Instruction for Page
- When adding 3D printing settings, please provide the ini file/printer type used. This is to allow easy importation of the print settings for users.
- Add images if necessary
- Add additional tips when using a given filament(so new users make less mistakes/save filiment)
Operation & Procedure
PETG for Pringle's Delta/Franklin
- Cura Settings
-
Fig 1: Basic Cura Settings Example
-
Fig 1b: Advanced Cura Settings Example
-
Fig 1c: Expert Cura Settings Example
- Tips
- Having an fan on the print improves print quality
- Heated bed is not necessary
- Extra glue is needed for proper bed adhesion
- Filament tends to fall out of extruder as the print temp is reached, so extrude some(in Franklin works) before printing.
- Having high extrusion for the first 1-2 layers improves bed adhesion
- Increasing skirt length to 2-3 circles is beneficial for bed adhesion and a good first layer
- Secondary Resources
See also https://www.matterhackers.com/news/how-to-succeed-when-printing-with-petg-filament
PLA
ABS
PP
- Gizmo Dorks sells great quality PP filament(1.75mm has been tested)