J.M.Pearce (talk | contribs) m (→In the News) |
J.M.Pearce (talk | contribs) m (→In the News) |
||
Line 35: | Line 35: | ||
* [http://production.electronicspecifier.com/3d-printing/3d-printing-household-items-mean-major-cost-savings 3D-printed household items mean major cost savings ] - Electronics Specifier | * [http://production.electronicspecifier.com/3d-printing/3d-printing-household-items-mean-major-cost-savings 3D-printed household items mean major cost savings ] - Electronics Specifier | ||
* [http://www.3ders.org/articles/20170214-3d-printing-at-home-will-save-you-money-down-the-line-says-new-study-from-mtu.html 3D printing at home will save you money down the line, says new study from MTU ] - 3Ders, [https://www.longroom.com/discussion/326090/3d-printing-at-home-will-save-you-money-down-the-line-says-new-study-from-mtu Longroom] | * [http://www.3ders.org/articles/20170214-3d-printing-at-home-will-save-you-money-down-the-line-says-new-study-from-mtu.html 3D printing at home will save you money down the line, says new study from MTU ] - 3Ders, [https://www.longroom.com/discussion/326090/3d-printing-at-home-will-save-you-money-down-the-line-says-new-study-from-mtu Longroom] | ||
*[http://www.oneangrygamer.net/2017/02/report-indicates-that-3d-printing-can-save-consumers-up-to-4-million/23959/ Report Indicates That 3D Printing Can Save Consumers Up To $4 Million]-One Angry Gamer | |||
*[http://dailyme.com/story/2017021400003157 How 3-D printing at home saves big bucks -- ScienceDaily]- DailyMe,[http://www.lastminutechristmas.com/last-minute-christmas/40-newsbriefs/466815-3-d-printing-at-home-saves-big-bucks.html last min Christmas] | |||
* [https://mitechnews.com/new-products-contracts/mtu-study-3-d-home-printer-produce-1000-percent-return-5-years/ MTU Study: 3-D Home Printer To Produce 1000 Percent Return Over 5 Years]-MI Tech News | |||
===International=== | |||
*[http://www.tekniikkatalous.fi/tekniikka/tuore-tutkimus-talla-tonnin-investoinnilla-saastat-jopa-11-000-viidessa-vuodessa-6624849 Tuore tutkimus: Tällä tonnin investoinnilla säästät jopa 11 000 € viidessä vuodessa ] -Tekniikka & Talous (Finland) | |||
* [http://www.weiot.net/article-31676.html 3D打印用于日常究竟能多省钱?半年回本,5年回报10倍]- Weiot. China | |||
* [http://3dtoday.ru/blogs/news3dtoday/around-the-world-with-3dtoday-a-new-hydrogel-for-bioprinting-of-bone-t1/ | |||
Вокруг света с 3Dtoday: новый гидрогель для костной биопечати, итоги первого конкурса Hyperloop и исследование экономии от бытовых 3D-принтеров] -3D Today Russia | |||
[[Category:3D printing]] | [[Category:3D printing]] | ||
[[Category:Research]] | [[Category:Research]] | ||
[[Category:DIY culture]] | [[Category:DIY culture]] | ||
[[Category:Distributed manufacturing]] | [[Category:Distributed manufacturing]] |
Revision as of 12:36, 15 February 2017
Economic Advantage to Making Your Own Stuff with 3D Printing |
---|
Error in widget YouTube: Unable to load template 'wiki:YouTube' |
Source
- Emily E. Petersen and Joshua Pearce. Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers. Technologies 2017, 5(1), 7; doi:10.3390/technologies5010007 open access
- Supplimentary: http://www.mdpi.com/2227-7080/5/1/7/s1
- Lulzbot Mini - source code: http://download.lulzbot.com/Mini/
Abstract
Through reduced 3-D printer cost, increased usability, and greater material selection, additive manufacturing has transitioned from business manufacturing to the average prosumer. This study serves as a representative model for the potential future of 3-D printing in the average American household by employing a printer operator who was relatively unfamiliar with 3-D printing and the 3-D design files of common items normally purchased by the average consumer. Twenty-six items were printed in thermoplastic and a cost analysis was performed through comparison to comparable, commercially available products at a low and high price range. When compared to the low-cost items, investment in a 3-D printer represented a return of investment of over 100% in five years. The simple payback time for the high-cost comparison was less than 6 months, and produced a 986% return. Thus, fully-assembled commercial open source 3-D printers can be highly profitable investments for American consumers. Finally, as a preliminary gauge of the effect that widespread prosumer use of 3-D printing might have on the economy, savings were calculated based on the items’ download rates from open repositories. Results indicate that printing these selected items have already saved prosumers over $4 million by substituting for purchases.
Keywords
distributed manufacturing; additive manufacturing; 3-D printing; consumer; economics; open-source
See also
- Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers
- Quantifying the Value of Open Source Hardware Development
- Open-source, self-replicating 3-D printer factory for small-business manufacturing
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
- Global value chains from a 3D printing perspective
In the News
- Just Press Print: 3-D Printing At Home Saves Cash - MTU News , Eureka Alert, Science Daily, Xania News
- Researchers calculate major cost savings of 3-D printing household items - Phys.org , HiTech Days
- 3D-printed household items mean major cost savings - Electronics Specifier
- 3D printing at home will save you money down the line, says new study from MTU - 3Ders, Longroom
- Report Indicates That 3D Printing Can Save Consumers Up To $4 Million-One Angry Gamer
- How 3-D printing at home saves big bucks -- ScienceDaily- DailyMe,last min Christmas
- MTU Study: 3-D Home Printer To Produce 1000 Percent Return Over 5 Years-MI Tech News
International
- Tuore tutkimus: Tällä tonnin investoinnilla säästät jopa 11 000 € viidessä vuodessa -Tekniikka & Talous (Finland)
- 3D打印用于日常究竟能多省钱?半年回本,5年回报10倍- Weiot. China
- [http://3dtoday.ru/blogs/news3dtoday/around-the-world-with-3dtoday-a-new-hydrogel-for-bioprinting-of-bone-t1/
Вокруг света с 3Dtoday: новый гидрогель для костной биопечати, итоги первого конкурса Hyperloop и исследование экономии от бытовых 3D-принтеров] -3D Today Russia