(47 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{MOST}}
{{MOST}}
{{MOST-RepRap}}
[[category:MOST completed projects and publications]]
[[category:MOST completed projects and publications]]


Line 10: Line 11:
   
   
==Source==
==Source==
B.T. Wittbrodt, A.G. Glover, J. Laureto, G.C. Anzalone, D. Oppliger, J.L. Irwin, J.M. Pearce (2013), Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers, ''Mechatronics'', 2013 (in press). http://dx.doi.org/10.1016/j.mechatronics.2013.06.002
B.T. Wittbrodt, A.G. Glover, J. Laureto, G.C. Anzalone, D. Oppliger, J.L. Irwin, J.M. Pearce (2013), Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers, ''Mechatronics'', 23 (2013), pp. 713-726. http://dx.doi.org/10.1016/j.mechatronics.2013.06.002
* [http://www.academia.edu/4067796/Life-Cycle_Economic_Analysis_of_Distributed_Manufacturing_with_Open-Source_3-D_Printers open access]
* [http://www.academia.edu/4067796/Life-Cycle_Economic_Analysis_of_Distributed_Manufacturing_with_Open-Source_3-D_Printers open access]
* [http://www.sciencedirect.com/science/article/pii/S0957415813001153 audio slide summary]
* [http://www.sciencedirect.com/science/article/pii/S0957415813001153 audio slide summary]
Line 24: Line 25:
==Abstract==
==Abstract==
The recent development of [[open-source 3-D printers]] makes scaling of distributed additive-based manufacturing of high-value objects technically feasible and offers the potential for widespread proliferation of mechatronics education and participation. These self-replicating rapid prototypers ([[RepRap]]s) can manufacture approximately half of their own parts from sequential fused deposition of polymer feedstocks. RepRaps have been demonstrated for conventional prototyping and engineering, customizing scientific equipment, and appropriate technology-related manufacturing for sustainable development. However, in order for this technology to proliferate like 2-D electronic printers have, it must be economically viable for a typical household. This study reports on the [[life-cycle economic analysis]] (LCEA) of RepRap technology for an average US household. A new low-cost RepRap is described and the costs of materials and time to construct it are quantified. The economic costs of a selection of 20 open-source printable designs (representing less than 0.02% of those available), are typical of products that a household might purchase, are quantified for print time, energy, and filament consumption and compared to low and high Internet market prices for similar products without shipping costs. The results show that even making the extremely conservative assumption that the household would only use the printer to make the selected 20 products a year the avoided purchase cost savings would range from about $300 to $2000/year. Assuming the 25 h of necessary printing for the selected products is evenly distributed throughout the year these savings provide a simple payback time for the RepRap in 4 months to 2 years and provide an ROI between >200% and >40%. As both upgrades and the components that are most likely to wear out in the RepRap can be printed and thus the lifetime of the distributing manufacturing can be substantially increased the unavoidable conclusion from this study is that the RepRap is an economically attractive investment for the average US household already. It appears clear that as RepRaps improve in reliability, continue to decline in cost and both the number and assumed utility of open-source designs continues growing exponentially, open-source 3-D printers will become a mass-market mechatronic device.
The recent development of [[open-source 3-D printers]] makes scaling of distributed additive-based manufacturing of high-value objects technically feasible and offers the potential for widespread proliferation of mechatronics education and participation. These self-replicating rapid prototypers ([[RepRap]]s) can manufacture approximately half of their own parts from sequential fused deposition of polymer feedstocks. RepRaps have been demonstrated for conventional prototyping and engineering, customizing scientific equipment, and appropriate technology-related manufacturing for sustainable development. However, in order for this technology to proliferate like 2-D electronic printers have, it must be economically viable for a typical household. This study reports on the [[life-cycle economic analysis]] (LCEA) of RepRap technology for an average US household. A new low-cost RepRap is described and the costs of materials and time to construct it are quantified. The economic costs of a selection of 20 open-source printable designs (representing less than 0.02% of those available), are typical of products that a household might purchase, are quantified for print time, energy, and filament consumption and compared to low and high Internet market prices for similar products without shipping costs. The results show that even making the extremely conservative assumption that the household would only use the printer to make the selected 20 products a year the avoided purchase cost savings would range from about $300 to $2000/year. Assuming the 25 h of necessary printing for the selected products is evenly distributed throughout the year these savings provide a simple payback time for the RepRap in 4 months to 2 years and provide an ROI between >200% and >40%. As both upgrades and the components that are most likely to wear out in the RepRap can be printed and thus the lifetime of the distributing manufacturing can be substantially increased the unavoidable conclusion from this study is that the RepRap is an economically attractive investment for the average US household already. It appears clear that as RepRaps improve in reliability, continue to decline in cost and both the number and assumed utility of open-source designs continues growing exponentially, open-source 3-D printers will become a mass-market mechatronic device.
==See also==
* [[Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market]]
* [[Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers]]
* [[Quantifying the Value of Open Source Hardware Development]]
* [[Open-source, self-replicating 3-D printer factory for small-business manufacturing]]
* [[Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems]]
* [[Global value chains from a 3D printing perspective]]
* [[Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability]]
* [[Open-source 3-D Printing in Managing Humanitarian Innovation]]
* [[Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware]]
* [[Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S.]]
* [[Open-Source Three-Dimensional Printable Infant Clubfoot Brace]]
* [[Low-cost open source ultrasound-sensing based navigational support for visually impaired]]


