Car Heater-Vent Hanger
Project developed by Eric Benson
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
This is a device that clips into the heater vents for anyone who owns a car. For an example, this hanger can be used to dry out gloves or similar items after a day in the snow.
Bill of Materials
1. PLA Filament
Tools needed for fabrication of the OSAT
Razor blade to get it off the print bed if you have good adhesion.
Skills and Knowledge Necessary to Make the OSAT
This device can be used by simply printing the part and then attaching it to the vent in car.
Technical Specifications and Assembly Instructions
FreeCad Files and STL Files for all Components are Located on YouMagine
Link Here for STL and FreeCAD Files
- Print out the necessary file (Car Heater-Vent Hanger)
- Install the part in your car's heater vent
- Hang any object that your heater vents can support.
-
Image 1
-
Image 2
-
Image 3
Common Problems and Solutions
- Modifications may be necessary for different vehicles with different sized vents.
Cost savings
Plastic Used in Printing =~ $0.11