No edit summary |
J.M.Pearce (talk | contribs) mNo edit summary |
||
| Line 5: | Line 5: | ||
Authored by Samantha Dertinger and Nicki Gallup | Authored by Samantha Dertinger and Nicki Gallup | ||
[[File:BioPrinter_Lulz.jpg]] | [[File:BioPrinter_Lulz.jpg|500px]] | ||
Test Run 1: | Test Run 1: | ||
Measure out approximately 98 mL of deionized water, supplied by the Michigan Technological University's Microfabrication Facility. | Measure out approximately 98 mL of deionized water, supplied by the Michigan Technological University's Microfabrication Facility. | ||
Add 0.02 g of blue dye to give it some color. so we can see what we are printing. | Add 0.02 g of blue dye to give it some color. so we can see what we are printing. | ||
Slowly add in 2.0 g of Sodium Alginate in increments. Magnetic spinner inside of the beaker and let it stir for a few hours. | Slowly add in 2.0 g of Sodium Alginate in increments. Magnetic spinner inside of the beaker and let it stir for a few hours. | ||
Revision as of 16:26, 1 October 2019
Lulzbot Bioprinter Study
Authored by Samantha Dertinger and Nicki Gallup
Test Run 1:
Measure out approximately 98 mL of deionized water, supplied by the Michigan Technological University's Microfabrication Facility.
Add 0.02 g of blue dye to give it some color. so we can see what we are printing.
Slowly add in 2.0 g of Sodium Alginate in increments. Magnetic spinner inside of the beaker and let it stir for a few hours.