Subcategories
This category has the following 3 subcategories, out of 3 total.
Pages in category "Materials"
The following 148 pages are in this category, out of 148 total.
3
A
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices
- A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications
- Ambiance-dependent Agglomeration and Surface-enhanced Raman Spectroscopy Response of Self-assembled Silver Nano-particles for Plasmonic Photovoltaic Devices
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens
- Ash
- Atomic layer deposited aluminium oxide mitigates outgassing from fused filament fabrication–based 3-D printed components
B
C
- Cattail Chemurgy
- Caulk
- CCAT clothes drying
- CCAT decomisioned bamboo construction
- CCAT decomisioned bamboo construction/es
- CCAT decomisioned bamboo construction/id
- CCAT Stabilized Earthen Terrace 2017
- CCAT Stabilized Earthen Terrace 2017/ko
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Clay
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing/it
- Composites in the Aircraft Industry
- Composites in the Aircraft Industry/ar
- Composites in the Aircraft Industry/az
- Composites in the Aircraft Industry/cs
- Composites in the Aircraft Industry/es
- Composites in the Aircraft Industry/fr
- Composites in the Aircraft Industry/he
- Composites in the Aircraft Industry/hu
- Composites in the Aircraft Industry/id
- Composites in the Aircraft Industry/it
- Composites in the Aircraft Industry/ko
- Composites in the Aircraft Industry/nl
- Composites in the Aircraft Industry/pl
- Composites in the Aircraft Industry/pt
- Composites in the Aircraft Industry/ro
- Composites in the Aircraft Industry/ru
- Composites in the Aircraft Industry/sk
- Composites in the Aircraft Industry/tr
- Composites in the Aircraft Industry/uk
- Composites in the Aircraft Industry/vi
- Composites in the Aircraft Industry/zh
- Compost bin
- Compost bin/ko
- Compostera
- Compostera/es
- Composting
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells
- Cordage
D
E
- Earth sheltered building
- Earthships
- Earthships/es
- Earthships/vi
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films
- Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells
- User:Elhammoudy Abdelfattah
- Enhanced Dye-Sensitized Solar Cell Performance using Strontium Titanate Perovskite Integrated Photoanodes Modified with Plasmonic Silver Nanoparticles
- Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography
- Expanding the Consumer Bill of Rights for material ingredients
F
I
- ICF walls
- Image Analysis Method for Quantifying Snow Losses on PV Systems
- Impact of Coupled Plasmonic Effect with Multishaped Silver Nanoparticles on Efficiency of Dye Sensitized Solar Cells
- Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices
- Inhibition of growth of S. epidermidis by hydrothermally synthesized ZnO nanoplates
- Insulating walls
L
- La Yuca schoolroom renovation
- La Yuca schoolroom renovation/ko
- Las Malvinas ecoladrillo schoolroom
- Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices
- Literature review of Physical Properties of Ternary semiconductors
- Literature review of Physical Properties of Ternary semiconductors/ko
M
- Mechanical and economic analysis of conventional aluminum photovoltaic module frames, frames with side holes, and open-source downward-fastened frames for non-traditional racking
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins
- Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites
- Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites/fr
- Microwave-Assisted Synthesized Gadolinium Doped Barium Strontium Titanate Nanostructures: Structural and Optical Properties for DSSC Applications
O
- Open-source 3-D printing materials database generator
- Open-source 3-D printing materials database generator/zh
- Open-source parametric 3-D printed slot die system for thin film semiconductor processing
- Open-source polylactic acid production
- Open-source polylactic acid production/id
- Open-source polylactic acid production/Research Questions
- Open-Source Script for Design and 3D Printing of Porous Structures for Soil Science
- Optimal Design of Thin-film Plasmonic Solar Cells using Differential Evolution Optimization Algorithms
- Optoelectronic Properties: Carrier Transport, Recombination, and Stability
P
- Paper
- Parametric Open Source Cold-Frame Agrivoltaic Systems
- Peanut shaped ZnO microstructures: controlled synthesis and nucleation growth toward low-cost dye sensitized solar cells
- Physical Resources
- Physical Resources/ur
- Plasmonic enhancement of amorphous silicon solar photovoltaic cells with hexagonal silver arrays made with nanosphere lithography
- Polymer-derived SiOC Replica of Material Extrusion-based 3-D Printed Plastics
R
S
- Scalable honeycomb top contact to increase the light absorption and reduce the series resistance of thin film solar cells
- SELF/Materials database/Materials/Cotton fiber
- SELF/Materials database/Materials/Polylactic acid (PLA)
- SELF/Materials database/Materials/Press n Seal
- SELF/Materials database/Materials/SLA resin
- SELF/Materials database/Submission example
- Straw bale construction
- Structural supports for vegetables
T
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing
- The use of urea as an N-doping 3D hierarchical preserving agent for titanium dioxide nanostructures tailored for dye-sensitized solar cells
- Thermal Post-Processing of 3-D Printed Polypropylene Parts for Vacuum Systems
U
V
Y
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities/cs
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities/fr
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities/ja
- Ystruder: open source multifunction extruder with sensing and monitoring capabilities/zh
Media in category "Materials"
The following 4 files are in this category, out of 4 total.
-
Duct Tape.jpg 300 × 168; 6 KB
-
Edgetech Industries LLC.png 3,079 × 2,968; 590 KB
-
Molybdenum electrodes.jpg 3,632 × 2,992; 1.25 MB
-
PtIr marker bands.jpg 4,056 × 3,272; 1.16 MB