Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.
Dr. Hu solar simulator protocol: MOST
|By Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source 3-D printing.
What is it?
Turning on the machine
Flip the power switch to on To turn on the lamp:
- Press the lamp start button
To turn off the lamp:
- Press the lamp off button
Machine should be precalibrated to approximately 1.0 kW/sq. meter, however this is only within about two inches away from the front of the solar sim. In other words your samples will be getting exactly one sun as long as they are within two inches of the solar simulator. The solar simulator will give less radiation the farther away your samples are from the front of the machine.
Link to specs: