(5 intermediate revisions by 3 users not shown)
Line 2: Line 2:


==Obtaining source material==
==Obtaining source material==
A variety of plants can be used, aswell as tree bark (more specifically the cambium layer within it).  Depending on the plant, different techniques are used to obtain the fibres to make the rope. See [http://www.ssrsi.org/sr2/Indust/ropenet.htm SSRI], [http://survivalblog.se/2006/11/making-traditional-cordage-in.html Survivalblog], [http://www.primitiveways.com/cordage_in_North_America.html PrimitiveWays] ,... for a list of plants that can be used and the way to obtain the fibres. Sometimes, [http://en.wikipedia.org/wiki/Retting retting] is necessairy
A variety of plants can be used, as well as tree bark (more specifically the cambium layer within it).  Depending on the plant, different techniques are used to obtain the fibres to make the rope. See [http://www.ssrsi.org/sr2/Indust/ropenet.htm SSRI], [http://survivalblog.se/2006/11/making-traditional-cordage-in.html Survivalblog], [http://www.primitiveways.com/cordage_in_North_America.html PrimitiveWays] ,... for a list of plants that can be used and the way to obtain the fibres. Sometimes, [http://en.wikipedia.org/wiki/Retting retting] is necessary


==Procedure==
==Procedure==
Line 10: Line 10:


==Method 2: reverse wrap==
==Method 2: reverse wrap==
[[File:Cordage_making_modified.png|thumb|right|200px|
 
*1: A strand of fiber is rolled on the pants until the rope kinks
*2: The kink is taken with thumb and index finger and is wrapped around counter clockwise on itself (towards the person)
*3: One strand is longer (LS; long strand), another is shorter (SS; short strand); after this an endknot is made or a new strand is inserted
*4:
*5:
<ref>[http://www.nativetech.org/cordage/ NativeTech animation]</ref>]]
This second method allows for a much stronger wrap. To create it, start by twisting the fiber bundle in the middle until it kinks . . . then hold the kink between the thumb and index finger of one hand. With the fingers of the second hand, twist the bottom strand toward you and wrap it once around the other. Now, hold this wrap with the first hand and twist the new bottom strand toward you and wrap it around the other. Repeat the process along the entire length of your cord. If you need only a short section, tie a knot at the end of the double-wrapped piece and use it as is.
This second method allows for a much stronger wrap. To create it, start by twisting the fiber bundle in the middle until it kinks . . . then hold the kink between the thumb and index finger of one hand. With the fingers of the second hand, twist the bottom strand toward you and wrap it once around the other. Now, hold this wrap with the first hand and twist the new bottom strand toward you and wrap it around the other. Repeat the process along the entire length of your cord. If you need only a short section, tie a knot at the end of the double-wrapped piece and use it as is.
For more detail see [http://www.nativetech.org/cordage/ the Nativetech website]


==See also==
==See also==

Revision as of 14:47, 16 July 2013

This article details the making of traditional cordage/rope. Although commonly made from synthetic materials or specific plants such as manila hemp, hemp, linen, cotton, coir, jute, and sisal, it is possible to make cordage from a variety of plants. Self-made cordage is useful for low important tasks/tasks that require little tensile strength (ie espaliering, bowstrings, fishing lines, trap triggers, snares, lashings, ...) The techniques described herein require no special tool (ie ring spinning frame, ...).

Obtaining source material

A variety of plants can be used, as well as tree bark (more specifically the cambium layer within it). Depending on the plant, different techniques are used to obtain the fibres to make the rope. See SSRI, Survivalblog, PrimitiveWays ,... for a list of plants that can be used and the way to obtain the fibres. Sometimes, retting is necessary

Procedure

Method 1: simple wrap

Images: see http://www.wildwoodsurvival.com/survival/cordage/men79/index.html The first method discussed creates a wrap that is relatively fast to execute yet is less strong than the reverse wrap. To create it, hold onto the ends of the fibers and roll the whole bundle against your pants leg in one direction. By making repeated strokes along the entire length, you should be able to twist the fibers into a strand of makeshift cordage that's many times the strength of the original strands of material. Then, to secure the twist, take the middle of the strand in your teeth (make sure, of course, that it's from a nonpoisonous plant!) and bring the two ends together. When you let go with your teeth, the doubled cord will twist around itself naturally.[1][2]

Method 2: reverse wrap

This second method allows for a much stronger wrap. To create it, start by twisting the fiber bundle in the middle until it kinks . . . then hold the kink between the thumb and index finger of one hand. With the fingers of the second hand, twist the bottom strand toward you and wrap it once around the other. Now, hold this wrap with the first hand and twist the new bottom strand toward you and wrap it around the other. Repeat the process along the entire length of your cord. If you need only a short section, tie a knot at the end of the double-wrapped piece and use it as is.

For more detail see the Nativetech website

See also

  • Animal sinew; a cord that is twice as strong as vegetable cord, yet which requires the presence of a (dead)

References

Template:Reflist

Cookies help us deliver our services. By using our services, you agree to our use of cookies.