(New page: == Introduction == Out of all the renewable and non-polluting sources solar power become the most the primary source of commercial power for everyone in the world to achieve the same hig...)
 
No edit summary
Line 1: Line 1:
== Introduction ==
== Introduction ==
   
   
Out of all the renewable and non-polluting sources solar power become the most the primary source of commercial power for everyone in the world to achieve the same high standard of living. Over the past 200 years the developed nations have vastly increased their creation of per capita income compared to the other nations. In parallel, the developed nations increased the use of commercial thermal power to ~6.9Kwt/person. In fact, most people in the developing nations use much less commercial thermal power and most have little (or) no access to electric power. By the year 2050, people will require at least 20,000 GWe of power. This requires approximately 60,000 GWt of conventional thermal power generation. Such enormous thermal energy consumption will exhaust economical recoverable deposits of coal, shale, oil, natural gas, uranium and thorium. As a result, of conventional systems become useless. Terrestrial renewable systems are always captive to global climate change induced by volcanoes, natural variation in regional climate, industrial haze and possibly even microclimates induced by large area collectors. Over the 21-st century, a global stand -alone system for renewable power would cost thousand of trillions of dollars to build and maintain. Energy costs could consume most of the world's wealth. We need a power system that is independent of earth's biosphere and provides an abundant energy at low cost. To do this man -kind must collect dependable solar power in space and reliably send it to receivers on earth. The MOON is the KEY.
Out of all the renewable and non-polluting sources solar power become the most the primary source of commercial power for everyone in the world to achieve the same high standard of living. Over the past 200 years the developed nations have vastly increased their creation of per capita income compared to the other nations. In parallel, the developed nations increased the use of commercial thermal power to ~6.9Kwt/person. In fact, most people in the developing nations use much less commercial thermal power and most have little (or) no access to electric power. By the year 2050, people will require at least 20,000 GWe of power. This requires approximately 60,000 GWt of conventional thermal power generation. Such enormous thermal energy consumption will exhaust economical recoverable deposits of coal, shale, oil, natural gas, uranium and thorium. As a result, of conventional systems become useless. Terrestrial renewable systems are always captive to global climate change induced by volcanoes, natural variation in regional climate, industrial haze and possibly even microclimates induced by large area collectors. Over the 21-st century, a global stand -alone system for renewable power would cost thousand of trillions of dollars to build and maintain. Energy costs could consume most of the world's wealth. We need a power system that is independent of earth's biosphere and provides an abundant energy at low cost. To do this man -kind must collect dependable solar power in space and reliably send it to receivers on earth. The MOON is the KEY.


== Lunar Solar Power Generation ==
Two general concepts have been proposed for delivering solar power to Earth from space. In one, Peter Glaser of Arthur D. Little, Inc. (Cambridge, MA), proposed in 1968 that a huge satellite in geosynchronous orbit around Earth could dependably gather solar power in space. In the second concept figure (1), discussed here, solar power would be collected on the moon. In both ideas, many different beams of 12cm wavelength microwaves would deliver power to receivers at sites located worldwide. Each receiver would supply commercial power to a given region. Such a receiver, called a rectenna, would consist of a large field of small rectifying antennas. A beam with a maximum intensity of less than 20% of noontime sunlight would deliver about 200 W to its local electric grid for every square meter of rectenna area.
Unlike sunlight, microwaves pass through rain, clouds, dust, and smoke. In both scenarios, power can be supplied to the rectenna at night Several thousand individual rectennas strategically located around the globe, with a total area of 100,000 km2, could continuously provide the 20 TW of electric power, or 2 kW per person, required for a prosperous world of 10 billion people in 2050. This surface area is 5% of the surface area that would be needed on Earth to generate 20 TW using the most advanced terrestrial solar-array technology of similar average capacity now envisioned. Rectennas are projected to cost approximately $0.004/kWeoh, which is less than one-tenth of the current cost of most commercial electric energy. This new electric power would be provided without any significant use of Earth's resources several types of solar power satellites have been proposed. They are projected, over 30 years, to deliver approximately 10,000 kWoh of electric energy to Earth for each kilogram of mass in orbit around the planet.
To sell electric energy at $0.01/ kWoh, less than $60 could be expended per kilogram to buy the components of the power satellites, ship them into space, assemble and maintain them, decommission the satellites, and finance all aspects of the space operations. To achieve this margin, launch and fabrication costs would have to be lowered by a factor of 10,000. Power prosperity would require a fleet of approximately 6,000 huge, solar-power satellites. The fleet would have more than 330,000 km2 of solar arrays on-orbit and a mass exceeding 300 million tones. By comparison, the satellite payloads and rocket bodies now in Earth geosynchronous orbit have a collective surface area of about 0.1 km2. The mass launch rate for a fleet of power satellites would have to be 40,000 times that achieved during the Apollo era by both the United States and the Soviet Union. A many decade development program would be required before commercial development could be considered.