==Press==
==Press==
* [http://www.mtu.edu/news/stories/2013/july/story93519.html Make It Yourself and Save—a Lot—with 3D Printers] - MTU News, [http://www.nanowerk.com/news2/gadget/newsid=31580.php Nanowerk], [http://www.cool3dprinting.com/p/4005381086/make-it-yourself-and-save-a-lot-with-3d-printers-michigan-tech-news Cool 3D printing], [http://www.sciencecodex.com/make_it_yourself_and_save_a_lot-116581 Science Codex], [http://www.pddnet.com/news/2013/07/make-it-yourself-and-save%E2%80%94-lot%E2%80%94-3d-printers Product Design and Development], [http://www.innovationtoronto.com/2013/07/make-it-yourself-and-save-a-lot-with-3d-printers/ Innovation Toronto], [http://www.spacemart.com/reports/Make_It_Yourself_and_Save_a_Lot_with_3D_Printers_999.html Space Mart]
* [http://www.mtu.edu/news/stories/2013/july/story93519.html Make It Yourself and Save—a Lot—with 3D Printers] - MTU News, [http://www.nanowerk.com/news2/gadget/newsid=31580.php Nanowerk], [http://www.cool3dprinting.com/p/4005381086/make-it-yourself-and-save-a-lot-with-3d-printers-michigan-tech-news Cool 3D printing], [http://www.sciencecodex.com/make_it_yourself_and_save_a_lot-116581 Science Codex], [http://www.pddnet.com/news/2013/07/make-it-yourself-and-save%E2%80%94-lot%E2%80%94-3d-printers Product Design and Development], [http://www.innovationtoronto.com/2013/07/make-it-yourself-and-save-a-lot-with-3d-printers/ Innovation Toronto], [http://www.spacemart.com/reports/Make_It_Yourself_and_Save_a_Lot_with_3D_Printers_999.html Space Mart]
* [http://whatsnext.blogs.cnn.com/2013/07/31/study-at-home-3-d-printing-could-save-consumers-thousands/ Study: At-home 3-D printing could save consumers 'thousands'] - CNN, [http://wreg.com/2013/07/31/study-at-home-3-d-printing-could-save-consumers-thousands/ CBS Channel 3 Memphis]
* [http://abcnews.go.com/Technology/printing-lab-printing-keychains-shower-heads-everyday-objects/story?id=19883704 Printing Keychains and Shower Heads: 3-D Printing Goes Beyond the Lab] - ABC News ,[http://news.yahoo.com/3-d-printing-going-mainstream-193952533--abc-news-tech.html Yahoo news]
* [http://www.popsci.com/gadgets/article/2013-08/3-d-printer-can-pay-itself-under-year A 3-D Printer Can Pay For Itself In Less Than A Year] - Popular Science
* [http://www.popsci.com/gadgets/article/2013-08/3-d-printer-can-pay-itself-under-year A 3-D Printer Can Pay For Itself In Less Than A Year] - Popular Science
* [http://tech.slashdot.org/story/13/08/01/0019259/study-finds-3d-printers-pay-for-themselves-in-under-a-year Study Finds 3D Printers Pay For Themselves In Under a Year] - Slashdot
* [http://tech.slashdot.org/story/13/08/01/0019259/study-finds-3d-printers-pay-for-themselves-in-under-a-year Study Finds 3D Printers Pay For Themselves In Under a Year] - Slashdot
Line 36: Line 53:
* [http://www.prototypetoday.com/viewvideo/3861/education/3d-printing-at-michigan-tech 3D printing at Michigan Tech]- Prototype Today
* [http://www.prototypetoday.com/viewvideo/3861/education/3d-printing-at-michigan-tech 3D printing at Michigan Tech]- Prototype Today
* [http://www.redorbit.com/news/technology/1112909837/cheap-and-easy-3d-printing-ready-for-prime-time-073013/ 3D Printers Can Save You Money] - Red Orbit, [http://beforeitsnews.com/science-and-technology/2013/07/3d-printers-can-save-you-money-2622954.html Before it is news]
* [http://www.redorbit.com/news/technology/1112909837/cheap-and-easy-3d-printing-ready-for-prime-time-073013/ 3D Printers Can Save You Money] - Red Orbit, [http://beforeitsnews.com/science-and-technology/2013/07/3d-printers-can-save-you-money-2622954.html Before it is news]
* [http://www.3ders.org/articles/20130730-mtu-study-3d-printers-may-soon-be-in-every-home.html MTU Study: 3D printers may soon be in every home] - 3Ders, [http://ewallstreeter.com/mtu-study-d-printers-may-soon-be-in-every-home-4303/ ewallstreeter], [http://diytech.tgdaily.com/story/maker/mtu-study-3d-printers-may-soon-be-in-eve/4f4a496d69685a4a2b41756550336a486a37427763773d3d TG Daily], [http://www.techinvestornews.com/Gadgets/Latest-Gadget-News/mtu-study-3d-printers-may-soon-be-in-every-home Tech Investor News], [http://www.3dprinterupdates.com/mtu-study-3d-printers-may-soon-be-in-every-home/ #d Printer Updates]
