This page is a tutorial intended to show a simple method of applying a flat design to match a curved surface in Blender.

There are many ways to get a flat design or photo extruded. However, this page will not highlight these methods. If you are interested in extruding a flat image to use in the next steps, download Inkscape and a generate path to OpenSCAD extension. There are numerous pages dedicated to this method, so google away!

Step 1

  • Import the .stl files you intend to use. For the purposes of this tutorial, I simply generated a sphere and imported a Michigan Tech Logo .stl that I

generated using Inkscape to OpenSCAD. You can find the import path in Figure 1.

Figure 1.









Step 2

  • In Blender, after your .stl is uploaded, translate the .stl's so you can see both. Sometimes during an import, you may have to scale or translate the .stl you have imported.
  • Once you can see both objects, scale your flat extrude in the face direction. For example, Figures 2 and 3 show a before and after. I scaled the Michigan Tech Logo .stl in ONLY THE Y DIRECTION. This extended my logo extrude to where I can have the entire surface of the sphere covered when intersecting the logo .stl. This part will make more sense if you view Figure 5 found in Step 3.
  • Some useful shortcuts to use in blender:
    • to scale in a given direction, press S on the keyboard, then press X, Y, or Z on the keyboard to select a scaling direction. Simply type or move your mouse for the magnitude of the scale.
    • to translate in a given direction, press G on the keyboard, then press X, Y, or Z on the keyboard to select a translation direction. Simply type or move your mouse for the magnitude of the translation.
Figure 2.
Figure 3.

Step 3

  • After extruding the logo to the thickness needed, translate the logo so that it COMPLETELY intersects through the curved surface. If you are doing this on a cylinder, make sure to only go through ONE wall. DO NOT extrude all the way through the other side wall. Notice how in Figure 5, the extrude goes in one side of the sphere and does not come out the other. Be careful to only extrude to completely intersect the curved surface.
  • Figures 4, 5, and 6 show how to intersect with the curved surface. Refer to Step 2 for shortcuts in translating.
Figure 4.
Figure 5.
Figure 6.

























Step 4

  • After your part is aligned and intersected with the curved surface, select the wrench as shown by the red circle in Figure 7.
  • Make sure your logo or design .stl is selected in the top right window, as shown by a red circle in Figure 9.
    • Your part should have an orange highlight around it.
  • As shown in Figure 8, click add modifier, then select Boolean.
  • Shown in Figure 9 with two red circles, select Intersect and the curved object.
    • Your logo or design should be in orange matching the curvature of the curved surface.
  • Click Apply.


Figure 7.
Figure 8.
Figure 9.

























Step 5

  • After completing the intersect boolean operation, select your logo or design again. You'll notice now that it has the same curve as the surface of the curved object as shown in Figure 10.
  • Scale the logo or design by 1.1 in the face direction. In my example, I scaled by 1.1 in the Y direction, as shown in Figure 11.
    • Refer to Step 2 for scaling shortcuts
  • Translate the logo or design by a small amount(to make up for the cross over from scaling) in the face direction, outward away from the curved surface. In my example, I translated by -1.0 in the Y direction as shown in Figure 12.
    • Refer to Step 2 for translating shortcuts
Figure 10.
Figure 11.
Figure 12.

























Step 6

  • At this point, the shape you want should be achieved. The rest of this step is cleanup.
  • As shown in Figure 13, select your curved object, NOT your logo or design.
  • Select Add Modifier and choose boolean, the same process as in Figure 8.
  • Select Union and your logo or design as shown by the Red circles in Figure 13.
  • Click Apply
  • Now select your logo or design on the top right hand window.
    • Right click and delete the logo or design object.
      • Your logo should still be in place because of the union even after deleting the object
  • Your final design should have a top right window as shown in Figure 14.
Figure 13.
Figure 14.

















Step 7

  • Once your design is complete, export it as an .stl as shown in Figure 15.
Figure 15.









Final Result

  • This is the final result of this tutorial. I've done several similar designs with mugs and controllers and such, so I can confirm this works with many different curved surfaces.
Figure 16.
Figure 17.
Figure 18.
Retrieved from "https://www.appropedia.org/w/index.php?title=Blender_Design_on_Curved_Surfaces_Tutorial&oldid=374238"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.