(Recycling near you) |
|||
| Line 1: | Line 1: | ||
==Recycling near you== | |||
Australia: | |||
*[http://www.recyclingnearyou.com.au/ Recycling Near You] - find recycling information by area and item. | |||
[[Category:Waste management]] | [[Category:Waste management]] | ||
Revision as of 13:31, 6 November 2006
Subcategories
This category has the following 5 subcategories, out of 5 total.
Pages in category "Recycling"
The following 200 pages are in this category, out of 201 total.
(previous page) (next page)3
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ar
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/es
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/fr
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ru
- 3D printed improved PET bottle stripper
- 3D printing a house
- 3D printing a house/zh
D
- Design and Implementation of 3-D Printed Radiation Shields for Environmental Sensors
- Design of a low-cost mobile multispectral albedometer with geopositioning and absolute orientation
- Distributed recycling of post-consumer plastic waste in rural areas
- Distributed recycling of post-consumer plastic waste in rural areas/fr
- Dumpster diving
E
- Ecoladrillo
- Ecoladrillo/es
- Ecoladrillo/id
- Ecoladrillo/ko
- Ecoladrillo/sv
- Ecoladrillo/tr
- Ecoladrillo/zh
- Economic Impact of DIY Home Manufacturing of Consumer Products with Low-cost 3D Printing from Free and Open Source Designs
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Ethical Filament Foundation
- Ethical Filament Foundation/fr
- Evaluation of lab performance of stamp sand and acrylonitrile styrene acrylate waste composites without asphalt as road surface materials
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament/fr
F
- Finding Ideal Parameters for Recycled Material Fused Particle Fabrication-Based 3D Printing Using an Open Source Software Implementation of Particle Swarm Optimization
- Free store
- Fuel briquettes
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/es
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/fr
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/hu
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/ru
G
H
- Hangprinter for Large Scale Additive Manufacturing using Fused Particle Fabrication with Recycled Plastic and Continuous Feeding
- Hangprinter for Large Scale Additive Manufacturing using Fused Particle Fabrication with Recycled Plastic and Continuous Feeding/ru
- Harvesting sheet metal
- High-shear mastication
- How to make a Tangram Puzzle from recycled materials
- How to make a Tangram Puzzle from recycled materials/es
L
- Leveraging Open Source Development Value to Increase Freedom of Movement of Highly Qualified Personnel
- Life cycle analysis of distributed polymer recycling
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament/es
- Low cost climate station for smart agriculture applications with photovoltaic energy and wireless communication
M
- Makaa:rafiki wa mazingira, mbadala wa kuni
- Makaa:rafiki wa mazingira, mbadala wa kuni/fr
- Making a can lantern
- Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing
- Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers
- Metal reclamation and recycling of electronic waste
- Metal reclamation and recycling of electronic waste/zh
- Template:MOST-recycle
- Multi-material distributed recycling via material extrusion: recycled high density polyethylene and poly (ethylene terephthalate) mixture
O
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/pt
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/vi
- Open Source Waste Plastic Granulator
- Open Source Waste Plastic Granulator/ar
- Open Source Waste Plastic Granulator/hu
- Open Source Waste Plastic Granulator/ja
- Open Source Waste Plastic Granulator/tr
- Open-Source Grinding Machine for Compression Screw Manufacturing
- Open-Source Grinding Machine for Compression Screw Manufacturing/de
- Open-Source Grinding Machine for Compression Screw Manufacturing/fr
- Open-Source Grinding Machine for Compression Screw Manufacturing/ru
- Open-Source Grinding Machine for Compression Screw Manufacturing/tr
- Open-Source Grinding Machine for Compression Screw Manufacturing/vi
- Optimal use of IV-fluid bags
P
- Parras recycling and reuse gallery
- Particle Swarm Optimization of Printing Parameters for Open-Source TIG-Based Metal 3D Printing
- PET Extrusion
- PET Extrusion/fa
- PET Extrusion/zh
- PET preparation protocol:MOST
- Plastic bank
- Plastic Bank Extruder v1.0
- Plastic Bank Extruder v1.0/es
- Plastic Bank Extruder v1.0/ro
- Plastic Bank Extruder v1.0/ru
- Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy
- Plastics recovery manual
- Polymer environmental-friendly resin
- Polymer environmental-friendly resin/de
- Polymer recycling codes for distributed manufacturing with 3-D printers
- Potential of distributed recycling from hybrid manufacturing of 3-D printing and injection molding of stamp sand and acrylonitrile styrene acrylate waste composite