== Present and Future Power Scenario ==
In 1975 Goeller and Weinberg published a fundamental paper on the relation of commercial power to economic prosperity. They estimated that an advanced economy could provide the full range of Goods and services to its population with 6kWt/person. As technology advances, the goods and services could be provided by ~2 kWe/person of electric power. There will be approximately 10 billion people in 2050.They must be supplied with ~6 kWt/person or ~2 kWe/person in order to achieve energy and economic prosperity. Present world capacity for commercial power must increase by a factor of ~5 by 2050 to 60 kWt or ~20 TWe (T=1012). Output must be maintained indefinitely. Conventional power systems are too expensive for the Developing Nations. Six kilowatts of thermal power now costs ~1,400 $/Y-person. This is ~50% of the average per capita income within the Developing Nations. Other major factors include the limited availability of fossil and nuclear fuels (4,000,000 GWt-Y) and the relatively low economic output from thermal energy (~ 0.25 $/kWt-h). Humans must transition to solar energy during first part of the 21st Century to extend the newly emerging world prosperity. However, solar and wind are intermittent and diffuse. Their energy output is too expensive to collect, store, and dependably distribute.


== Lunar Solar Collectors  ==
Fortunately, in the Lunar Solar Power (LSP) System, an appropriate, natural satellite is available for commercial development. The surface of Earth's moon receives 13,000 TW of absolutely predictable solar power. The LSP System uses 10 to 20 pairs of bases-one of each pair on the eastern edge and the other on the western edge of the moon, as seen from Earth-to collect on the order of 1% of the solar power reaching the lunar surface. The collected sunlight is converted to many low intensity beams of microwaves and directed to rectennas on Earth. Each rectenna converts the microwave power to electricity that is fed into the local electric grid. The system could easily deliver the 20 TW or more of electric power required by 10 billion people. Adequate knowledge of the moon and practical technologies has been available since the late 1970s to collect this power and beam it to Earth. Successful Earth-moon power beams are already in use by the Arecibo planetary radar, operating from Puerto Rico. This radio telescope periodically images the moon for mapping and other scientific studies with a radar beam whose intensity in Earth's atmosphere is 10% of the maximum proposed for the LSP System. Each lunar power base would be augmented by fields of solar converters located on the back side of the moon, 500 to 1,000 km beyond each visible edge and connected to the earthward power bases by electric transmission lines.
The moon receives sunlight continuously except during a full lunar eclipse, which occurs approximately once a year and lasts for less than three hours. Energy stored on Earth as hydrogen, synthetic gas, dammed water, and other forms could be released during a short eclipse. Each lunar power base consists of tens of thousands of power plots figure (2) distributed in an elliptical area to form fully segmented, phased-array radar that is solar-powered. Each demonstration power plot consists of four major subsystems. Solar cells collect sunlight, and buried electrical wires carry the solar energy as electric power to microwave generators.
These devices convert the solar electricity to microwaves of the correct phase and amplitude and then send the microwaves to screens that reflect microwave beams toward Earth. Rectennas located on Earth between 60º N and 60º S can receive power directly from the moon approximately 8 hours a day. Power could be received anywhere on Earth via a fleet of relay satellites in high inclination, eccentric orbits around Earth figure (1). A given relay satellite receives a power beam from the moon and retransmits multiple beams to several rectennas on Earth required by an alternative operation. This enables the region around each rectenna to receive power 24 hours a day. The relay satellites would require less than 1% of the surface area needed by a fleet of solar-power satellites in orbit around Earth. Synthetic-aperture radars, such as those flown on the Space Shuttle, have demonstrated the feasibility of multibeam transmission of pulsed power directed to Earth from orbit. Relay satellites may reflect the beam or may receive the beam, convert it in frequency and phasing and then, transmit a new beam to the rectenna. A retransmitter satellite may generate several beam and simultaneously service several rectennas. The orbital reflector and retransmitter satellites minimize the need on earth for long distance power lines. Relay satellites also minimize the area and mass of power handling equipments in orbit around earth. There by reducing the hazards of orbital debris to space vehicles and satellites.


