(Created page with "{{MOST}} =Prototype Gigabot X printer user guide= This guide will walk through the steps to successfully operate the prototype Gigabot X from Re3D. ===Printable Materials==...") |
|||
Line 6: | Line 6: | ||
===Printable Materials=== | ===Printable Materials=== | ||
So far, the Gigabot X has been tested and proven to work with the following pellets: | So far, the Gigabot X has been tested and proven to work with the following pellets: | ||
Virgin PLA, with MasterBatch Mixing | Virgin PLA, with MasterBatch Mixing | ||
Recycled PLA from failed 3D Prints | Recycled PLA from failed 3D Prints | ||
Recycled ABS | Recycled ABS | ||
Recycled PET | Recycled PET | ||
Recycled Polycarbonate | Recycled Polycarbonate | ||
Recycled ASA | Recycled ASA | ||
Recycled Polypropylene | Recycled Polypropylene | ||
Revision as of 17:21, 1 November 2018
Prototype Gigabot X printer user guide
This guide will walk through the steps to successfully operate the prototype Gigabot X from Re3D.
Printable Materials
So far, the Gigabot X has been tested and proven to work with the following pellets:
Virgin PLA, with MasterBatch Mixing
Recycled PLA from failed 3D Prints
Recycled ABS
Recycled PET
Recycled Polycarbonate
Recycled ASA
Recycled Polypropylene
How to use
Power and Lights
Interface
Slicing
Purging Materials
New Material Testing
Tips and Tricks