Linear actuator:MOST: Revision history

2 March 2022

• curprev 18:1418:14, 2 March 2022‎ Page script talk contribs‎ 6,416 bytes +1‎ Move Template:Page data to the bottom undo

13 December 2021

• curprev 13:5413:54, 13 December 2021‎ Page script talk contribs‎ 6,415 bytes +15‎ Add Template:Page data undo

13 January 2021

• curprev 18:3018:30, 13 January 2021‎ Sophivorus talk contribs‎ m 6,400 bytes 0‎ Text replacement - "[[category:" to "[[Category:" undo

15 September 2014

• curprev 15:0815:08, 15 September 2014‎ G.niezen talk contribs‎ 6,400 bytes +1,354‎ Added info on printing the parts; added link to build instructions undo
• curprev 14:5614:56, 15 September 2014‎ G.niezen talk contribs‎ 5,046 bytes +359‎ Added software setup undo
• curprev 14:4814:48, 15 September 2014‎ G.niezen talk contribs‎ 4,687 bytes +816‎ Added Bill of Materials undo

22 July 2013

• curprev 16:1916:19, 22 July 2013‎ Wijnen talk contribs‎ 3,871 bytes +178‎ →‎Calibration undo
• curprev 16:1116:11, 22 July 2013‎ Wijnen talk contribs‎ 3,693 bytes +201‎ Descibe pololu calibration undo

13 July 2013

• curprev 00:1600:16, 13 July 2013‎ J.M.Pearce talk contribs‎ m 3,492 bytes +28‎ No edit summary undo

11 July 2013

• curprev 20:2820:28, 11 July 2013‎ Wijnen talk contribs‎ 3,464 bytes +3,464‎ Created page with "This page describes the linear actuator that the MOST group made from 3-D printed parts. In particular, it explains how to use it as a syringe pump and a microscope stage. ==Ha..."