== 3. Lunar Solar Power Generation ==


== Fabrication of Thin Film Crystalline Silicon Solar Cells ==
The silicon film is a proprietary process, and only a very general process is designed. The generic process consists of ceramic formation, metallurgical barrier formation, polycrystalline layer deposition, emitter diffusion and contact fabrication. The conductive ceramic substrate is fabricated from selected low-cost materials. The metallurgical barrier prevents the substrate impurities from entering and contaminating the active thin silicon layer. The randomly textured and highly reflecting metallurgical barrier improves light trapping. A suitable p- type doped 30 - 100micro-cm active layer is deposited from a liquid solution. Phosphorus and aluminium impurity gathering are used for bulk quality improvement. Cells with large areas of 240, 300 and 700 cm2 are developed. A cell with an area of 675 cm2 has demonstrated the record efficiency of 11.6 - 17.7%.
The waste products present in the lunar surface are silicon, iron, TiO2, etc. These products can be used as raw materials for solar cell fabrication. A special compound called anorthite is used for extracting the above said components. Carbothermal reduction of anorthite,
Carbon compounds can also be used to extract Oxygen, Fe, and TiO2 from Lunar Ilemenite. The iron is used for interconnect and TiO2 for anti reflect.


  Two general concepts have been proposed for delivering solar power to Earth from space. In one, Peter Glaser of Arthur D. Little, Inc. (Cambridge, MA), proposed in 1968 that a huge satellite in geosynchronous orbit around Earth could dependably gather solar power in space. In the second concept figure (1), discussed here, solar power would be collected on the moon. In both ideas, many different beams of 12cm wavelength microwaves would deliver power to receivers at sites located worldwide. Each receiver would supply commercial power to a given region. Such a receiver, called a rectenna, would consist of a large field of small rectifying antennas. A beam with a maximum intensity of less than 20% of noontime sunlight would deliver about 200 W to its local electric grid for every square meter of rectenna area.
  Unlike sunlight, microwaves pass through rain, clouds, dust, and smoke. In both scenarios, power can be supplied to the rectenna at night Several thousand individual rectennas strategically located around the globe, with a total area of 100,000 km2, could continuously provide the 20 TW of electric power, or 2 kW per person, required for a prosperous world of 10 billion people in 2050. This surface area is 5% of the surface area that would be needed on Earth to generate 20 TW using the most advanced terrestrial solar-array technology of similar average capacity now envisioned. Rectennas are projected to cost approximately $0.004/kWeoh, which is less than one-tenth of the current cost of most commercial electric energy. This new electric power would be provided without any significant use of Earth's resources several types of solar power satellites have been proposed. They are projected, over 30 years, to deliver approximately 10,000 kWoh of electric energy to Earth for each kilogram of mass in orbit around the planet.
  To sell electric energy at $0.01/ kWoh, less than $60 could be expended per kilogram to buy the components of the power satellites, ship them into space, assemble and maintain them, decommission the satellites, and finance all aspects of the space operations. To achieve this margin, launch and fabrication costs would have to be lowered by a factor of 10,000. Power prosperity would require a fleet of approximately 6,000 huge, solar-power satellites. The fleet would have more than 330,000 km2 of solar arrays on-orbit and a mass exceeding 300 million tones. By comparison, the satellite payloads and rocket bodies now in Earth geosynchronous orbit have a collective surface area of about 0.1 km2. The mass launch rate for a fleet of power satellites would have to be 40,000 times that achieved during the Apollo era by both the United States and the Soviet Union. A many decade development program would be required before commercial development could be considered.




