No edit summary
m (Text replacement - "|documentation-language=eng " to "|documentation-language=English ")
Line 26: Line 26:
|estimated-cost-currencyUSD
|estimated-cost-currencyUSD
|sustainable-development-goal=Sustainable Development Goal 8
|sustainable-development-goal=Sustainable Development Goal 8
|documentation-language=eng
|documentation-language=English
}}
}}
<!--end infobox-->
<!--end infobox-->

Revision as of 14:43, 17 July 2020

FA info icon.svg Angle down icon.svg Device data
Hardware license CERN-OHL-S
Certifications Start OSHWA certification

Bike Chain Tensioner

Project developed by User:Spoonless

Template:Statusboxtop Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

This chain tensioner can be used to address issues with chain hopping, chain slap, and rattles. It can be printed and assembled for less than $6, and offers equivalent perfomance to comercial products sold for $30.

ChainTensioner.jpg

Bill of Materials

  1. Tensioner.scad
  2. (2) ZipTies
  3. (1) 8-32 Thread, 1-1/4" Length Machine Screw (eg. McMasterCarr:91792A201)
  4. (1) 8-32 Thread Locknut (eg. McMasterCarr:91831a009)

Tools needed for fabrication of the OSAT

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. Screwdriver
  3. Adjustable Wrench or Pliers

Skills and Knowledge Necessary to Make the OSAT

  • Ability to use a 3d printer.
  • Ability to use a wrench and screwdriver.

Technical Specifications and Assembly Instructions

All parts are symetric such that component orientation is not an issue.

Assembly:

  1. Ziptie the cage to the Bicycle frame just above chain.
  2. Hold the chain up so it is captured in the cage.
  3. Bolt the pully in place
  4. gently crank the pedals by hand and shift throug all gears to ensure nothing is binding

Common Problems and Solutions

  • If the fit to they bicycle is loose or overly tight the OpenScad variable "pipeDia" can be set to match your bike frame's tubing diameter.

Cost savings

  • Approximatly $23.50 (78.3%)
    • 30g of PLA at approx. $30/kg = $0.90
    • Machine Screw, Locknut, and bag of zip ties approx $5.60 at local hardware store
    • Equivalent Chain Tesnsioner: Bionicon C.GUIDE approx. $30
    • 30 - (5.60 + 0.90) = $23.50
Cookies help us deliver our services. By using our services, you agree to our use of cookies.