Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Combined photovoltaic solar thermal systems (PVT) literature review"

From Appropedia
Jump to navigation Jump to search
Line 109: Line 109:
  
 
'''Abstract:'''In this paper a dynamic simulation model of a photovoltaic and water heating system (PV/T) is developed. The model consists of a set of mathematical equations governing the main components of the system; namely: transparent cover, solar cell, absorber plate, operating fluid and storage tank. The model is based on the analysis of the energy balance which includes the photo electric conversion and the thermal conduction, convection and radiation. The model gathers all components equations so as to reflect the electrical and thermal behaviour of the PV/T system. It delivers the state equation of the system function of the climatic parameters and the fluid flow rate. The investigation of the effect of water mass flow rate through the collector on PV/T outputs have been carried out.
 
'''Abstract:'''In this paper a dynamic simulation model of a photovoltaic and water heating system (PV/T) is developed. The model consists of a set of mathematical equations governing the main components of the system; namely: transparent cover, solar cell, absorber plate, operating fluid and storage tank. The model is based on the analysis of the energy balance which includes the photo electric conversion and the thermal conduction, convection and radiation. The model gathers all components equations so as to reflect the electrical and thermal behaviour of the PV/T system. It delivers the state equation of the system function of the climatic parameters and the fluid flow rate. The investigation of the effect of water mass flow rate through the collector on PV/T outputs have been carried out.
 +
 +
 +
 +
====[http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=792006&tag=1 Development and characterization of high-efficiency Ga0.5In0.5P/GaAs/Ge dual- and triple-junction solar cells ]
 +
 +
'''Abstract:'''This paper describes recent progress in the characterization, analysis, and development of high-efficiency, radiation-resistant Ga0.5In0.5P/GaAs/Ge dual-junction (DJ) and triple-junction (TJ) solar cells. DJ cells have rapidly transitioned from the laboratory to full-scale (325 kW/year) production at Spectrolab. Performance data for over 470000 large-area (26.94 cm2 ), thin (140 μm) DJ solar cells grown on low-cost, high-strength Ge substrates are shown. Advances in next-generation triple-junction Ga0.5In0.5P/GaAs/Ge cells with an active Ge component cell are discussed, giving efficiencies up to 26.7% (21.65-cm2 area), AM0, at 28°C. Final-to-initial power ratios P/P0 of 0.83 were measured for these n-on-p DJ and TJ cells after irradiation with 1015 1-MeV electrons/cm2 . Time-resolved photoluminescence measurements are applied to double heterostructures grown with semiconductor layers and interfaces relevant to these multijunction solar cells, to characterize surface and bulk recombination and guide further device improvements. Dual- and triple-junction Ga0.5In0.5P/GaAs/Ge cells are compared to competing space photovoltaic technologies, and found to offer 60-75% more end-of-life power than high-efficiency Si cells at a nominal array temperature of 60°C
  
  

Revision as of 05:15, 20 February 2012

Hack the sun.jpg This page was part of an MTU course MY5970/EE5900: Solar Hacking: Photovoltaic Materials, Cells and Systems Engineering

Please leave comments using the discussion tab. The course runs over Spring semester 2012. It is not open edit.


Contents

This page describes selected literature available on PVT

Dispatch strategy and model for hybrid photovoltaic and trigeneration power systems[1]

Abstract: In this work Author(s) present a study of the optoelectronic properties of nanocrystalline GaN (nc-GaN) and amorphous GaON (a‐GaON) grown by ion-assisted deposition. The two classes of film show very distinct photoconductive responses; the nc-GaN has a fast small response while the a‐GaON films have a much larger response which is persistent. To describe the observed intensity, wavelength, and temperature dependence of the photoconductivity in each class of film, Author(s) build a model which takes into account the role of a large density of localized states in the gap. The photoconductivity measurements are supplemented by thermally stimulated conductivity, measurement of the absorption coefficient, and determination of the Fermi level. Using the model to aid author(s) interpretation of this data set, Author(s) are able to characterize the density of states in the gap for the two materials.

A review on photovoltaic/thermal hybrid solar technology[2]

Abstract: A significant amount of research and development work on the photovoltaic/thermal (PVT) technology has been done since the 1970s. Many innovative systems and products have been put forward and their quality evaluated by academics and professionals. A range of theoretical models has been introduced and their appropriateness validated by experimental data. Important design parameters are identified. Collaborations have been underway amongst institutions or countries, helping to sort out the suitable products and systems with the best marketing potential. This article gives a review of the trend of development of the technology, in particular the advancements in recent years and the future work required.

