Compost Toilet Hinge: Difference between revisions

Device data

Manufacturing files	https://www.thingiverse.com/thing:577167
Hardware license	CERN-OHL-S
Certifications	Start OSHWA certification

This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.Read more...

Open Source Composting Toilet Hinge

Project developed by User:Tazmanian60

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

Toilet seats and hinges are an overlooked item in the modern world. A proper seat and hinge provides support for when nature calls. This item may be used in a composting toilet aplication.

1. Picture of completed print using

   

Bill of Materials

1. Plastic for the print
2. Screw
3. Nut

The link for the OpenScad files as well as the STL can be found here: [1]

Tools needed for fabrication of the OSAT

1. MOST Delta RepRap or similar RepRap 3-D printer
2. Screwdriver (sized for the screw)

Skills and Knowledge Necessary to Make the OSAT

• No extra skills necessary

Technical Specifications and Assembly Instructions

1. Print the parts
2. Scrape plastic off
3. Screw the bolt through the holes of the hinge
4. Place nut over bolt

Common Problems and Solutions

1. Problems printing round parts of hinge
   1. Change print quality

Cost savings

• If your solution is not a low cost one then it is not really appropriate.

1. $2 in plastic, $0.10 bolt, $0.05 nut
2. A commercial equivalent can be found at: Toilet Hinge
3. $7.90 Savings or 74.7%