Pages in category "Polymers"
The following 126 pages are in this category, out of 126 total.
3
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ar
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/es
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/fr
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing/ru
- 3D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane
- 3D Printed SiOC(N) Ceramic Scaffolds for Bone Tissue Regeneration: Improved Osteogenic Differentiation of Human Bone Marrow‐Derived Mesenchymal Stem Cells
A
C
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing/it
D
E
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products/pt
- Evaluation of lab performance of stamp sand and acrylonitrile styrene acrylate waste composites without asphalt as road surface materials
- Expanded Microchannel Heat Exchanger: Finite Difference Modeling
F
- Factors effecting real-time optical monitoring of fused filament 3D printing
- Finding Ideal Parameters for Recycled Material Fused Particle Fabrication-Based 3D Printing Using an Open Source Software Implementation of Particle Swarm Optimization
- Fully dense SiOC(N) cellular structures by integrating FFF 3-D printing with polymer derived ceramics
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/es
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/fr
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/hu
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties/ru
G
H
I
L
- Life cycle analysis of distributed polymer recycling
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament/es
- Low-cost open source ultrasound-sensing based navigational support for visually impaired
- Low-cost open source ultrasound-sensing based navigational support for visually impaired/ko
M
- Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions
- Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers
- Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites
- Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites/fr
- Template:MOST-recycle
- Multi-material distributed recycling via material extrusion: recycled high density polyethylene and poly (ethylene terephthalate) mixture
O
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/pt
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/ru
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/vi
- Open Source Waste Plastic Granulator
- Open Source Waste Plastic Granulator/ar
- Open Source Waste Plastic Granulator/hu
- Open Source Waste Plastic Granulator/ja
- Open Source Waste Plastic Granulator/tr
- Open-Source Grinding Machine for Compression Screw Manufacturing
- Open-Source Grinding Machine for Compression Screw Manufacturing/de
- Open-Source Grinding Machine for Compression Screw Manufacturing/fr
- Open-Source Grinding Machine for Compression Screw Manufacturing/ru
- Open-Source Grinding Machine for Compression Screw Manufacturing/tr
- Open-Source Grinding Machine for Compression Screw Manufacturing/vi
- Open-source polylactic acid production
- Open-source polylactic acid production/id
- Open-source polylactic acid production/Research Questions
- Open-Source Script for Design and 3D Printing of Porous Structures for Soil Science
P
- Parametric Open Source Cold-Frame Agrivoltaic Systems
- Plastic codes
- Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy
- Plastics recovery manual
- Polymer recycling codes for distributed manufacturing with 3-D printers
- Polymer-derived SiOC Replica of Material Extrusion-based 3-D Printed Plastics
- Potential of distributed recycling from hybrid manufacturing of 3-D printing and injection molding of stamp sand and acrylonitrile styrene acrylate waste composite
R
- Recyclebot
- Recyclebot/es
- Recyclebot/fr
- Recyclebot/it
- Recyclebot/pt
- Recyclebot/ru
- Recyclebot/zh
- Recycled Polycarbonate and Polycarbonate/Acrylonitrile Butadiene Styrene Feedstocks for Circular Economy Product Applications with Fused Granular Fabrication-Based Additive Manufacturing
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ar
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/cs
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/es
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/fr
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/it
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ja
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/pl
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/pt
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ro
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/ru
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/tr
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/uk
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament/zh
S
- Self-healing Polymer Composites
- Sustainability and Feasibility Assessment of Distributed E-Waste Recycling using Additive Manufacturing in a Bi-Continental Context
- Systems Analysis Approach to Polyethylene Terephthalate and Olefin Plastics Supply Chains in the Circular Economy: A Review of Data Sets and Models
- Systems Analysis for PET and Olefin Polymers in a Circular Economy
T
- Technical and Economic Viability of Distributed Recycling of Low-density Polyethylene Water Sachets into Waste Composite Pavement Blocks
- Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing
- The Effects of PLA Color on Material Properties of 3-D Printed Components
- The Potential of Replacing Concrete with Sand and Recycled Polycarbonate Composites: Compressive Strength Testing
- Thermal Post-Processing of 3-D Printed Polypropylene Parts for Vacuum Systems
- Thermal properties of 3-D printed polylactic acid-metal composites
- Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
- Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks
V
W
Y
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities/cs
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities/fr
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities/ja
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities/zh