* [http://www.3ders.org/articles/20130730-mtu-study-3d-printers-may-soon-be-in-every-home.html MTU Study: 3D printers may soon be in every home] - 3Ders, [http://ewallstreeter.com/mtu-study-d-printers-may-soon-be-in-every-home-4303/ ewallstreeter], [http://diytech.tgdaily.com/story/maker/mtu-study-3d-printers-may-soon-be-in-eve/4f4a496d69685a4a2b41756550336a486a37427763773d3d TG Daily], [http://www.techinvestornews.com/Gadgets/Latest-Gadget-News/mtu-study-3d-printers-may-soon-be-in-every-home Tech Investor News], [http://www.3dprinterupdates.com/mtu-study-3d-printers-may-soon-be-in-every-home/ 3d Printer Updates]
* [http://citewire.com/research-open-source-3d-printing-economic-implications/ Research : Open-source 3D Printing Economic Implications] - CW
* [http://citewire.com/research-open-source-3d-printing-economic-implications/ Research : Open-source 3D Printing Economic Implications] - CW
* [http://www.dailytech.com/Study+Using+3D+Printers+for+Household+Products+Could+Save+Hundreds+of+Dollars/article33069.htm Study: Using 3D Printers for Household Products Could Save Hundreds of Dollars] - Daily Tech
* [http://www.dailytech.com/Study+Using+3D+Printers+for+Household+Products+Could+Save+Hundreds+of+Dollars/article33069.htm Study: Using 3D Printers for Household Products Could Save Hundreds of Dollars] - Daily Tech
Line 52: Line 69:
* [http://marginalrevolution.com/marginalrevolution/2013/07/the-household-economics-of-3-d-printers.html The household economics of 3-D printers] - Marginal Revolution
* [http://marginalrevolution.com/marginalrevolution/2013/07/the-household-economics-of-3-d-printers.html The household economics of 3-D printers] - Marginal Revolution
* [http://techcrunch.com/2013/07/31/study-finds-3d-printing-could-save-the-average-home-up-to-2000-a-year/ Study Finds 3D Printing Could Save The Average Home Up To $2,000 A Year] - Techcrunch
* [http://techcrunch.com/2013/07/31/study-finds-3d-printing-could-save-the-average-home-up-to-2000-a-year/ Study Finds 3D Printing Could Save The Average Home Up To $2,000 A Year] - Techcrunch
* [http://whatsnext.blogs.cnn.com/2013/07/31/study-at-home-3-d-printing-could-save-consumers-thousands/ Study: At-home 3-D printing could save consumers 'thousands'] - CNN, [http://wreg.com/2013/07/31/study-at-home-3-d-printing-could-save-consumers-thousands/ CBS Channel 3 Memphis]
* [http://www.computerworld.com/s/article/9241274/3D_printers_can_pay_for_themselves_in_under_a_year 3D printers can pay for themselves in under a year] - Computer World
* [http://www.computerworld.com/s/article/9241274/3D_printers_can_pay_for_themselves_in_under_a_year 3D printers can pay for themselves in under a year] - Computer World
* [http://www.upi.com/Science_News/Technology/2013/07/30/Study-Home-3D-printing-may-bring-make-it-dont-buy-it-to-families/UPI-21321375220708/ Study: Home 3D printing may bring 'make it, don't buy it' to families] - UPI
* [http://www.upi.com/Science_News/Technology/2013/07/30/Study-Home-3D-printing-may-bring-make-it-dont-buy-it-to-families/UPI-21321375220708/ Study: Home 3D printing may bring 'make it, don't buy it' to families] - UPI
Line 67: Line 83:
* [http://www.digitalmanufacturingreport.com/dmr/2013-08-01/manufacturers_to_cash_in_on_3d_printing_savings.html Manufacturers to Cash in on 3D Printing Savings] - Digital Manufacturing Report
* [http://www.digitalmanufacturingreport.com/dmr/2013-08-01/manufacturers_to_cash_in_on_3d_printing_savings.html Manufacturers to Cash in on 3D Printing Savings] - Digital Manufacturing Report
* [http://hothardware.com/News/Michigan-Tech-Researcher-Claims-Personal-3D-Printing-Could-Save-Consumers-a-Bundle-Annually/ Michigan Tech Researcher Claims Personal 3D Printing Could Save Consumers a Bundle Annually] - Hot Hardware
* [http://hothardware.com/News/Michigan-Tech-Researcher-Claims-Personal-3D-Printing-Could-Save-Consumers-a-Bundle-Annually/ Michigan Tech Researcher Claims Personal 3D Printing Could Save Consumers a Bundle Annually] - Hot Hardware
* [http://www.theskepticsguide.org/podcast/sgu/420 Podcast #420 - August 3rd, 2013] -The Skeptics’ Guide to the Universe
* [http://www.smartplanet.com/blog/bulletin/10-household-items-that-will-be-far-far-cheaper-with-3d-printing/25944 10 household items that will be far, far cheaper with 3D printing] Smart Planet