Photovoltaic thermal (PV/T) collectors: A review[3]

Abstract: This paper presents a review of the available literature on PV/T collectors. The review is presented in a thematic way, in order to enable an easier comparison of the findings obtained by various researchers, especially on parameters affecting PV/T performance (electrical and thermal). The review covers the description of flat plate and concentrating, water and air PV/T collector types, analytical and numerical models, simulation and experimental work and qualitative evaluation of thermal/electrical output. The parameters affecting PV/T performance, such as covered versus uncovered PV/T collectors, optimum mass flow rate, absorber plate parameters (i.e. tube spacing, tube diameter, fin thickness), absorber to fluid thermal conductance and configuration design types are extensively discussed. Based on an exergy analysis, it was reported that the coverless PV/T collector produces the largest available total (electrical + thermal) exergy. From the literature review, it is clear that PV/T collectors are very promising devices and further work should be carried out aiming at improving their efficiency and reducing their cost, making them more competitive and thus aid towards global expansion and utilization of this environmentally friendly renewable energy device.

Hydrogenated Amorphous Silicon PV an an Absorber Coating for Photovoltaic Thermal Systems

Abstract: Driven by the limitations of solar-optimized roof space and International Energy Association (IEA) Task 35, there is a renewed interest in photovoltaic solar thermal (PVT) hybrid systems. Current PVT systems focus on cooling the solar photovoltaic (PV) cells to improve the electrical performance. This however, causes the thermal component (T) to underperform. An exergetic study was completed comparing a PVT, PV + T and a PV only system in Detroit, Denver and Phoenix. It was found that the PVT system outperformed the PV + T system by 72% for each location and by 8, 8.6 and 9.9% for Detroit, Denver and Phoenix when compared to the PV only system. To further improve the PVT system, using hydrogenated amorphous silicon (a-Si:H) PV as the absorber layer of the solar thermal device was explored. The temperature coefficient and annealing properties of a-Si:H allow the thermal component to run more efficiently, while enabling the a-Si:H i-layers to be thicker resulting in more electricity production. It was found that running i-layer thicker cells (630nm and 840nm) stabilized at higher efficiencies at 90°C (potential PVT operating temperatures) than the thinner cell (420nm) by 2% and 0.5% respectively. In addition, spike annealing, which is a new concept of stagnating a PVT system to allow for the a-Si:H PV to anneal and return it to its original efficiencies was also investigated. It was found that over the lifetime of the system with the spike annealing occurring once a day 10.6% more electricity was produced than a system without stagnation.

High-efficiency a-Si/c-Si heterojunction solar cell[4]

Abstract: An aperture-area conversion efficiency of 20.0% (intrinsic efficiency: 21.0%) has been achieved for a 1.0 cm2 CZ n-type single crystalline silicon (c-Si) solar cell, by using the “HIT (heterojunction with intrinsic thin-layer)” structure on both sides of the cell. This is the world's highest value for a c-Si solar cell in which the junction is fabricated at a low temperature of below 200°C. In this paper, the junction fabrication technologies and features of the HIT structure are reviewed. The stability under light and thermal exposure, and the temperature dependence on performance of a high-efficiency HIT solar cell are also reported.

Hybrid photovoltaic and thermal solar-collector designed for natural circulation of water[5]

Abstract:The electricity conversion-efficiency of a solar cell for commercial application is about 6–15%. More than 85% of the incoming solar energy is either reflected or absorbed as heat energy. Consequently, the working temperature of the solar cells increases considerably after prolonged operations and the cell’s efficiency drops significantly. The hybrid photovoltaic and thermal (PVT) collector technology using water as the coolant has been seen as a solution for improving the energy performance. Through good thermal-contact between the thermal absorber and the PV module, both the electrical efficiency and the thermal efficiency can be raised. Fin performance of the heat exchanger is one crucial factor in achieving a high overall energy yield. In this paper, the design developments of the PVT collectors are briefly reviewed. Author(s) observation is that very few studies have been done on the PVT system adopting a flat-box absorber design. Accordingly, an aluminum-alloy flat-box type hybrid solar collector functioned as a thermosyphon system was constructed. While the system efficiencies did vary with the operating conditions, the test results indicated that the daily thermal efficiency could reach around 40% when the initial water-temperature in the system is the same as the daily mean ambient temperature.

