http://www.ebay.com/itm/like/231044277449?lpid=82 EBay Link]
 *ZeniKentics Spool mount- $350
 *Plexi Glass Print enclosure- $8

MOST-Delta Customization: Difference between revisions