m (Text replacement - "{{OpenKnowHowManifest" to "{{Device")
Line 33: Line 33:


==Abstract==
==Abstract==
# This project is made for people who wish to pick unreachable fruit from trees. Forcing fruit out of a tree causes it to bruise and spoil quicker than that that is picked from with care. The fruit picker is printed in two parts. It uses a regular 2 liter soda bottle along with five screws to assemble. It does also require an old broom handle or piece of pipe to use as a handle. This is a cheaper alternative to what is already on the market and is more universal in the handles it can use
This project is made for people who wish to pick unreachable fruit from trees. Forcing fruit out of a tree causes it to bruise and spoil quicker than that that is picked from with care. The fruit picker is printed in two parts. It uses a regular 2 liter soda bottle along with five screws to assemble. It does also require an old broom handle or piece of pipe to use as a handle. This is a cheaper alternative to what is already on the market and is more universal in the handles it can use.
# Link to file: http://www.thingiverse.com/thing:1182261
# Note to creator: thingiverse link links to a hammer not fruit picker.


== Bill of Materials==
== Bill of Materials==

Revision as of 00:48, 17 September 2020

FA info icon.svg Angle down icon.svg Device data
Manufacturing files https://www.thingiverse.com/thing:1182261
Hardware license CERN-OHL-S
Certifications Start OSHWA certification

Fruit Picker

Created by Josh Lawson Template:Statusboxtop Template:Status-design

Template:Boxbottom

Abstract

This project is made for people who wish to pick unreachable fruit from trees. Forcing fruit out of a tree causes it to bruise and spoil quicker than that that is picked from with care. The fruit picker is printed in two parts. It uses a regular 2 liter soda bottle along with five screws to assemble. It does also require an old broom handle or piece of pipe to use as a handle. This is a cheaper alternative to what is already on the market and is more universal in the handles it can use.

Bill of Materials

CAD Files

Extra Parts

  • 1/8" x 3/8" sheet metal screw (x2)
  • 1/4" x 1-1/4" machine screw (x3)

Tools needed for fabrication

  1. 3D printer
  2. Equivalent screw drivers to match screws used

Skills and Knowledge Necessary to Make the OSAT

  • There is no special skills needed to make this tool.

Technical Specifications

  1. If any changes to the design want to be done, open the SCAD file and adjust the parameters.
  2. Slicing instructions:
    1. Fill % = 50
    2. Speed = 70 mm/sec
    3. Layer Height = .15 mm
    4. No support Needed
  3. Print time with above settings will be about 3 hours per part

Assembly Instructions

  1. Cut bottom off of 2 liter bottle at desired location
  2. Screw sheet metal screws through bottle so they line up with holes in poth 3D printed parts
  3. Evenly screw last three screws to fix to handle

Cost savings

Cost of creating this hammer

  *Filament needed: 82 grams @ $22.98/kg = $1.88
  *Hardware needed: 5 screws @ $1.50
  *At a total cost of $3.38

Commercial Equivalents

  *Equivalent: $10.69

Gallery

References

Cookies help us deliver our services. By using our services, you agree to our use of cookies.