Design, fabrication and performance evaluation of a hybrid photovoltaic thermal (PVT) double slope active solar still[6]

Abstract: A modified photovoltaic thermal (PVT) double slope active solar still was designed and fabricated for remote locations. The system has been installed at the campus of KIET, Ghaziabad (India) and its performance has been experimentally evaluated under field conditions in natural and forced circulation mode (series and parallel). Photovoltaic operated DC water pump has been used between solar still and photovoltaic (PV) integrated flat plate collector to re-circulate the water through the collectors and transfer it to the solar still. The production rate has been accelerated to 1.4 times than the single slope hybrid (PVT) active solar still and obtained highest (7.54 kg/day) for the parallel configuration in forced mode in the month of October, 2010. The daily average energy efficiency of the solar still is obtained as 17.4%. Comparative results have been predicted on annual basis with the single slope hybrid (PVT) active solar still accounting 250, 275 and 300 clear days in a year. Author(s) have found that energy payback time is significantly reduced by almost 30% in present design with less capital investment.

Hybrid photovoltaic/thermal solar systems[7]

Abstract: Author(s) present test results on hybrid solar systems, consisting of photovoltaic modules and thermal collectors (hybrid PV/T systems). The solar radiation increases the temperature of PV modules, resulting in a drop of their electrical efficiency. By proper circulation of a fluid with low inlet temperature, heat is extracted from the PV modules keeping the electrical efficiency at satisfactory values. The extracted thermal energy can be used in several ways, increasing the total energy output of the system. Hybrid PV/T systems can be applied mainly in buildings for the production of electricity and heat and are suitable for PV applications under high values of solar radiation and ambient temperature. Hybrid PV/T experimental models based on commercial PV modules of typical size are described and outdoor test results of the systems are presented and discussed. The results showed that PV cooling can increase the electrical efficiency of PV modules, increasing the total efficiency of the systems. Improvement of the system performance can be achieved by the use of an additional glazing to increase thermal output, a booster diffuse reflector to increase electrical and thermal output, or both, giving flexibility in system design.

Analytical expression for electrical efficiency of PV/T hybrid air collector[8]

Abstract: The overall electrical efficiency of the photovoltaic (PV) module can be increased by reducing the temperature of the PV module by withdrawing the thermal energy associated with the PV module. In this communication an attempt has been made to develop analytical expression for electrical efficiency of PV module with and without flow as a function of climatic and design parameters. The four different configurations of PV modules are considered for the present study which are defined as; case A (Glass to glass PV module with duct), case B (Glass to glass PV module without duct), case C (Glass to tedlar PV module with duct), case D (Glass to tedlar PV module without duct). Further, experiments were carried out for all configurations under composite climate of New Delhi.

It is found that the glass to glass PV modules with duct gives higher electrical efficiency as well as the higher outlet air temperature amongst the all four cases. The annual effect on electrical efficiency of glass to glass type PV module with and without duct is also evaluated. The annual average efficiency of glass to glass type PV module with and without duct is 10.41% and 9.75%, respectively.

Performance evaluation of solar photovoltaic/thermal systems[9]

Abstract: The major purpose of the present study is to understand the performance of an integrated photovoltaic and thermal solar system (IPVTS) as compared to a conventional solar water heater and to demonstrate the idea of an IPVTS design. A commercial polycrystalline PV module is used for making a PV/T collector. The PV/T collector is used to build an IPVTS. The test results show that the solar PV/T collector made from a corrugated polycarbonate panel can obtain a good thermal efficiency. The present study introduces the concept of primary-energy saving efficiency for the evaluation of a PV/T system. The primary-energy saving efficiency of the present IPVTS exceeds 0.60. This is higher than for a pure solar hot water heater or a pure PV system. The characteristic daily efficiency ηs* reaches 0.38 which is about 76% of the value for a conventional solar hot water heater using glazed collectors (ηs*=0.50). The performance of a PV/T collector can be improved if the heat-collecting plate, the PV cells and the glass cover are directly packed together to form a glazed collector. The manufacturing cost of the PV/T collector and the system cost of the IPVTS can also be reduced. The present study shows that the idea of IPVTS is economically feasible too.