- Producer responsibility and recycling solar photovoltaic modules
R
- RE3
- Recyclebot
- Recyclebot Cooling Fan Section
- Recyclebot Cooling Fan Section/hu
- Recyclebot v2.3
- Recyclebot v2.3/es
- Recyclebot v2.3/zh
- Recyclebot/es
- Recyclebot/fr
- Recyclebot/it
- Recyclebot/pt
- Recyclebot/ru
- Recyclebot/zh
- Recycled Polycarbonate and Polycarbonate/Acrylonitrile Butadiene Styrene Feedstocks for Circular Economy Product Applications with Fused Granular Fabrication-Based Additive Manufacturing
- Recycling and dengue fever in Sukunan, Indonesia
- Recycling building materials
- Recycling in Japan
- Recycling in Japan/ja
- Recycling of wind turbine blades
- Recycling of wind turbine blades/ko
- Recycling organic waste
- Reduce, reuse, repair and recycle
- Reduce, reuse, repair and recycle news
- Reduce, reuse, repair and recycle news/2010-2017
- Reduce, reuse, repair and recycle news/2018-2022
- Reduce, reuse, repair and recycle/es
- Reduce, reuse, repair and recycle/ru
- Redwood Discovery Museum inspirograph
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ar
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/cs
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/es
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/fr
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/it
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ja
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/pl
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/pt
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ro
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ru
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/tr
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/uk
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/zh
- Repurposing shipping crate siding
- Reuse your television competition
S
- SALIRAJA Yurt Project
- SALIRAJA Yurt Project/es
- Salvage
- Semiconductor recycling plant case study of a-Si:H photovoltaic manufacturing
- Semiconductor recycling plant case study of CdTe photovoltaic manufacturing
- Semiconductor recycling plant case study of CIS photovoltaic manufacturing
- Semiconductor recycling plant case study of CIS photovoltaic manufacturing/ko
- Semiconductor recycling plant case study of GaAs photovoltaic manufacturing
- Semiconductor recycling plant case study of GaAs photovoltaic manufacturing - case study
- Semiconductor recycling plant case study of InGaN photovoltaic manufacturing
- SIMS E-recycling
- Sunlight oven
- Sustainability and Feasibility Assessment of Distributed E-Waste Recycling using Additive Manufacturing in a Bi-Continental Context
- Systems Analysis Approach to Polyethylene Terephthalate and Olefin Plastics Supply Chains in the Circular Economy: A Review of Data Sets and Models
- Systems Analysis for PET and Olefin Polymers in a Circular Economy
T
- Technical and Economic Viability of Distributed Recycling of Low-density Polyethylene Water Sachets into Waste Composite Pavement Blocks
- Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades
- The Potential of Replacing Concrete with Sand and Recycled Polycarbonate Composites: Compressive Strength Testing
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
- Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks
V
- Viability of Recycling Copper Indium Gallium Selenide (CIGS) in Photovoltaic Cells
- Viability of recycling semiconductors in Apple iPhone 4S
- Viability of recycling semiconductors in Apple iPhone 4S/ko
- Viability of recycling semiconductors in Dell LCD PC monitors
- Viability of recycling semiconductors in imaging devices
- Viability of recycling semiconductors in Intel Processors
- Viability of recycling semiconductors in Intel Processors/es
- Viability of recycling semiconductors in LED Televisions
- Viability of recycling semiconductors in Pacemakers
- User:Vivamarxista
W
- Waste for life
- Waste Plastic Direct Extrusion Hangprinter
- Waste plastic extruder
- Waste plastic extruder/es
- Waste plastic extruder/fr
- Waste plastic extruder/pl
- Waste plastic extruder/ru
- Waste plastic extruder/uk
- Waste plastic extruder/zh
- Waste plastic extruder: Files
- Waste plastic extruder: Files/fr
- Waste plastic extruder: Files/it
- Waste plastic extruder: Files/vi
- We Recycle Solar, Inc.
- What to do with unwanted pallets
- What to do with unwanted pallets/fr
- Wick-based irrigation
- Wood Furniture Waste-Based Recycled 3-D Printing Filament
- Wood Furniture Waste-Based Recycled 3-D Printing Filament/fr
Media in category "Recycling"
The following 8 files are in this category, out of 8 total.
-
Bordado.jpg 1,200 × 1,600; 391 KB
-
Canguro 1.jpg 2,272 × 1,704; 828 KB
-
Canguro pana.jpg 1,600 × 1,200; 249 KB
-
Canguro.jpg 2,272 × 1,704; 784 KB
-
Canguros bordados .jpg 1,200 × 1,600; 225 KB
-
Chips2forrecycling.jpg 1,440 × 958; 129 KB
-
Dram-abs.jpg 1,641 × 886; 183 KB
-
Recyclebot.gif 600 × 238; 3.01 MB
