(Created page with "==!This page is work in progress!!!== {{MOST}} {{777}} {{MOST-RepRap}} {{clear}} {{gallery |width=250 |height=250 |lines=1 |align = center |Image: |Image: |Image: |Image: }} ...") |
No edit summary |
||
| Line 17: | Line 17: | ||
=Introduction= | =Introduction= | ||
This page describes my custom modifications to the ''MOST-Delta printer''' constructed at Michigan Technological University as part of the graduate [[MY4777/MY5777/EE4777/EE5777 Open-source 3-D printing]] class project. During initial construction of the printer I was immediately planning modifications to help with better print quality and to allow for various printed materials. Instead of a single modification I made multiple modifications to build my personalized printer to my specifications. Listed below are the list of modifications that were completed this semester: | This page describes my custom modifications to the ''MOST-Delta printer''' constructed at Michigan Technological University as part of the graduate [[http://www.appropedia.org/MY4777 MY4777/MY5777/EE4777/EE5777 Open-source 3-D printing]] class project. During initial construction of the printer I was immediately planning modifications to help with better print quality and to allow for various printed materials. Instead of a single modification I made multiple modifications to build my personalized printer to my specifications. Listed below are the list of modifications that were completed this semester: | ||
*203W Modified XBOX Power Supply | *203W Modified XBOX Power Supply | ||
Revision as of 21:48, 10 December 2014
!This page is work in progress!!!
Introduction
This page describes my custom modifications to the MOST-Delta printer' constructed at Michigan Technological University as part of the graduate [MY4777/MY5777/EE4777/EE5777 Open-source 3-D printing] class project. During initial construction of the printer I was immediately planning modifications to help with better print quality and to allow for various printed materials. Instead of a single modification I made multiple modifications to build my personalized printer to my specifications. Listed below are the list of modifications that were completed this semester:
- 203W Modified XBOX Power Supply
- RepRap PCB MK2b heated bed
- Borosilicate Glass Print Surface
- Carbon Tie Rods
- Aluminum Pulleys
- ZeniKentics Spool mount
- Plexi Glass Print enclosure
Bill of Materials
- 203W Modified XBOX Power Supply-Free
- RepRap PCB MK2b heated bed-$12
- Borosilicate Glass Print Surface-$23
- Carbon Tie Rods w/ 3/8" ball berings-$3.50
- Aluminum Pulleys- $15
- ZeniKentics Spool mount- $350
- Plexi Glass Print enclosure- $8
Source Files
Tools
- Soldering Iron
- Hobby Knife
- Drill (w/ bits and drive set)
- Allen Wrench Set
Consumables
- PLA
- Shrink Tube
- Solder