Study of a new concept of photovoltaic–thermal hybrid collector[10]

Abstract: This work represents the second step of the development of a new concept of photovoltaic/thermal (PV/T) collector. This type of collector combines preheating of the air and the production of hot water in addition to the classical electrical function of the solar cells. The alternate positioning of the thermal solar collector section and the PV section permits the production of water at higher mean temperatures than most of existing hybrid collectors. These higher temperatures will allow the coupling of components such as solar cooling devices during the summer and obviously a direct domestic hot water (DHW) system without the need for additional auxiliary heating systems. In this paper, a simplified steady-state two-dimensional mathematical model of a PV/T bi-fluid (air and water) collector with a metal absorber is developed. Then, a parametric study (numerically and experimentally) is undertaken to determine the effect of various factors such as the water mass flow rate on the solar collector thermal performances. Finally, the results from an experimental test bench and the first simulation results obtained on full scale experiments are compared.

Expanding photovoltaic penetration with residential distributed generation from hybrid solar photovoltaic and combined heat and power systems[11]

Abstract: The recent development of small scale combined heat and power (CHP) systems has provided the opportunity for in-house power backup of residential-scale photovoltaic (PV) arrays. This paper investigates the potential of deploying a distributed network of PV + CHP hybrid systems in order to increase the PV penetration level in the U.S. The temporal distribution of solar flux, electrical and heating requirements for representative U.S. single family residences were analyzed and the results clearly show that hybridizing CHP with PV can enable additional PV deployment above what is possible with a conventional centralized electric generation system. The technical evolution of such PV + CHP hybrid systems was developed from the present (near market) technology through four generations, which enable high utilization rates of both PV-generated electricity and CHP-generated heat. A method to determine the maximum percent of PV-generated electricity on the grid without energy storage was derived and applied to an example area. The results show that a PV + CHP hybrid system not only has the potential to radically reduce energy waste in the status quo electrical and heating systems, but it also enables the share of solar PV to be expanded by about a factor of five.

Optimizing design of household scale hybrid solar photovoltaic + combined heat and power systems for Ontario[12]

Abstract: This paper investigates the feasibility of implementing a hybrid solar photovoltaic (PV) + combined heat and power (CHP) and battery bank system for a residential application to generate reliable base load power to the grid in Ontario. Deploying PV on a large-scale has a penetration level threshold due to the inherent power supply intermittency associated with the solar resource. By creating a hybrid PV+CHP system there is potential of increasing the PV penetration level. One year of one second resolution pyranometer data is analyzed for Kingston Ontario to determine the total amount of PV energy generation potential, the rate of change of PV power generation due to intermittent cloud cover, and the daily CHP run time required to supply reliable base load power to the grid using this hybrid system. This analysis found that the vast majority of solar energy fluctuations are small in magnitude and the worst case energy fluctuation can be accommodated by relatively inexpensive and simple storage with conventional lead-acid batteries. For systems where the PV power rating is identical to the CHP unit, the CHP unit must run for more than twenty hours a day for the system to meet the base load requirement during the winter months. This provides a fortunate supply of heat, which can be used for the needed home heating. This paper provides analysis for a preliminary base line system.

Flat-plate PV-Thermal collectors and systems: A review[13]

Abstract: Over the last 30 years, a large amount of research on PV-Thermal (PVT) collectors has been carried out. An overview of this research is presented, both in terms of an historic overview of research projects and in the form of a thematic overview, addressing the different research issues for PVT.

A combined optimisation concet for the design and operation strategy of hybrid-PV energy systems[14]

Abstract: This paper presents a method to jointly determine the sizing and operation control of hybrid-PV systems. Hybrid energy systems use different energy sources such as solar and wind energy and diesel gensets. They are an economical option in areas remote from the grid. In this context the correct and cost-effective system sizing as well as efficient system operation are important. The problem becomes complicated through uncertain renewable energy supplies and load demand, non-linear characteristics of some components, and the fact that optimum operation strategies and optimum sizing of hybrid system components are interdependent. The outlined approach finds an optimum operation strategy for a hybrid system by carrying out a search through possible options for the system operation control. The search is conducted over some time period using estimated weather and demand data and long-term system component characteristics. The costing of the operating strategies is evaluated and component sizes are changed by the designed algorithm according to optimum search rules. As a result an optimum system configuration is chosen by the algorithm together with an optimum operation strategy for a given site and application requirement.

