No edit summary
Line 29: Line 29:
The load for a system is the end use, the appliance or system that uses the power from the battery that was generated by the solar panels. The load determines the amount of energy required from the system and therefore dictates the size of the system needed. For example a 50 watt light bulb will require a significantly smaller PV system than an entire house.  
The load for a system is the end use, the appliance or system that uses the power from the battery that was generated by the solar panels. The load determines the amount of energy required from the system and therefore dictates the size of the system needed. For example a 50 watt light bulb will require a significantly smaller PV system than an entire house.  


====Environment====
====Design efficiencies====
When talking about solar panels more specifically past and future uses, design efficiencies of the panels themselves is an important factor to consider. It is said that panels today are becoming harder and harder to disassemble which could be bad if you would want to recycle them after their use. But this could also be a good thing if the user wanted to reuse the panels for a different project afterwards. Reusing panels would somewhat force “design implications” in that if more panels are reused, it would generate a response to design panels to last longer and be updated to allow for easy refurbishment or parts replacement.<Ref>http://humboldt-dspace.calstate.edu/bitstream/handle/10211.3/124757/McKeown_Kyle_Sum2014.pdf?sequence=1</Ref>


====Partial Shading====
Partial Shading and mismatch losses are also something to consider when thinking about solar panels. In an analysis it was found that in an area that has slightly higher shade than average area showed a performance reduction of about 22% due to shading. This shading can be from anything such as building all the way to trees. Of that 22%, 70% was from the actual shading while the remaining 30% was power loss because of mismatch of current and voltage. There are suggestions to help alleviate some of the loss but ultimately is going to come down to the system you are working with.<Ref>https://www.nrel.gov/docs/fy11osti/50003.pdf</Ref>
====tilt angles====
The tilt angles of the solar panels is also something to consider. The angle of the tilt can affect the overall annual energy yield of the whole system. And has a lot of different parts or elements that influence it. These elements can include but are not limited to the latitude, “clear-ness index”, air conditions, and climate condition. Moreover, the annual optimum tilt angle is almost shifted by 10°with respect to the latitude of the location.<Ref>https://reader.elsevier.com/reader/sd/pii/S0038092X12000953?token=D86CBD7A38EED93094BF9C2C9A3BC3C63F3CCA48760DC0A834D993C1F29E69D9E79889FA7F62F6F339E12077CD163826
</Ref>


===Designing interpretive materials===
===Designing interpretive materials===

Revision as of 07:58, 17 February 2020

Template:305inprogress

Background

The Campus Center for Appropriate Technology located on Humboldt State University in California has an extra amount of solar panels but they are unsure what to use them for. As a team we will attempt to construct some kind of solar bug out box to help students when black outs occur. This bug out box will need to be mobile and be able to charge batteries which students can then use for whatever they need.

Solar 1.jpg

Problem statement=

The objective of this project is to create an easily digested bug out box made with solar panels from ccat. This box will harness photovoltaic energy so that the users can charge various devices and possibly run appliances. As a group we hope that we can make a box that is easily remade with simple instructions that creates enough usable energy to be a reasonable alternative to using a car battery during a time of no power.

Literature Review

This is a review of the available literature pertinent to the a specific project.

Solar Power basics

A simple photovoltaic(PV) system consists of one or more solar panels(a solar array), a charge controller and a battery or battery bank. While the sun hits the solar panels, those panels turn energy from the sunlight into direct current(DC) electricity which is then stored in the battery. The charge controller regulates the flow of electricity to and from the battery, preventing the electricity from flowing out of the battery back to the solar array as well as preventing overcharging of the battery. An inverter may be required to convert the electricity from DC to AC(Alternating Current) depending on what is being powered.[1] The amount of power produced by a PV system depends on the size, efficiency and amount of light received by the solar panels.

Solar Power concerns

The biggest problem with solar power is the fact that it will not generate any electricity without sunlight. A PV system will produce minimal to no power during nights, cloudy days and in shaded areas. Solar energy may not be the right answer for an individuals energy needs if they are in an area with limited exposure to sunlight. Solar panels have limited efficiency as well, with the most efficient solar panel converting roughly 22% of energy from sunlight into usable energy. Most solar panels fall within a 16-20% efficiency range. [2]

Components of Solar Power

In depth information about the different components of a photovoltaic system and what we will use for our project. [3]

Solar Panels

Solar panels are composed of many individual cells called solar cells. Solar cells are composed of semiconductor materials which generate energy when light hits the cell, the sum of which is the total energy produced by the panel. [4] The ability of a solar panel to convert sunlight into usable energy is called its efficiency, which ranges from 15% to nearly 23%. It is also important to consider that sunlight is required to strike the solar cells in order for the solar panels to generate energy so optimal placing of the panels to receive as much sunlight as possible is crucial. Shade can decrease energy output by more than 50% [5]

Batteries

The battery is where all the energy generated from the solar panels is stored. Depending on the individuals energy needs, different sizes of batteries will be required. A larger PV system will require a battery with a higher storage capacity, or will require hooking up multiple batteries to the system creating a battery bank. A batteries capacity is the total amount of energy a battery can store, typically measured in kilowatt hours(kWh). Batteries also have a depth of discharge which is the amount of energy that should be used so that some is left over, so that the battery is never fully drained. [6]

Load

The load for a system is the end use, the appliance or system that uses the power from the battery that was generated by the solar panels. The load determines the amount of energy required from the system and therefore dictates the size of the system needed. For example a 50 watt light bulb will require a significantly smaller PV system than an entire house.

Design efficiencies

When talking about solar panels more specifically past and future uses, design efficiencies of the panels themselves is an important factor to consider. It is said that panels today are becoming harder and harder to disassemble which could be bad if you would want to recycle them after their use. But this could also be a good thing if the user wanted to reuse the panels for a different project afterwards. Reusing panels would somewhat force “design implications” in that if more panels are reused, it would generate a response to design panels to last longer and be updated to allow for easy refurbishment or parts replacement.[7]

Partial Shading

Partial Shading and mismatch losses are also something to consider when thinking about solar panels. In an analysis it was found that in an area that has slightly higher shade than average area showed a performance reduction of about 22% due to shading. This shading can be from anything such as building all the way to trees. Of that 22%, 70% was from the actual shading while the remaining 30% was power loss because of mismatch of current and voltage. There are suggestions to help alleviate some of the loss but ultimately is going to come down to the system you are working with.[8]

tilt angles

The tilt angles of the solar panels is also something to consider. The angle of the tilt can affect the overall annual energy yield of the whole system. And has a lot of different parts or elements that influence it. These elements can include but are not limited to the latitude, “clear-ness index”, air conditions, and climate condition. Moreover, the annual optimum tilt angle is almost shifted by 10°with respect to the latitude of the location.[9]

Designing interpretive materials

According to ______ interpretive materials for composting should include....

References

Cookies help us deliver our services. By using our services, you agree to our use of cookies.