* [https://www.informationweek.com/hardware/peripherals/10-cool-things-3-d-printers-can-do/240159385 10 Cool Things 3-D Printers Can Do] - Information Week
* [http://3dprintingindustry.com/2013/08/08/michigan-tech-study-says-the-reprap-is-an-economically-attractive-investment-for-the-average-u-s-household-already/ Michigan Tech Study Says: “The RepRap is an economically attractive investment for the average U.S. household already”] - 3D Printing Industry
* [http://postnoon.com/2013/08/08/want-something-print-it/139072 Want something? Print it] - Post Noon
* [http://www.fastcoexist.com/1682798/print-these-20-things-you-dont-really-need-and-your-3-d-printer-pays-for-itself#1 Print These 20 Things You Don't Really Need And Your 3-D Printer Pays For Itself] - Co.Exist
* [http://www.tomsguide.com/us/how-3d-prinitng-save-money,news-17332.html How 3D Printing Will Save You Money] - Tom's Guide
* [http://www.3dprinter.net/3d-printers-offer-a-good-return-on-investment 3D printers offer a good return on investment] - 3D Printer
* [http://makezine.com/2013/08/16/maker-pro-newsletter-24/ A Michigan Tech University Researcher Predicts That a 3D Printer May Soon be in Every Home] - Maker Pro Newsletter
* [http://www.mlive.com/business/west-michigan/index.ssf/2013/08/sintercore_3d_printing_guns.html Click, print, fire: Grand Rapids startup hits accelerating 3D printed weapons market] - M Live,The Ann Arbor News
* [https://www.networkworld.com/community/blog/consumer-3d-printing-affordable-and-delicious Consumer 3D printing, affordable, great ROI, and delicious] - The Network World
* [http://www.foxbusiness.com/technology/2013/08/29/got-hankering-for-midnight-snack-try-printing-out-brownie/ Craving a Midnight Snack? Try Printing Out a Brownie] - Fox Business
* [http://realtytimes.com/consumeradvice/homeownersadvice1/item/26187-20130918-3-d-printing-comes-home 3-D Printing Comes Home] - Reality Times
* [http://prospect.org/article/pandoras-box Pandora's Box] - The American Prospect
* [http://hexus.net/tech/news/peripherals/58481-study-suggests-home-3d-printing-save-people-2k-pa/ Study suggests home 3D printing could save people up to $2k p.a.] - Hexus
* [http://www.marketspress.com/3d-printing-star-trek-style-3310/ericlinker.html 3D Printing Star Trek Style] - Markets Press
* [http://www.3ders.org/articles/20131024-disney-predicted-3d-printer-in-every-home-within-a-decade.html Disney sees 3D printer in every home within a decade]- 3Ders
* [http://graphicartsmag.com/articles/2013/11/wild-wonderful-world-3d-printing/ The wild & wonderful world of 3D printing] - Graphics Art Magazine
* [http://www.dailyfinance.com/2014/01/03/3d-printing-home-future-cheap-easy-ubiquitous/ Your Household Is Just a Few Years Away from a 3-D Printed Future] - Daily Finance
* [http://www.corpmagazine.com/features/cover-stories/itemid/10785/pageid/3/producing-a-revolution--3d-printing-opens-new-ave Producing A Revolution - 3D printing opens new avenues for inventions, innovation] - Corp Magazine
* [http://www.scholastic.com/aboutscholastic/files/LeonMcCarthy.pdf I printed my robot hand] - Junior Scholastic
* [http://reason.com/archives/2014/03/24/the-3d-economy/ The 3D Economy] - Reason
*[http://techgenmag.com/2014/11/08/formlabs-leaders-in-desktop-3d-printing/ Formlabs, leaders in desktop 3D printing] - TechGen Magazine
* [http://singularityhub.com/2015/08/05/making-ideas-tangible-how-3d-printers-will-transform-the-classroom/ Making Ideas Tangible: How 3D Printers Will Transform the Classroom] - Singularity Hub
* [http://thefuturescentre.org/trend-cards/123/distributed-manufacturing Distributed Manufacturing] - The Forum of the Future
===='''International'''====
{|style="border:1px solid #ffa508; background-color: #D0D0FFF; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" align="right" width="240px"
!<big>Impresoras 3D permitirían ahorrar dos mil dólares en los hogares, según estudio</big>
|-
|<center>{{#widget:YouTube|id=LAHtzTCWRAg}} </center>
|-
|}
Latin America and the Caribbean
* [http://www.ntn24.com/videos/cst-imprimir-en-3d-es-mas-o-102605 Impresoras 3D permitirían ahorrar dos mil dólares en los hogares, según estudio] - NTN24


