Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Improved PET Bottle Stripper"

From Appropedia
Jump to: navigation, search
 
Line 80: Line 80:
  
 
* ~252grams plastic filament - ~$7.32USD @ $29USD/kg
 
* ~252grams plastic filament - ~$7.32USD @ $29USD/kg
 +
* $1.89 in hardware from McMaster.com
 +
* 50 pack of utility blades $9.58 on Amazon
 +
* Total cost ~$18.79
 
* No commercial equivalent can be found (other self made solutions, but no detailed drawings found)
 
* No commercial equivalent can be found (other self made solutions, but no detailed drawings found)
 
* Savings is in time from self-spooling action
 
* Savings is in time from self-spooling action

Latest revision as of 10:27, 8 December 2015

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.


Improved PET Bottle Stripper[edit]

Project developed by Klbarie (talk) 20:25, 6 December 2015 (PST)

Status
This OSAT has been modeled.
This OSAT has been prototyped.

You can help Appropedia by contributing to the next step in this OSAT's status.

Abstract[edit]

In many countries, disposing of PET bottles has caused a major problem. Recycling these bottles proves a difficult challenge. This Bottle Stripper turns PET bottles into long strips that can be used to weave baskets, use as fishing line, use as a type of rope, or possibly even as 3D printer filament. This design spools the strips automatically as it operates.

Assembled PET Bottle Stripper
Completed Assembly  
Printed Assembly  
PET Bottle Stripper Parts
Bottle Stripper  
Mounting Base  
Razor Clamp  
Spool Clamp  
Spool Handle Part 1  
Spool Handle Part 2  
Spool Rod  
Spool Stand  

Bill of Materials[edit]

  1. 1 - File:BottleStripper v2.stl
  2. 1 - File:Mounting Base v2.stl
  3. 1 - File:Razor Clamp v2.stl
  4. 2 - File:Spool Clamp v2.stl
  5. 1 - File:Spool Handle 1 v2.stl
  6. 1 - File:Spool Handle 2 v2.stl
  7. 1 - File:Spool Rod v2.stl
  8. 2 - File:Spool Stand v2.stl
  9. 6 - M3X10mm Bolts
  10. 8 - M3X16mm Bolts
  11. 14 - M3 Nuts
  12. 10-20 - M3 Washers
  13. Many - Standard Utility Blades

Tools needed for fabrication of the OSAT[edit]

  • Athena Delta RepRap or equivalent 3D printer
  • PLA or ABS plastic filament
  • .STL Slicer program (Cura/Slic3r/etc.)
  • Appropriate driver for chosen bolts

Skills and Knowledge Necessary to Make the OSAT[edit]

  • Proficient knowledge in 3D printer operation
  • Basic mechanical assembly skills

Technical Specifications and Assembly Instructions[edit]

  1. Download files listed above
  2. Print specified number of parts
  3. Clean parts as needed with a razor blade
  4. Assemble parts as shown in the Completed Assembly photo above.
    1. Use 10mm bolts to clamp razor blade and spool rod
    2. Use 16mm bolts to secure parts to base (add washers as needed if bolts stick too far past bottom of the base)


Common Problems and Solutions[edit]

  • Cutting slots may need trimming before use
  • Bottles tend to begin to cut into plastic stripper over time. May need to replace with metal substitute.

Cost savings[edit]

  • ~252grams plastic filament - ~$7.32USD @ $29USD/kg
  • $1.89 in hardware from McMaster.com
  • 50 pack of utility blades $9.58 on Amazon
  • Total cost ~$18.79
  • No commercial equivalent can be found (other self made solutions, but no detailed drawings found)
  • Savings is in time from self-spooling action

Additional Files[edit]

Below is are the .SCAD files used to create this device.


References[edit]

  1. Utility Knife Blade Inventor model. Converted into .STL for use in OpenSCAD: https://grabcad.com/library/standard-utility-knife-blade
  2. http://www.utsumi.com.br/pet/English/filetador/index.html
  3. http://www.livedebris.org/Photos/Art%20photos/Tutorials/bottle%20cutter%20tutorial.pdf
  4. http://www.appropedia.org/PET_Bottle_Shredder