No edit summary
No edit summary
Line 4: Line 4:


Currently, I am investigating the potential to design a plastic/paper composite extruder which would facilitate the production of feedstock for the Kingston Hot Press.
Currently, I am investigating the potential to design a plastic/paper composite extruder which would facilitate the production of feedstock for the Kingston Hot Press.
===Introduction===
===Problem Definition and Scope===
===Client===
===Goals===
===Constraints===
===Prior Art===
===Theory and Methodology===
===Design Alternatives===
===Final Design and Analysis===
===Cost Analysis===
===Conclusions and Recommendations===
===Future Work===
===References===

Revision as of 00:42, 4 April 2010

Template:425inprogress

Check out the project on wasteforlife.org Hot Press Discussion Page

Currently, I am investigating the potential to design a plastic/paper composite extruder which would facilitate the production of feedstock for the Kingston Hot Press.

Introduction

Problem Definition and Scope

Client

Goals

Constraints

Prior Art

Theory and Methodology

Design Alternatives

Final Design and Analysis

Cost Analysis

Conclusions and Recommendations

Future Work

References

Cookies help us deliver our services. By using our services, you agree to our use of cookies.