== 4. Lunar Solar Collectors ==
== Microwave ==
For direct microwave wireless power transmission to the surface of the earth, a limited range of transmission frequencies is suitable. Frequencies above 6 GHz are subject to atmospheric attenuation and absorption, while frequencies below 2 GHz require excessively large apertures for transmission and reception. Efficient transmission requires the beam have a Gaussian power density. Transmission efficiency çb for Gaussian beams is related to the aperture sizes of the transmitting and receiving antennas: çb ~ 1- exp (-ô2) and ô = ðDtDr/ (4ëR) Where Dt is the transmitting array diameter, Dr is the receiving array diameter, çb .is the wavelength of transmission and R is the range of transmission. Frequencies other than 2.45 GHz, particularly 5.8 GHz and 35 GHz are being given greater attention as candidates for microwave wireless power transmission in studies and experiments. The mass and size of components and systems for the higher frequencies are attractive. However, the component efficiencies are less than for 2.45 GHz, and atmospheric attenuation, particularly with rain, is greater.




  Fortunately, in the Lunar Solar Power (LSP) System, an appropriate, natural satellite is available for commercial development. The surface of Earth's moon receives 13,000 TW of absolutely predictable solar power. The LSP System uses 10 to 20 pairs of bases-one of each pair on the eastern edge and the other on the western edge of the moon, as seen from Earth-to collect on the order of 1% of the solar power reaching the lunar surface. The collected sunlight is converted to many low intensity beams of microwaves and directed to rectennas on Earth. Each rectenna converts the microwave power to electricity that is fed into the local electric grid. The system could easily deliver the 20 TW or more of electric power required by 10 billion people. Adequate knowledge of the moon and practical technologies has been available since the late 1970s to collect this power and beam it to Earth. Successful Earth-moon power beams are already in use by the Arecibo planetary radar, operating from Puerto Rico. This radio telescope periodically images the moon for mapping and other scientific studies with a radar beam whose intensity in Earth's atmosphere is 10% of the maximum proposed for the LSP System. Each lunar power base would be augmented by fields of solar converters located on the back side of the moon, 500 to 1,000 km beyond each visible edge and connected to the earthward power bases by electric transmission lines.
== Cost Forecasting ==
  The moon receives sunlight continuously except during a full lunar eclipse, which occurs approximately once a year and lasts for less than three hours. Energy stored on Earth as hydrogen, synthetic gas, dammed water, and other forms could be released during a short eclipse. Each lunar power base consists of tens of thousands of power plots figure (2) distributed in an elliptical area to form fully segmented, phased-array radar that is solar-powered. Each demonstration power plot consists of four major subsystems. Solar cells collect sunlight, and buried electrical wires carry the solar energy as electric power to microwave generators.
To achieve low unit cost of energy, the lunar portions of the LSP System are made primarily of lunar derived components. Factories, fixed and mobile, are transported from the Earth to the Moon. High output greatly reduces the impact of high transportation costs from the Earth to the Moon. On the Moon the factories produce 100s to 1,000s of times their own mass in LSP components. Construction and operation of the rectennas on Earth constitutes greater than 90% of the engineering costs. Any handful of lunar dust and rocks contains at least 20% silicon, 40% oxygen, and 10% metals (iron, aluminum, etc.). Lunar dust can be used directly as thermal, electrical, and radiation shields, converted into glass, fiberglass, and ceramics, and processed chemically into its elements. Solar cells, electric wiring, some micro-circuitry components, and the reflector screens can be made out of lunar materials. Soil handling and glass production are the primary industrial operations. Selected micro circuitry can be supplied from Earth. Use of the Moon as a source of construction materials and as the platform on which to gather solar energy eliminates the need to build extremely large platforms in space. LSP components can be manufactured directly from the lunar materials and then immediately placed on site. This eliminates most of the packaging, transport, and reassembly of components delivered from Earth or the Moon to deep space. There is no need for a large manufacturing facility in deep space. The LSP System is the only likely means to provide 20 TWe of affordable electric power to Earth by 2050. According to criswell in the year 1996 lunar solar power reference design for 20,000GWe is shown in table (1). Its also noted that the total mass investment for electricity from lunar solar energy is less than for Terrestrial solar energy systems.
  These devices convert the solar electricity to microwaves of the correct phase and amplitude and then send the microwaves to screens that reflect microwave beams toward Earth. Rectennas located on Earth between 60º N and 60º S can receive power directly from the moon approximately 8 hours a day. Power could be received anywhere on Earth via a fleet of relay satellites in high inclination, eccentric orbits around Earth figure (1). A given relay satellite receives a power beam from the moon and retransmits multiple beams to several rectennas on Earth required by an alternative operation. This enables the region around each rectenna to receive power 24 hours a day. The relay satellites would require less than 1% of the surface area needed by a fleet of solar-power satellites in orbit around Earth. Synthetic-aperture radars, such as those flown on the Space Shuttle, have demonstrated the feasibility of multibeam transmission of pulsed power directed to Earth from orbit. Relay satellites may reflect the beam or may receive the beam, convert it in frequency and phasing and then, transmit a new beam to the rectenna. A retransmitter satellite may generate several beam and simultaneously service several rectennas. The orbital reflector and retransmitter satellites minimize the need on earth for long distance power lines. Relay satellites also minimize the area and mass of power handling equipments in orbit around earth. There by reducing the hazards of orbital debris to space vehicles and satellites.
 
