J.M.Pearce (talk | contribs) m (→Cost savings) |
Kathy Nativi (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
{{777}} | {{777}} | ||
<!--infobox--> | |||
{{OpenKhowHowManifest | |||
|manifest-date-created= | |||
|manifest-date-updated=2020-06-04 | |||
|manifest-author-name=Kathy Nativi | |||
|manifest-author-affiliation=Appropedia | |||
|manifest-autho-email=info@appropedia.org | |||
|title=Bike Chain Tensioner | |||
|description=This chain tensioner can be used to address issues with chain hopping, chain slap, and rattles. | |||
|intended-use=hobbyism | |||
|keywords= | |||
|project-link= | |||
|contact-affiliation=MOST | |||
|contact-appropedia-user=User:Spoonless | |||
|image=ChainTensioner.jpg | |||
|development-stage= | |||
|made=No | |||
|made-independently=No | |||
|derivative-of= | |||
|manufacturing-files= | |||
|manifest-language=eng | |||
|date-published= | |||
|main-materials=Plastic | |||
|estimated-cost-amount= 23.50 | |||
|estimated-cost-currencyUSD | |||
|sustainable-development-goal=Sustainable Development Goal 8 | |||
|documentation-language=eng | |||
}} | |||
<!--end infobox--> | |||
==Bike Chain Tensioner== | ==Bike Chain Tensioner== | ||
Project developed by [[User:Spoonless]] | Project developed by [[User:Spoonless]] |
Revision as of 00:33, 12 June 2020
Bike Chain Tensioner
Project developed by User:Spoonless
Template:Statusboxtop Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
This chain tensioner can be used to address issues with chain hopping, chain slap, and rattles. It can be printed and assembled for less than $6, and offers equivalent perfomance to comercial products sold for $30.
Bill of Materials
- Tensioner.scad
- (2) ZipTies
- (1) 8-32 Thread, 1-1/4" Length Machine Screw (eg. McMasterCarr:91792A201)
- (1) 8-32 Thread Locknut (eg. McMasterCarr:91831a009)
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
- Screwdriver
- Adjustable Wrench or Pliers
Skills and Knowledge Necessary to Make the OSAT
- Ability to use a 3d printer.
- Ability to use a wrench and screwdriver.
Technical Specifications and Assembly Instructions
All parts are symetric such that component orientation is not an issue.
Assembly:
- Ziptie the cage to the Bicycle frame just above chain.
- Hold the chain up so it is captured in the cage.
- Bolt the pully in place
- gently crank the pedals by hand and shift throug all gears to ensure nothing is binding
Common Problems and Solutions
- If the fit to they bicycle is loose or overly tight the OpenScad variable "pipeDia" can be set to match your bike frame's tubing diameter.
Cost savings
- Approximatly $23.50 (78.3%)
- 30g of PLA at approx. $30/kg = $0.90
- Machine Screw, Locknut, and bag of zip ties approx $5.60 at local hardware store
- Equivalent Chain Tesnsioner: Bionicon C.GUIDE approx. $30
- 30 - (5.60 + 0.90) = $23.50