Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers: Difference between revisions

Revision as of 20:58, 15 February 2017

Economic Advantage to Making Your Own Stuff with 3D Printing
Error in widget YouTube: Unable to load template 'wiki:YouTube'

Source

Emily E. Petersen and Joshua Pearce. Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers. Technologies 2017, 5(1), 7; doi:10.3390/technologies5010007 open access
- Supplimentary: http://www.mdpi.com/2227-7080/5/1/7/s1
- Lulzbot Mini - source code: http://download.lulzbot.com/Mini/

Abstract

Through reduced 3-D printer cost, increased usability, and greater material selection, additive manufacturing has transitioned from business manufacturing to the average prosumer. This study serves as a representative model for the potential future of 3-D printing in the average American household by employing a printer operator who was relatively unfamiliar with 3-D printing and the 3-D design files of common items normally purchased by the average consumer. Twenty-six items were printed in thermoplastic and a cost analysis was performed through comparison to comparable, commercially available products at a low and high price range. When compared to the low-cost items, investment in a 3-D printer represented a return of investment of over 100% in five years. The simple payback time for the high-cost comparison was less than 6 months, and produced a 986% return. Thus, fully-assembled commercial open source 3-D printers can be highly profitable investments for American consumers. Finally, as a preliminary gauge of the effect that widespread prosumer use of 3-D printing might have on the economy, savings were calculated based on the items’ download rates from open repositories. Results indicate that printing these selected items have already saved prosumers over $4 million by substituting for purchases.

Keywords

distributed manufacturing; additive manufacturing; 3-D printing; consumer; economics; open-source

In the News

Just Press Print: 3-D Printing At Home Saves Cash - MTU News , Eureka Alert, Science Daily, Xania News, Science Magazine
Using a 3D printer to print your household items could save you $12,000 - Digital Trends
Researchers calculate major cost savings of 3-D printing household items - Phys.org , HiTech Days, ECN Magazine, Science Bulletin
3D-printed household items mean major cost savings - Electronics Specifier
3D printing at home will save you money down the line, says new study from MTU - 3Ders, Longroom, STL finder
License to Print Money at Home?- Engineering360 IEEE GlobalSpec
Report Indicates That 3D Printing Can Save Consumers Up To $4 Million-One Angry Gamer
How 3-D printing at home saves big bucks -- ScienceDaily- DailyMe, Eurasia Review, Last Min Christmas
MTU Study: 3-D Home Printer To Produce 1000 Percent Return Over 5 Years-MI Tech News
New study shows how 3-D printing at home saves big bucks - Domain B
Like Making Money: Study Shows How 3-D Printing at Home Saves Big Bucks - Ideas, Inventions And Innovations
Low-Cost 3D-Device Prints Your Household Items - News Island Crisis
How to make money with a 3D printer: a conversation with Professor Joshua Pearce - 3D Printing Industry
3D-printing household objects could be top money-saving tip - E&T

International

Tuore tutkimus: Tällä tonnin investoinnilla säästät jopa 11 000 € viidessä vuodessa -Tekniikka & Talous (Finland)
3D打印用于日常究竟能多省钱？半年回本，5年回报10倍- Weiot (China)
MTU最新研究：在家3D打印除了省钱还能获得1000％的的高回报 - 24 Maker (China)
MTU的新研究揭晓在家3D打印可以为您节省金钱 Wengu.Aniu.TC (China)
MTU的新研究揭晓在家3D打印可以为您节省金钱 3DHoo (China)
3D打印用于日常究竟能多省钱？半年回本，5年回报10倍！ Nanjixiong (China)
Вокруг света с 3Dtoday: новый гидрогель для костной биопечати, итоги первого конкурса Hyperloop и исследование экономии от бытовых 3D-принтеров -3D Today (Russia)
3D-printer: met een rendement van bijna 1000% over 5 jaar een uitstekende investering Scientias.nl (Dutch)
Wissenschaftliche Studie besagt, ein privater 3D-Drucker kann bis zu 1000 Prozent Rendite abwerfen - 3d-grenzenlos.de (German)
Make a 100 percent or more return on your money with a low-cost open-source 3D printer- Innovation Toronto (Canada)
[1]

