The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Introduction

The Hexayurt is a design pattern for making simple six sided shelters which are like the Mongolian Yurt from a variety of common industrial materials. Two basic families of Hexayurts exist - those made from panel materials, and those made from beams. The design is simple enough that construction close to or even in disaster areas seems likely. This creates the possibility of large scale shelter construction using materials common in the industrial supply chain. The Hexayurt has been field tested by the US Department of Defense, and the American and Netherlands Red Cross have show strong interest in the design.

This research examines a hexayurt with a metal frame for use in hurricane risk areas. It builds on existing work at Technical University of Eindhoven on a metal frame for a hurricane resistant building.

The frame hexayurt shape is interesting to this research because it allows for a building which is entirely made of triangles, possibly giving very good strength. Additionally there is no need for additional tension elements to hold the building in shape, and standard steel stock can be used efficiently with little need for cutting or welding.

The geometry of the frame hexayurt is simple. It comprises 24 long and 6 short tubes arranged in a shape similar to the top part of an icosahedron but with six sides rather than five. The six short pipes form the the tension ring of the building, and their length is chosen such that the walls are vertical. (see diagram)

Aim

This research should give all of the technical information required for technical decision-makers in NGOs, governments and industry to decide whether or not a hexayurt of this design is appropriate for their climate and application. This includes three phases.

  1. Desk analysis of the frame hexayurt
  2. Design and prototyping of a frame hexayurt, including materials selection
  3. If resources allow, physical testing of a prototype to prove the desk analysis

Technical Description

One probable configuration for the hurricane resistant frame hexayurt is to use square steel stock, which typically comes in 6 meter lengths. These pieces would be cut in two for three meter long poles, and approximately 2.6 meter short poles, giving a shelter of approximately 24 square meters.

One possible connection mechanism for the poles is to use small steel brackets and bolts. The brackets would be perhaps 20 cm of steel bar, with holes drilled in each end, bent to an angle. Each pole would be drilled with a hole perhaps 10 cm from the end. The steel brackets would each connect two poles. There would be four brackets, each for a different connection on the structure. Bolts would hold the poles to the brackets, with each bolt going through one bracket, then through the pole, then through the other bracket. (See diagram)

There may be other, better connection systems available, but this approach is simple and may be strong and very cheap to manufacture. If a better system can be found, the analysis should be conducted on that system as well.

Research Agenda

There are six primary areas of analysis needed for this design. They are:

  1. Design of an anchoring system to secure the frame hexayurt to the ground
  2. Wind load analysis
  3. Snow load analysis
  4. Thermal analysis
  5. Analysis of water handling, including designing some kind of covering from the structure which makes use of the materials which are likely to be available in a crisis, and any corrosion issues that may occur on the frame itself.
  6. Costing and materials logistics, including quantities of raw materials available in a crisis. For guidance, 10000 units would be used in a small deployment.

Structural Calculations

Building Physics

Building Technology

More Information

Contact Information

Cookies help us deliver our services. By using our services, you agree to our use of cookies.