Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "ENGR242 Customizer"

From Appropedia
Jump to: navigation, search
(Gallery)
(Gallery)
Line 16: Line 16:
 
<gallery caption="Customized Projects">
 
<gallery caption="Customized Projects">
 
Image: Rocket2.png| [https://www.thingiverse.com/thing:3908995]
 
Image: Rocket2.png| [https://www.thingiverse.com/thing:3908995]
 +
Image: cellcapsV2_3.png| [https://www.thingiverse.com/thing:3910532]
 
Image: guitar_picscad.png| [https://www.thingiverse.com/thing:3907353]
 
Image: guitar_picscad.png| [https://www.thingiverse.com/thing:3907353]
 
Image: Keychain.png|[https://www.thingiverse.com/thing:3907141]
 
Image: Keychain.png|[https://www.thingiverse.com/thing:3907141]

Revision as of 20:04, 11 October 2019

Hotend.JPG This page is part of a Principia course ENGR242: 3-D Printing Technology

Please leave comments using the discussion tab. The course runs in the Spring semester. It is not open edit.



This project is to design a customizable OpenSCAD script.

  1. Using OpenSCAD either design an original customizable object, or adapt an existing scad file you find online to work with the open source customizer.
  2. Make it printable (you do not need to print it) for your RepRap
  3. Post your SCAD and STL of your design on Thingiverse (if a derivative make sure you give attribution with an OS license)
  4. Add a rendering of your project along with the link to Thinkiverse in the gallery below following the example.

Optional

  1. If your project turned out really nice you can print it for show and tell
  2. Bonus if your design has high utility and you set up a webpage with the OS customizer along with instructions on how to do it(see: Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD)

Gallery

Add your image and link the gallery below in a single line after the last one in the list