 
== 5. Fabrication of Thin Film Crystalline Silicon Solar Cells==
 
  The silicon film is a proprietary process, and only a very general process is designed. The generic process consists of ceramic formation, metallurgical barrier formation, polycrystalline layer deposition, emitter diffusion and contact fabrication. The conductive ceramic substrate is fabricated from selected low-cost materials. The metallurgical barrier prevents the substrate impurities from entering and contaminating the active thin silicon layer. The randomly textured and highly reflecting metallurgical barrier improves light trapping. A suitable p- type doped 30 - 100micro-cm active layer is deposited from a liquid solution. Phosphorus and aluminium impurity gathering are used for bulk quality improvement. Cells with large areas of 240, 300 and 700 cm2 are developed. A cell with an area of 675 cm2 has demonstrated the record efficiency of 11.6 - 17.7%.
  The waste products present in the lunar surface are silicon, iron, TiO2, etc. These products can be used as raw materials for solar cell fabrication. A special compound called anorthite is used for extracting the above said components. Carbothermal reduction of anorthite,
 
  Carbon compounds can also be used to extract Oxygen, Fe, and TiO2 from Lunar Ilemenite. The iron is used for interconnect and TiO2 for anti reflect.
 
 
== 6. Microwave ==
 
 
  For direct microwave wireless power transmission to the surface of the earth, a limited range of transmission frequencies is suitable. Frequencies above 6 GHz are subject to atmospheric attenuation and absorption, while frequencies below 2 GHz require excessively large apertures for transmission and reception. Efficient transmission requires the beam have a Gaussian power density. Transmission efficiency çb for Gaussian beams is related to the aperture sizes of the transmitting and receiving antennas: çb ~ 1- exp (-ô2) and ô = ðDtDr/ (4ëR) Where Dt is the transmitting array diameter, Dr is the receiving array diameter, çb .is the wavelength of transmission and R is the range of transmission. Frequencies other than 2.45 GHz, particularly 5.8 GHz and 35 GHz are being given greater attention as candidates for microwave wireless power transmission in studies and experiments. The mass and size of components and systems for the higher frequencies are attractive. However, the component efficiencies are less than for 2.45 GHz, and atmospheric attenuation, particularly with rain, is greater.
 
