Alex Kampf (talk | contribs) |
Sophivorus (talk | contribs) m (Rename "affiliations" parameter to "organizations", to unify terminology throughout Appropedia) |
||
| (63 intermediate revisions by 11 users not shown) | |||
| Line 1: | Line 1: | ||
[[File:Drip Irrigation Stake assembly.jpg|thumb]] | |||
== | {{Project data | ||
| authors = User:Alex Kampf | |||
| completed = 2014 | |||
| made = Yes | |||
| replicated = No | |||
}} | |||
{{777 notice}} | |||
The OSAT is Drip irrigation assembly combining the stake and drip emitter with tubing. The Drip Irrigation Stake fulfills the purpose of providing an efficient way to water plants while using the minimum amount of water. The drip irrigation system has been around for years, but this is the first of its kind to be 3D printed. | |||
== | == Bill of Materials == | ||
## Super Glue ~3 Dollars | |||
# | ## [[File: Drip Irrigation Stake Top piece1.scad]] | ||
# | ## [[File: Drip Irrigation Stake.scad]] | ||
# | ## [[File: Drip Irrigation Stake Top piece.stl]] | ||
# | ## [[File: Drip Irrigation Stake part.stl]] | ||
# | |||
=== | == Tools needed == | ||
# [[Delta Build Overview:MOST|MOST Delta RepRap]] or similar RepRap 3-D printer | |||
# | |||
== | == Technical Specifications and Assembly Instructions == | ||
Print the stake part of the Drip irrigation stake assembly on its side. Print the top piece with the nozzle pointing up, make sure to print waste material that is as tall as the nozzle in height. | |||
Estimated print time of 1 hour and 40 minutes | |||
=== Common Problems and Solutions === | |||
* Make sure to print the top piece with the tube connector pointing up with waste material that is as tall in order to avoid a failed build of the nozzle segment, also print slower with longer duration on each layer. Lay the stake piece on its side when printing the parts. Otherwise the tube will be clogged and the stake will be structurally unsound, also make sure to put enough glue in between the top piece and the stake piece. | |||
{{Page data | |||
| keywords = 3D printing, drip irrigation, osat, water, plastic | |||
| sdg = SDG09 Industry innovation and infrastructure, SDG12 Responsible consumption and production | |||
| published = 2014 | |||
| organizations = Michigan_Tech's_Open_Sustainability_Technology_Lab, MY4777, MTU | |||
| license = CC-BY-SA-3.0 | |||
| language = en | |||
}} | |||
[[Category:OSAT 3D-Printable Designs]] | |||
[[Category:3D printing]] | |||
[[Category:Water]] | |||
[[Category:Plastic]] | |||
Latest revision as of 16:58, 29 January 2024
The OSAT is Drip irrigation assembly combining the stake and drip emitter with tubing. The Drip Irrigation Stake fulfills the purpose of providing an efficient way to water plants while using the minimum amount of water. The drip irrigation system has been around for years, but this is the first of its kind to be 3D printed.
Bill of Materials[edit | edit source]
Tools needed[edit | edit source]
- MOST Delta RepRap or similar RepRap 3-D printer
Technical Specifications and Assembly Instructions[edit | edit source]
Print the stake part of the Drip irrigation stake assembly on its side. Print the top piece with the nozzle pointing up, make sure to print waste material that is as tall as the nozzle in height.
Estimated print time of 1 hour and 40 minutes
Common Problems and Solutions[edit | edit source]
- Make sure to print the top piece with the tube connector pointing up with waste material that is as tall in order to avoid a failed build of the nozzle segment, also print slower with longer duration on each layer. Lay the stake piece on its side when printing the parts. Otherwise the tube will be clogged and the stake will be structurally unsound, also make sure to put enough glue in between the top piece and the stake piece.