Enhanced thermoelectric performance of rough silicon nanowires

Abstract: Approximately 90 per cent of the world's power is generated by heat engines that use fossil fuel combustion as a heat source and typically operate at 30–40 per cent efficiency, such that roughly 15 terawatts of heat is lost to the environment. Thermoelectric modules could potentially convert part of this low-grade waste heat to electricity. Their efficiency depends on the thermoelectric figure of merit ZT of their material components, which is a function of the Seebeck coefficient, electrical resistivity, thermal conductivity and absolute temperature. Over the past five decades it has been challenging to increase ZT > 1, since the parameters of ZT are generally interdependent. While nanostructured thermoelectric materials can increase ZT > 1, the materials (Bi, Te, Pb, Sb, and Ag) and processes used are not often easy to scale to practically useful dimensions. Here Author(s) report the electrochemical synthesis of large-area, wafer-scale arrays of rough Si nanowires that are 20–300 nm in diameter. These nanowires have Seebeck coefficient and electrical resistivity values that are the same as doped bulk Si, but those with diameters of about 50 nm exhibit 100-fold reduction in thermal conductivity, yielding ZT = 0.6 at room temperature. For such nanowires, the lattice contribution to thermal conductivity approaches the amorphous limit for Si, which cannot be explained by current theories. Although bulk Si is a poor thermoelectric material, by greatly reducing thermal conductivity without much affecting the Seebeck coefficient and electrical resistivity, Si nanowire arrays show promise as high-performance, scalable thermoelectric materials.

Performance evaluation of low concentrating photovoltaic/thermal systems: A case study from Sweden

Abstract: Some of the main bottlenecks for the development and commercialization of photovoltaic/thermal hybrids are the lack of an internationally recognized standard testing procedure as well as a method to compare different hybrids with each other and with conventional alternatives. A complete methodology to characterize, simulate and evaluate concentrating photovoltaic/thermal hybrids has been proposed and exemplified in a particular case study. By using the suggested testing method, the hybrid parameters were experimentally determined. These were used in a validated simulation model that estimates the hybrid outputs in different geographic locations. Furthermore, the method includes a comparison of the hybrid performance with conventional collectors and photovoltaic modules working side-by-side. The measurements show that the hybrid electrical efficiency is 6.4% while the optical efficiency is 0.45 and the U-value 1.9 W/m2 °C. These values are poor when compared with the parameters of standard PV modules and flat plate collectors. Also, the beam irradiation incident on a north–south axis tracking surface is 20–40% lower than the global irradiation incident on a fixed surface at optimal tilt. There is margin of improvement for the studied hybrid but this combination makes it difficult for concentrating hybrids to compete with conventional PV modules and flat plate collectors.

Performance analysis of photovoltaic-thermal collector by explicit dynamic model

Abstract: Although the performance of hybrid photovoltaic-thermal (PV/T) collector had been studied both experimentally and numerically for some years, the thermal models developed in previous studies were mostly steady-state models for predicting the annual yields. The operation of a PV/T collector is inherently dynamic. A steady-state model is not suitable for predicting working temperatures of the PV module and the heat-removal fluid during periods of fluctuating irradiance or intermittent fluid flow. Based on the control-volume finite-difference approach, an explicit dynamic model was developed for a single-glazed flat-plate water-heating PV/T collector. A transport delay fluid flow model was incorporated. The proposed model is suitable for dynamic system simulation applications. It allows detailed analysis of the transient energy flow across various collector components and captures the instantaneous energy outputs.

Electrical and thermal characterization of a PV-CPC hybrid

Abstract: Long term evaluation of an asymmetric CPC PV-thermal hybrid built for high latitudes, MaReCo (MaximumReflectorCollector), is performed in Lund, lat 55.7°, and this paper discusses output estimates and characteristics of the system. The output estimates are calculated using the MINSUN simulation program. To get the input for MINSUN, measurements were performed on two MaReCo prototypes. These measurements show that the front reflector collects most of the irradiation in the summer, and the back reflector in the spring and fall. Two different reflector materials were used, anodized aluminium and aluminium laminated steel. The steel based reflector was selected for its rigidness. The output estimates show no difference in yearly output between the two reflector materials, both back reflectors deliver 168 kW h/(m2 cell area) of electricity compared to 136 kW h/m2 cell area for cells without reflectors. The cells facing the front reflector deliver 205 kW h/(m2 cell area) of electricity. The estimated output of thermal energy was 145 kW h/(m2 glazed area) at 50 °C. The estimates show that the optimal placement of the photovoltaic cells is facing the front reflector, but having cells on both sides is in most cases the best option.