Canada
Canada
Line 79: Line 131:
Poland
Poland
* [http://tech.money.pl/drukarka-3d-lepsza-niz-supermarket-0-1356119.html Drukarka 3D lepsza niż supermarket(3D Printer better than the supermarket) ] - Money.pl
* [http://tech.money.pl/drukarka-3d-lepsza-niz-supermarket-0-1356119.html Drukarka 3D lepsza niż supermarket(3D Printer better than the supermarket) ] - Money.pl
* [http://technowinki.onet.pl/gadzety/drukarka-3d-lepsza-niz-supermarket,1,5567920,artykul.html Drukarka 3D lepsza niż supermarket] - Onet.pl (largest Polish webportal)


Japan
Japan
Line 101: Line 154:
Norway
Norway
* [http://www.hardware.no/artikler/du-kan-spare-tusenvis-av-kroner-pa-3d-skriving/136020 Du kan spare tusenvis av kroner på 3D-skriving] - Hardware.no
* [http://www.hardware.no/artikler/du-kan-spare-tusenvis-av-kroner-pa-3d-skriving/136020 Du kan spare tusenvis av kroner på 3D-skriving] - Hardware.no
France
* [http://www.latribune.fr/technos-medias/informatique/20130805trib000779111/imprimantes-3d-rentables-en-moins-d-un-an.html Imprimantes 3D : rentables en moins d'un an] La Tribune ( French financial newspaper circulation of ~78,000)
* [http://www.monunivers3d.com/1530/ Etude : une imprimante 3D serait rentabilisée dès la première année] - Mon Universe 3D
Costa Rica
* [http://www.nacion.com/tecnologia/gadgets/Impresoras-pueden-economizar_0_1360664038.html Impresoras 3D le pueden economizar más de $1.000] La Nacion