 
== 7. Cost Forecasting ==
 
 
  To achieve low unit cost of energy, the lunar portions of the LSP System are made primarily of lunar derived components. Factories, fixed and mobile, are transported from the Earth to the Moon. High output greatly reduces the impact of high transportation costs from the Earth to the Moon. On the Moon the factories produce 100s to 1,000s of times their own mass in LSP components. Construction and operation of the rectennas on Earth constitutes greater than 90% of the engineering costs. Any handful of lunar dust and rocks contains at least 20% silicon, 40% oxygen, and 10% metals (iron, aluminum, etc.). Lunar dust can be used directly as thermal, electrical, and radiation shields, converted into glass, fiberglass, and ceramics, and processed chemically into its elements. Solar cells, electric wiring, some micro-circuitry components, and the reflector screens can be made out of lunar materials. Soil handling and glass production are the primary industrial operations. Selected micro circuitry can be supplied from Earth. Use of the Moon as a source of construction materials and as the platform on which to gather solar energy eliminates the need to build extremely large platforms in space. LSP components can be manufactured directly from the lunar materials and then immediately placed on site. This eliminates most of the packaging, transport, and reassembly of components delivered from Earth or the Moon to deep space. There is no need for a large manufacturing facility in deep space. The LSP System is the only likely means to provide 20 TWe of affordable electric power to Earth by 2050. According to criswell in the year 1996 lunar solar power reference design for 20,000GWe is shown in table (1). Its also noted that the total mass investment for electricity from lunar solar energy is less than for Terrestrial solar energy systems.
Terrestrial Thermal power system - 310,000 tones / GWe.
Terrestrial Thermal power system - 310,000 tones / GWe.
Terrestrial Photovoltaic - 430,000 tones / GWe.
Terrestrial Photovoltaic - 430,000 tones / GWe.
Lunar solar power - 52,000 tones / GWe.
Lunar solar power - 52,000 tones / GWe.

Revision as of 21:33, 6 December 2007

Introduction

Out of all the renewable and non-polluting sources solar power become the most the primary source of commercial power for everyone in the world to achieve the same high standard of living. Over the past 200 years the developed nations have vastly increased their creation of per capita income compared to the other nations. In parallel, the developed nations increased the use of commercial thermal power to ~6.9Kwt/person. In fact, most people in the developing nations use much less commercial thermal power and most have little (or) no access to electric power. By the year 2050, people will require at least 20,000 GWe of power. This requires approximately 60,000 GWt of conventional thermal power generation. Such enormous thermal energy consumption will exhaust economical recoverable deposits of coal, shale, oil, natural gas, uranium and thorium. As a result, of conventional systems become useless. Terrestrial renewable systems are always captive to global climate change induced by volcanoes, natural variation in regional climate, industrial haze and possibly even microclimates induced by large area collectors. Over the 21-st century, a global stand -alone system for renewable power would cost thousand of trillions of dollars to build and maintain. Energy costs could consume most of the world's wealth. We need a power system that is independent of earth's biosphere and provides an abundant energy at low cost. To do this man -kind must collect dependable solar power in space and reliably send it to receivers on earth. The MOON is the KEY.