Optimal design of orientation of PV/T collector with reflectors

Abstract: Hybrid conversion of solar radiation implies simultaneous solar radiation conversion into thermal and electrical energy in the PV/Thermal collector. In order to get more thermal and electrical energy, flat solar radiation reflectors have been mounted on PV/T collector. To obtain higher solar radiation intensity on PV/T collector, position of reflectors has been changed and optimal position of reflectors has been determined by both experimental measurements and numerical calculation so as to obtain maximal concentration of solar radiation intensity. The calculated values have been found to be in good agreement with the measured ones, both yielding the optimal position of the flat reflector to be the lowest (5°) in December and the highest (38°) in June. In this paper, the thermal and electrical efficiency of PV/T collector without reflectors and with reflectors in optimal position have been calculated. Using these results, the total efficiency and energy-saving efficiency of PV/T collector have been determined. Energy-saving efficiency for PV/T collector without reflectors is 60.1%, which is above the conventional solar thermal collector, whereas the energy-saving efficiency for PV/T collector with reflectors in optimal position is 46.7%, which is almost equal to the values for conventional solar thermal collector. Though the energy-saving efficiency of PV/T collector decreases slightly with the solar radiation intensity concentration factor, i.e. the thermal and electrical efficiency of PV/T collector with reflectors are lower than those of PV/T collector without reflectors, the total thermal and electrical energy generated by PV/T collector with reflectors in optimal position are significantly higher than total thermal and electrical energy generated by PV/T collector without reflectors.

Photovoltaic / Thermal System for Stand-Alone Operation

Abstract: The growing demand for the utilization of clean energy resources requires consideration of more efficient and economical ways in the usage of available resources and technologies. In the field of solar energy both the efficiency and the economics, i.e. the payback times are crucial questions for a more widespread application of this resource in the future. A novel solution and system are proposed in the paper aimed at enhancing the amount of energy that can be harvested from solar radiation in the same area. The basis of the method presented is a special construction of combined Photovoltaic / Thermal panels that can generate heat power to produce hot water, while the photovoltaic part provides electric power for covering the electric power consumption of loads, to supply its own electronic control units and to operate pump drives etc. The theoretical predictions of the electric part of the system are confirmed by laboratory test results. The system and the overall control structure, including the MPPT control, are presented assuming stand-alone operation but parallel operation is also possible.

Combined Photovoltaic / Thermal Energy System for Stand-alone Operation

Abstract: The utilization of solar energy can be made by photovoltaic (PV) cells to generate electric power directly and solar thermal (T) panels can be applied to generate heat power. When the utilization of the solar energy is necessary to generate electric power, the option of using T panels in combination with some heat / electric power conversion technology can be a viable solution. The power generated by utilizing the solar energy absorbed by a given area of solar panel can be increased if the two technologies, PV and T cells, are combined in such a way that the resulting unit will be capable of co-generation of heat and electric power. In the present paper combined Photovoltaic / Thermal panels are suggested to generate heat power to produce hot water, while the photovoltaic part is used to obtain electric power mainly for covering the electric power consumption of the system, to supply the electronic control units and to operate pump drives etc. Ac and dc supplies are provided by converters for covering self-consumption and possibly the need of some household appliances. The development and design of the system is made by extensive use of modeling and simulation techniques. In the paper a part of the simulation studies, carried out to determine the energy balance in the electric energy conversion section of the system and the control structure, assuming stand-alone operation is presented.

