Line 17: | Line 17: | ||
* 1 x 3mm nut** | * 1 x 3mm nut** | ||
NUT & BOLT DIMENSIONS MAY CHANGE WITH CUSTOMIZATION OF PRINT | |||
== Tools needed for fabrication of the OSAT== | == Tools needed for fabrication of the OSAT== |
Revision as of 16:01, 6 December 2018
Hemostats
Project developed by User:Patrick Gilland
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
- Hemostats are a medical alternative to clamps. They are especially useful when the user only has one hand available or access to something from one side. This fully customizable 3-D printed option makes hemostats available to doctors in remote locations at a low cost.
- Picture of completed print using your printer
Bill of Materials
- 2 x Printed Hemostat
- 1 x 3mm by 10mm long**
- 1 x 3mm nut**
NUT & BOLT DIMENSIONS MAY CHANGE WITH CUSTOMIZATION OF PRINT
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
- Phillips head screw driver
- 5.5 mm wrench
TOOL REQUIREMENTS MAY VARY BASED ON NUT & BOLT SELECTION