We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Difference between revisions of "Dial Indicator"

From Appropedia
Jump to navigation Jump to search
Line 119: Line 119:
== Common Problems and Solutions==
== Common Problems and Solutions==
* Make sure that the wedges that lock into each other are both wide enough and deep enough so that they do not break when you try and lock the Hemostats down.
* Make sure the nut & bolt are loose enough to allow free movement of the hemostats.
* Make sure the all of the pieces are thick enough as to not bend under forces ('''minimum of 4mm thickness is recommended''')
== Cost savings==
== Cost savings==

Revision as of 00:56, 8 December 2018


Project developed by User:Patrick Gilland
This OSAT has been designed but not yet tested - use at own risk.
This OSAT has been prototyped.

You can help Appropedia by contributing to the next step in this OSAT's status.


  1. A dial indicator is a tool used to measure linear displacements. It accomplishes so via the use of a plunger that's constricted to a measured linear movement. Simply, when the plunger is pushed into the body of the tool, the distance it is pushed in is "indicated" on the "dial" face of the tool. This is useful for any kind of precise measurement of thickness, depth, width, and can even be used to ensure a machining device or tool is accurately trammed.
  1. Picture of completed print using your printer

Bill of Materials

Part Quantity Source Comments
PLA ~XX grams Filament supplier of choice Color of choice
Dial Indicator Body 1 [/ Youmagine] Using PLA
Dial Indicator Top 1 [/ Youmagine] Using PLA
Spacer 3 [/ Youmagine] Using PLA
Dial Indicator Needle 1 [/ Youmagine] Using PLA
Gear 1-2 1 [/ Youmagine] Using PLA
Gear 3-4 1 [/ Youmagine] Using PLA
Gear 5-6 1 [/ Youmagine] Using PLA
Dial Indicator Plunger 1 [/ Youmagine] Using PLA
Gear 7 1 [/ Youmagine] Using PLA
1/8 Diameter Button Head Cap Screw 1 inch long 3
1/8 Diameter Button Head Cap Screw 1.25 inch long 1
1/8 Diameter Nylock Nut 4
1/8 Inner Diameter Washer 8

Tools needed for fabrication of the OSAT

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. XX Hex Head Allen Wrench
  3. XX Open End Box Wrench


Skills and Knowledge Necessary to Make the OSAT

  • 3D Printing Knowledge & Capabilities
  • Understand the needs & application for a dial indicator
  • Ability to assemble fasteners and critically aligned plastic components

Technical Specifications and Assembly Instructions

  1. Download and print the plastic components listed in the bill of materials
  • Recommended: Print with a 100% infill at 0.25mm layer thickness or less, print speed may vary depending on printer
  1. Clean burrs and excess plastic from parts that may be remaining from print
  2. Align the corresponding components from the bill of materials to the pictures posted below while ensuring:
    1. All holes align
    2. All gears mesh together
    3. L
  3. Assemble Fasteners so that the head of the screws are on the face of the indicator and washers are on both mating surfaces
  4. Lightly tighten fasteners so that gears spin freely with minimal slop
  5. Assemble needle so that needle is spaced away from dial face

Common Problems and Solutions

Cost savings

  • 25g of PLA ($0.40 USD) + 3mm Nut ($0.13 USD) + 3mm x 12mm bolt ($0.33 USD) = $0.86 USD Total
  • Compared to $4.27 USD Cheapest Hemostats I Could Find
  • Cost savings of $3.41 USD (79.9% cost savings)
  • The biggest benefit is not cost, but availability when Amazon delivery is not an option in a remote or devastated area.

Benefited Internet Communities

Name and add links to at least 5 using single brackets around [url name]:


  • These hemostats were designed based on my own used of them

Bill of Materials

Tools Needed for Creation of OSAT

Skills and Knowledge Necessary to Create OSAT

Technical Specification and Assembly Instruction

Common Problems and Solutions

Cost Savings

Benefitted Communities