Lunar Solar Power Generation

Two general concepts have been proposed for delivering solar power to Earth from space. In one, Peter Glaser of Arthur D. Little, Inc. (Cambridge, MA), proposed in 1968 that a huge satellite in geosynchronous orbit around Earth could dependably gather solar power in space. In the second concept figure (1), discussed here, solar power would be collected on the moon. In both ideas, many different beams of 12cm wavelength microwaves would deliver power to receivers at sites located worldwide. Each receiver would supply commercial power to a given region. Such a receiver, called a rectenna, would consist of a large field of small rectifying antennas. A beam with a maximum intensity of less than 20% of noontime sunlight would deliver about 200 W to its local electric grid for every square meter of rectenna area. Unlike sunlight, microwaves pass through rain, clouds, dust, and smoke. In both scenarios, power can be supplied to the rectenna at night Several thousand individual rectennas strategically located around the globe, with a total area of 100,000 km2, could continuously provide the 20 TW of electric power, or 2 kW per person, required for a prosperous world of 10 billion people in 2050. This surface area is 5% of the surface area that would be needed on Earth to generate 20 TW using the most advanced terrestrial solar-array technology of similar average capacity now envisioned. Rectennas are projected to cost approximately $0.004/kWeoh, which is less than one-tenth of the current cost of most commercial electric energy. This new electric power would be provided without any significant use of Earth's resources several types of solar power satellites have been proposed. They are projected, over 30 years, to deliver approximately 10,000 kWoh of electric energy to Earth for each kilogram of mass in orbit around the planet. To sell electric energy at $0.01/ kWoh, less than $60 could be expended per kilogram to buy the components of the power satellites, ship them into space, assemble and maintain them, decommission the satellites, and finance all aspects of the space operations. To achieve this margin, launch and fabrication costs would have to be lowered by a factor of 10,000. Power prosperity would require a fleet of approximately 6,000 huge, solar-power satellites. The fleet would have more than 330,000 km2 of solar arrays on-orbit and a mass exceeding 300 million tones. By comparison, the satellite payloads and rocket bodies now in Earth geosynchronous orbit have a collective surface area of about 0.1 km2. The mass launch rate for a fleet of power satellites would have to be 40,000 times that achieved during the Apollo era by both the United States and the Soviet Union. A many decade development program would be required before commercial development could be considered.


Lunar Solar Collectors

Fortunately, in the Lunar Solar Power (LSP) System, an appropriate, natural satellite is available for commercial development. The surface of Earth's moon receives 13,000 TW of absolutely predictable solar power. The LSP System uses 10 to 20 pairs of bases-one of each pair on the eastern edge and the other on the western edge of the moon, as seen from Earth-to collect on the order of 1% of the solar power reaching the lunar surface. The collected sunlight is converted to many low intensity beams of microwaves and directed to rectennas on Earth. Each rectenna converts the microwave power to electricity that is fed into the local electric grid. The system could easily deliver the 20 TW or more of electric power required by 10 billion people. Adequate knowledge of the moon and practical technologies has been available since the late 1970s to collect this power and beam it to Earth. Successful Earth-moon power beams are already in use by the Arecibo planetary radar, operating from Puerto Rico. This radio telescope periodically images the moon for mapping and other scientific studies with a radar beam whose intensity in Earth's atmosphere is 10% of the maximum proposed for the LSP System. Each lunar power base would be augmented by fields of solar converters located on the back side of the moon, 500 to 1,000 km beyond each visible edge and connected to the earthward power bases by electric transmission lines. The moon receives sunlight continuously except during a full lunar eclipse, which occurs approximately once a year and lasts for less than three hours. Energy stored on Earth as hydrogen, synthetic gas, dammed water, and other forms could be released during a short eclipse. Each lunar power base consists of tens of thousands of power plots figure (2) distributed in an elliptical area to form fully segmented, phased-array radar that is solar-powered. Each demonstration power plot consists of four major subsystems. Solar cells collect sunlight, and buried electrical wires carry the solar energy as electric power to microwave generators. These devices convert the solar electricity to microwaves of the correct phase and amplitude and then send the microwaves to screens that reflect microwave beams toward Earth. Rectennas located on Earth between 60º N and 60º S can receive power directly from the moon approximately 8 hours a day. Power could be received anywhere on Earth via a fleet of relay satellites in high inclination, eccentric orbits around Earth figure (1). A given relay satellite receives a power beam from the moon and retransmits multiple beams to several rectennas on Earth required by an alternative operation. This enables the region around each rectenna to receive power 24 hours a day. The relay satellites would require less than 1% of the surface area needed by a fleet of solar-power satellites in orbit around Earth. Synthetic-aperture radars, such as those flown on the Space Shuttle, have demonstrated the feasibility of multibeam transmission of pulsed power directed to Earth from orbit. Relay satellites may reflect the beam or may receive the beam, convert it in frequency and phasing and then, transmit a new beam to the rectenna. A retransmitter satellite may generate several beam and simultaneously service several rectennas. The orbital reflector and retransmitter satellites minimize the need on earth for long distance power lines. Relay satellites also minimize the area and mass of power handling equipments in orbit around earth. There by reducing the hazards of orbital debris to space vehicles and satellites.


Fabrication of Thin Film Crystalline Silicon Solar Cells

The silicon film is a proprietary process, and only a very general process is designed. The generic process consists of ceramic formation, metallurgical barrier formation, polycrystalline layer deposition, emitter diffusion and contact fabrication. The conductive ceramic substrate is fabricated from selected low-cost materials. The metallurgical barrier prevents the substrate impurities from entering and contaminating the active thin silicon layer. The randomly textured and highly reflecting metallurgical barrier improves light trapping. A suitable p- type doped 30 - 100micro-cm active layer is deposited from a liquid solution. Phosphorus and aluminium impurity gathering are used for bulk quality improvement. Cells with large areas of 240, 300 and 700 cm2 are developed. A cell with an area of 675 cm2 has demonstrated the record efficiency of 11.6 - 17.7%. The waste products present in the lunar surface are silicon, iron, TiO2, etc. These products can be used as raw materials for solar cell fabrication. A special compound called anorthite is used for extracting the above said components. Carbothermal reduction of anorthite, Carbon compounds can also be used to extract Oxygen, Fe, and TiO2 from Lunar Ilemenite. The iron is used for interconnect and TiO2 for anti reflect.


Microwave

For direct microwave wireless power transmission to the surface of the earth, a limited range of transmission frequencies is suitable. Frequencies above 6 GHz are subject to atmospheric attenuation and absorption, while frequencies below 2 GHz require excessively large apertures for transmission and reception. Efficient transmission requires the beam have a Gaussian power density. Transmission efficiency çb for Gaussian beams is related to the aperture sizes of the transmitting and receiving antennas: çb ~ 1- exp (-ô2) and ô = ðDtDr/ (4ëR) Where Dt is the transmitting array diameter, Dr is the receiving array diameter, çb .is the wavelength of transmission and R is the range of transmission. Frequencies other than 2.45 GHz, particularly 5.8 GHz and 35 GHz are being given greater attention as candidates for microwave wireless power transmission in studies and experiments. The mass and size of components and systems for the higher frequencies are attractive. However, the component efficiencies are less than for 2.45 GHz, and atmospheric attenuation, particularly with rain, is greater.


Cost Forecasting

To achieve low unit cost of energy, the lunar portions of the LSP System are made primarily of lunar derived components. Factories, fixed and mobile, are transported from the Earth to the Moon. High output greatly reduces the impact of high transportation costs from the Earth to the Moon. On the Moon the factories produce 100s to 1,000s of times their own mass in LSP components. Construction and operation of the rectennas on Earth constitutes greater than 90% of the engineering costs. Any handful of lunar dust and rocks contains at least 20% silicon, 40% oxygen, and 10% metals (iron, aluminum, etc.). Lunar dust can be used directly as thermal, electrical, and radiation shields, converted into glass, fiberglass, and ceramics, and processed chemically into its elements. Solar cells, electric wiring, some micro-circuitry components, and the reflector screens can be made out of lunar materials. Soil handling and glass production are the primary industrial operations. Selected micro circuitry can be supplied from Earth. Use of the Moon as a source of construction materials and as the platform on which to gather solar energy eliminates the need to build extremely large platforms in space. LSP components can be manufactured directly from the lunar materials and then immediately placed on site. This eliminates most of the packaging, transport, and reassembly of components delivered from Earth or the Moon to deep space. There is no need for a large manufacturing facility in deep space. The LSP System is the only likely means to provide 20 TWe of affordable electric power to Earth by 2050. According to criswell in the year 1996 lunar solar power reference design for 20,000GWe is shown in table (1). Its also noted that the total mass investment for electricity from lunar solar energy is less than for Terrestrial solar energy systems. Terrestrial Thermal power system - 310,000 tones / GWe. Terrestrial Photovoltaic - 430,000 tones / GWe. Lunar solar power - 52,000 tones / GWe.

Cookies help us deliver our services. By using our services, you agree to our use of cookies.