@@ Line 32: / Line 32: @@
 == In the News ==
 * [http://www.mtu.edu/news/stories/2017/february/just-press-print-3-d-printing-home-saves-cash.html Just Press Print: 3-D Printing At Home Saves Cash] - MTU News , [https://www.eurekalert.org/pub_releases/2017-02/mtu-jpp021417.php Eureka Alert], [https://www.sciencedaily.com/releases/2017/02/170214130509.htm Science Daily], [https://www.xanianews.com/news/just-press-print-how-3-d-printing-at-home-saves-big-bucks?uid=651706 Xania News], [https://scienmag.com/just-press-print-new-study-shows-how-3-d-printing-at-home-saves-big-bucks/ Science Magazine]
+* [http://www.digitaltrends.com/cool-tech/3d-printing-home-savings/ Using a 3D printer to print your household items could save you $12,000] - Digital Trends
 * [https://phys.org/news/2017-02-major-d-household-items.html Researchers calculate major cost savings of 3-D printing household items ] - Phys.org , [http://www.hitechdays.com/browser/169958/ HiTech Days], [https://www.ecnmag.com/news/2017/02/researchers-calculate-major-cost-savings-3-d-printing-household-items  ECN Magazine], [http://sciencebulletin.org/archives/10425.html Science Bulletin]
 * [http://production.electronicspecifier.com/3d-printing/3d-printing-household-items-mean-major-cost-savings 3D-printed household items mean major cost savings ] - Electronics Specifier
@@ Line 44: / Line 45: @@
 * [https://3dprintingindustry.com/news/make-money-3d-printer-conversation-professor-joshua-pearce-105824/ How to make money with a 3D printer: a conversation with Professor Joshua Pearce ] - 3D Printing Industry
 * [https://eandt.theiet.org/content/articles/2017/02/3d-printing-household-objects-could-be-top-money-saving-tip/ 3D-printing household objects could be top money-saving tip] - E&T
 ===International===
 *[http://www.tekniikkatalous.fi/tekniikka/tuore-tutkimus-talla-tonnin-investoinnilla-saastat-jopa-11-000-viidessa-vuodessa-6624849 Tuore tutkimus: Tällä tonnin investoinnilla säästät jopa 11 000 € viidessä vuodessa ] -Tekniikka & Talous (Finland)
@@ Line 49: / Line 51: @@
 * [http://24maker.com/thread-18468-1-1.html MTU最新研究：在家3D打印除了省钱还能获得1000％的的高回报] - 24 Maker (China)
 * [http://wengu.aniu.tv/news_10501233.html MTU的新研究揭晓在家3D打印可以为您节省金钱] Wengu.Aniu.TC (China)
+* [http://www.3dhoo.com/news/guowai/27890.html MTU的新研究揭晓在家3D打印可以为您节省金钱] 3DHoo (China)
+* [http://www.nanjixiong.com/thread-98439-1-1.html 3D打印用于日常究竟能多省钱？半年回本，5年回报10倍！] Nanjixiong (China)
 * [http://3dtoday.ru/blogs/news3dtoday/around-the-world-with-3dtoday-a-new-hydrogel-for-bioprinting-of-bone-t1/ Вокруг света с 3Dtoday: новый гидрогель для костной биопечати, итоги первого конкурса Hyperloop и исследование экономии от бытовых 3D-принтеров ] -3D Today (Russia)
 * [https://www.scientias.nl/3d-printer-rendement-bijna-1000-5-jaar-uitstekende-investering/ 3D-printer: met een rendement van bijna 1000% over 5 jaar een uitstekende investering ] Scientias.nl (Dutch)