{{MOST-RepRap}}
{{MOST-RepRap}}

Revision as of 11:13, 31 August 2019

Michigan Tech's Open Sustainability Technology LabContact Dr. Joshua Pearce at Free Appropriate Sustainable Technology.
MOST · Projects & Publications · Methods · Lit. reviews · People · Sponsors · News · Updates on Twitter · YouTube
Read more...
This page is part of an international project to use RepRap 3-D printing to make OSAT for sustainable developmentLearn more
Research: Open source 3-D printing of OSAT · RecycleBot · LCA of home recycling · Green Distributed Recycling · Ethical Filament · LCA of distributed manufacturing · RepRap LCA Energy and CO2 · Solar-powered RepRaps · solar powered recyclebot · Feasibility hub · Mechanical testing · RepRap printing protocol: MOST · Lessons learned · MOST RepRap Build · MOST Prusa Build · MOST HS RepRap build · RepRap Print Server
Make me: Want to build a MOST RepRap? · Delta Build Overview:MOST · Athena Build Overview · MOST metal 3-D printer · Humanitarian Crisis Response 3-D Printer
Read more...
Economic Advantage to Making Your Own Stuff with 3D Printing
Error in widget YouTube: Unable to load template 'wiki:YouTube'

Source

B.T. Wittbrodt, A.G. Glover, J. Laureto, G.C. Anzalone, D. Oppliger, J.L. Irwin, J.M. Pearce (2013), Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers, Mechatronics, 23 (2013), pp. 713-726. http://dx.doi.org/10.1016/j.mechatronics.2013.06.002

Highlights

3dprinted household.JPG
  • Open-source 3-D printers makes distributed manufacturing technically feasible.
  • Self-replicating rapid prototypers (RepRaps) can manufacture half of their own parts.
  • Life-cycle economic analysis of RepRap technology for US household provided.
  • Open-source 3-D printers recover material costs in less than 1 year, >200% ROI
  • Open-source designs growing exponentially predicts distributed manufacturing scaling.

Abstract

The recent development of open-source 3-D printers makes scaling of distributed additive-based manufacturing of high-value objects technically feasible and offers the potential for widespread proliferation of mechatronics education and participation. These self-replicating rapid prototypers (RepRaps) can manufacture approximately half of their own parts from sequential fused deposition of polymer feedstocks. RepRaps have been demonstrated for conventional prototyping and engineering, customizing scientific equipment, and appropriate technology-related manufacturing for sustainable development. However, in order for this technology to proliferate like 2-D electronic printers have, it must be economically viable for a typical household. This study reports on the life-cycle economic analysis (LCEA) of RepRap technology for an average US household. A new low-cost RepRap is described and the costs of materials and time to construct it are quantified. The economic costs of a selection of 20 open-source printable designs (representing less than 0.02% of those available), are typical of products that a household might purchase, are quantified for print time, energy, and filament consumption and compared to low and high Internet market prices for similar products without shipping costs. The results show that even making the extremely conservative assumption that the household would only use the printer to make the selected 20 products a year the avoided purchase cost savings would range from about $300 to $2000/year. Assuming the 25 h of necessary printing for the selected products is evenly distributed throughout the year these savings provide a simple payback time for the RepRap in 4 months to 2 years and provide an ROI between >200% and >40%. As both upgrades and the components that are most likely to wear out in the RepRap can be printed and thus the lifetime of the distributing manufacturing can be substantially increased the unavoidable conclusion from this study is that the RepRap is an economically attractive investment for the average US household already. It appears clear that as RepRaps improve in reliability, continue to decline in cost and both the number and assumed utility of open-source designs continues growing exponentially, open-source 3-D printers will become a mass-market mechatronic device.

See also

Press

International

Impresoras 3D permitirían ahorrar dos mil dólares en los hogares, según estudio
Error in widget YouTube: Unable to load template 'wiki:YouTube'

Latin America and the Caribbean

Canada

Spain

Poland

Japan

Hungary

Austria

Netherlands

Russia

UK

Norway

France

Costa Rica

This page is part of an international project to use RepRap 3-D printing to make OSAT for sustainable developmentLearn more
Research: Open source 3-D printing of OSAT · RecycleBot · LCA of home recycling · Green Distributed Recycling · Ethical Filament · LCA of distributed manufacturing · RepRap LCA Energy and CO2 · Solar-powered RepRaps · solar powered recyclebot · Feasibility hub · Mechanical testing · RepRap printing protocol: MOST · Lessons learned · MOST RepRap Build · MOST Prusa Build · MOST HS RepRap build · RepRap Print Server
Make me: Want to build a MOST RepRap? · Delta Build Overview:MOST · Athena Build Overview · MOST metal 3-D printer · Humanitarian Crisis Response 3-D Printer
Read more...
Retrieved from "https://www.appropedia.org/w/index.php?title=Life-cycle_economic_analysis_of_distributed_manufacturing_with_open-source_3-D_printers&oldid=389577"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.