Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.
Delta Pilot Holes:MOST
| By Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source 3-D printing.
|This page is part of an international project to use RepRap 3-D printing to make OSAT for sustainable development. Learn more.
Research: Open source 3-D printing of OSAT • RecycleBot • LCA of home recycling • Green Distributed Recycling • Ethical Filament • LCA of distributed manufacturing • RepRap LCA Energy and CO2 • Solar-powered RepRaps • solar powered recyclebot • Feasibility hub • Mechanical testing • RepRap printing protocol: MOST• Lessons learned • MOST RepRap Build • MOST Prusa Build • MOST HS RepRap build • RepRap Print Server
Materials and Tools
Linking board mounting screws are located in difficult-to-reach locations and pilot holes greatly simplify assembly of the motor and idler ends. Pilot holes may be drilled in other wooden structural components and those will be treated in their respective assembly steps.
To minimize swelling and shrinking due to changes in humidity, sealing the plywood is recommended.
See video instructions on Motor End Assembly.
- There are two linking board pilot hole jigs for accurately locating the positions of pilot holes. One each for the left and right sides of the boards. Ream the holes in the triangular pattern with a 3mm (1/8") drill bit.
- Repeat with the remaining linking boards.
|Tandem Build MOST Delta Navigation|
|Green indicate workshop tasks|
|Soldering and tinning|
|Assembling hot end|
|Drilling Pilot Holes|
|Person 1||Person 2|
|Tie Rods and Pulleys||Epoxying Magnets|
|Motor End Assembly||Idler End Assembly|
|Extruder Drive||Mount Bases|