Application Aspects Of Hybrid PV/T Solar Systems

Abstract: PV modules show temperature increase during their operation due to the absorption of solar radiation, as most of it is converted into heat and not into electricity. Hybrid Photovoltaic/Thermal (PV/T) solar systems combine a simultaneous conversion of solar radiation in electricity and heat. These devices consist of PV modules and heat extraction units mounted together, by which a circulating fluid of lower temperature than that of PV modules is heated by cooling them. An extensive study on water and air cooled PV/T solar systems has been conducted at the University of Patras, where hybrid prototypes have been experimentally studied. The water cooled PV/T systems consist of metallic heat exchanger placed at PV module rear surface, by which water circulating through pipes is heated. The methodology of Life Cycle Assessment (LCA) has been used to do an energetic and environmental assessment of the heat recovery system. The goal of this study, carried out at the University of Rome “ La Sapienza”, was to verify the benefits of heat recovery, implemented by a specific software for LCA, SimaPro 5.0. In this work we present the design, performance and aspects of improved PV/T systems based on the LCA results, giving guidelines for their application.

Performance Analysis of a Photovoltaic-Thermal Integrated System

Abstract:The present commercial photovoltaic solar cells (PV) converts solar energy into electricity with a relatively low efficiency, less than 20%. More than 80% of the absorbed solar energy is dumped to the surroundings again after photovoltaic conversion. Hybrid PV/T systems consist of PV modules coupled with the heat extraction devices. The PV/T collectors generate electric power and heat simultaneously. Stabilizing temperature of photovoltaic modules at low level is higly desirable to obtain efficiency increase. The total efficiency of 60–80% can be achieved with the whole PV/T system provided that the T system is operated near ambient temperature. The value of the low-T heat energy is typically much smaller than the value of the PV electricity. The PV/T systems can exist in many designs, but the most common models are with the use of water or air as a working fuid. Efficiency is the most valuable parameter for the economic analysis. It has substantial meaning in the case of installations with great nominal power, as air-cooled Building Integrated Photovoltaic Systems (BIPV). In this paper the performance analysis of a hybrid PV/T system is presented: an energetic analysis as well as an exergetic analysis. Exergy is always destroyed when a process involves a temperature change. This destruction is proportional to the entropy increase of the system together with its surroundings—the destroyed exergy has been called anergy. Exergy analysis identifies the location, the magnitude, and the sources of thermodynamic inefficiences in a system. This information, which cannot be provided by other means (e.g., an energy analysis), is very useful for the improvement and cost-effictiveness of the system. Calculations were carried out for the tested water-cooled ASE-100-DGL-SM Solarwatt module.

Design of Novel Compound Fresnel Lens for High-Performance Photovoltaic Concentrator

Abstract:We present a new design of compound Fresnel-R concentrator which is composed of two lenses: a primary lens (Fresnel lens) that works by total internal reflection at outer sawteeth but refraction at inner sawteeth, and a ringed secondary lens that works by refraction. In contrast to previous Fresnel lens concentrators, this design increases the acceptance angle, improves the irradiance uniformity on the solar cell, and reduces the aspect ratio significantly. Meanwhile several sawteeth of the primary Fresnel lens can correspond to a same ring of secondary lens, which will efficiently lower the complexity of designing and manufacturing. Moreover, in order to reduce the influence of manufacturing tolerances and to increase the optical efficiency further, the central part of the bottom of the secondary lens which directly adhered to the solar cell is designed as a cone-shaped prism to collect the sunlight that does not reach the solar cell. Finally, we provide simulations and analyses of the design method an optical efficiency more than 80% and an aspect ratio smaller than 0.5 can be achieved.


A dynamic model of hybrid photovoltaic/thermal panel

Abstract:In this paper a dynamic simulation model of a photovoltaic and water heating system (PV/T) is developed. The model consists of a set of mathematical equations governing the main components of the system; namely: transparent cover, solar cell, absorber plate, operating fluid and storage tank. The model is based on the analysis of the energy balance which includes the photo electric conversion and the thermal conduction, convection and radiation. The model gathers all components equations so as to reflect the electrical and thermal behaviour of the PV/T system. It delivers the state equation of the system function of the climatic parameters and the fluid flow rate. The investigation of the effect of water mass flow rate through the collector on PV/T outputs have been carried out.


====Development and characterization of high-efficiency Ga0.5In0.5P/GaAs/Ge dual- and triple-junction solar cells

Abstract:This paper describes recent progress in the characterization, analysis, and development of high-efficiency, radiation-resistant Ga0.5In0.5P/GaAs/Ge dual-junction (DJ) and triple-junction (TJ) solar cells. DJ cells have rapidly transitioned from the laboratory to full-scale (325 kW/year) production at Spectrolab. Performance data for over 470000 large-area (26.94 cm2 ), thin (140 μm) DJ solar cells grown on low-cost, high-strength Ge substrates are shown. Advances in next-generation triple-junction Ga0.5In0.5P/GaAs/Ge cells with an active Ge component cell are discussed, giving efficiencies up to 26.7% (21.65-cm2 area), AM0, at 28°C. Final-to-initial power ratios P/P0 of 0.83 were measured for these n-on-p DJ and TJ cells after irradiation with 1015 1-MeV electrons/cm2 . Time-resolved photoluminescence measurements are applied to double heterostructures grown with semiconductor layers and interfaces relevant to these multijunction solar cells, to characterize surface and bulk recombination and guide further device improvements. Dual- and triple-junction Ga0.5In0.5P/GaAs/Ge cells are compared to competing space photovoltaic technologies, and found to offer 60-75% more end-of-life power than high-efficiency Si cells at a nominal array temperature of 60°C



References

  1. A. Nosrat and J. M. Pearce, “Dispatch strategy and model for hybrid photovoltaic and trigeneration power systems,” Applied Energy, vol. 88, no. 9, pp. 3270-3276, Sep. 2011.
  2. C. T.T., “A review on photovoltaic/thermal hybrid solar technology,” Applied Energy, vol. 87, no. 2, pp. 365-379, Feb. 2010.
  3. P. G. Charalambous, G. G. Maidment, S. A. Kalogirou, and K. Yiakoumetti, “Photovoltaic thermal (PV/T) collectors: A review,” Applied Thermal Engineering, vol. 27, no. 2–3, pp. 275-286, Feb. 2007.
  4. T. Sawada et al., “High-efficiency a-Si/c-Si heterojunction solar cell,” in IEEE Photovoltaic Specialists Conference - 1994, 1994 IEEE First World Conference on Photovoltaic Energy Conversion, 1994., Conference Record of the Twenty Fourth, 1994, vol. 2, pp. 1219-1226 vol.2.
  5. W. He, T.-T. Chow, J. Ji, J. Lu, G. Pei, and L.-shun Chan, “Hybrid photovoltaic and thermal solar-collector designed for natural circulation of water,” Applied Energy, vol. 83, no. 3, pp. 199-210, Mar. 2006.
  6. G. Singh, S. Kumar, and G. N. Tiwari, “Design, fabrication and performance evaluation of a hybrid photovoltaic thermal (PVT) double slope active solar still,” Desalination, vol. 277, no. 1–3, pp. 399-406, Aug. 2011.
  7. Y. Tripanagnostopoulos, T. Nousia, M. Souliotis, and P. Yianoulis, “Hybrid photovoltaic/thermal solar systems,” Solar Energy, vol. 72, no. 3, pp. 217-234, Mar. 2002.
  8. S. Dubey, G. S. Sandhu, and G. N. Tiwari, “Analytical expression for electrical efficiency of PV/T hybrid air collector,” Applied Energy, vol. 86, no. 5, pp. 697-705, May 2009.
  9. B. J. Huang, T. H. Lin, W. C. Hung, and F. S. Sun, “Performance evaluation of solar photovoltaic/thermal systems,” Solar Energy, vol. 70, no. 5, pp. 443-448, 2001.
  10. Y. B. Assoa, C. Menezo, G. Fraisse, R. Yezou, and J. Brau, “Study of a new concept of photovoltaic–thermal hybrid collector,” Solar Energy, vol. 81, no. 9, pp. 1132-1143, Sep. 2007.
  11. P. J.M., “Expanding photovoltaic penetration with residential distributed generation from hybrid solar photovoltaic and combined heat and power systems,” Energy, vol. 34, no. 11, pp. 1947-1954, Nov. 2009.
  12. P. Derewonko and J. M. Pearce, “Optimizing design of household scale hybrid solar photovoltaic + combined heat and power systems for Ontario,” in 2009 34th IEEE Photovoltaic Specialists Conference (PVSC), 2009, pp. 001274-001279.
  13. Z. H.A., “Flat-plate PV-Thermal collectors and systems: A review,” Renewable and Sustainable Energy Reviews, vol. 12, no. 4, pp. 891-959, May 2008.
  14. S.-H. G.C., “A combined optimisation concet for the design and operation strategy of hybrid-PV energy systems,” Solar Energy, vol. 61, no. 2, pp. 77-87, Aug. 1997.